GPUDirect RDMA is a technology in NVIDIA GPUs that enables direct data exchange between GPUs and a third-party peer device using PCI Express. The third-party devices could be network interfaces such as NVIDIA ConnectX SmartNICs or BlueField DPUs, storage adapters (for GPUDirect Storage) or video acquisition adapters.
To support GPUDirect RDMA, a userspace CUDA APIs and kernel mode drivers are required. Starting with
CUDA 11.4 and R470 drivers, a
new kernel module
nvidia-peermem is included in the standard NVIDIA driver installers (e.g.
kernel module provides Mellanox Infiniband-based HCAs direct peer-to-peer read and write access to the GPU’s memory.
In conjunction with the Network Operator, the GPU Operator can be used to
set up the networking related components such as Mellanox drivers,
nvidia-peermem and Kubernetes device plugins to enable
workloads to take advantage of GPUDirect RDMA. Refer to the Network Operator documentation
on installing the Network Operator.
First, install the Network Operator on the system to ensure that the MOFED drivers are setup in the system.
With v1.8, the GPU Operator provides an option to load the
nvidia-peermem kernel module during the bootstrap of the NVIDIA driver daemonset.
$ helm install --wait --generate-name \ nvidia/gpu-operator \ --set driver.rdma.enabled=true
During the installation, an initContainer is used with the driver daemonset to wait on the Mellanox OFED (MOFED) drivers to be ready. This initContainer checks for Mellanox NICs on the node and ensures that the necessary kernel symbols are exported MOFED kernel drivers. Once everything is in place, the container nvidia-peermem-ctr will be instantiated inside the driver daemonset.
$ kubectl describe pod -n gpu-operator-resources nvidia-driver-daemonset-xxxx <snip> Init Containers: mofed-validation: Container ID: containerd://5a36c66b43f676df616e25ba7ae0c81aeaa517308f28ec44e474b2f699218de3 Image: nvcr.io/nvidia/cloud-native/gpu-operator-validator:v1.8.1 Image ID: nvcr.io/nvidia/cloud-native/gpu-operator-validator@sha256:7a70e95fd19c3425cd4394f4b47bbf2119a70bd22d67d72e485b4d730853262c <snip> Containers: nvidia-driver-ctr: Container ID: containerd://199a760946c55c3d7254fa0ebe6a6557dd231179057d4909e26c0e6aec49ab0f Image: nvcr.io/nvaie/vgpu-guest-driver:470.63.01-ubuntu20.04 Image ID: nvcr.io/nvaie/vgpu-guest-driver@sha256:a1b7d2c8e1bad9bb72d257ddfc5cec341e790901e7574ba2c32acaddaaa94625 <snip> nvidia-peermem-ctr: Container ID: containerd://0742d86f6017bf0c304b549ebd8caad58084a4185a1225b2c9a7f5c4a171054d Image: nvcr.io/nvaie/vgpu-guest-driver:470.63.01-ubuntu20.04 Image ID: nvcr.io/nvaie/vgpu-guest-driver@sha256:a1b7d2c8e1bad9bb72d257ddfc5cec341e790901e7574ba2c32acaddaaa94625 <snip>
To validate that nvidia-peermem-ctr has successfully loaded the nvidia-peermem module, you can use the following command:
$ kubectl logs -n gpu-operator-resourcesnvidia-driver-daemonset-xxx -c nvidia-peermem-ctr waiting for mellanox ofed and nvidia drivers to be installed waiting for mellanox ofed and nvidia drivers to be installed successfully loaded nvidia-peermem module
For more information on
nvidia-peermem, refer to the documentation.
The following Linux distributions are supported:
Ubuntu 20.04 LTS
The following NVIDIA drivers are supported:
R470 datacenter drivers (470.57.02+)
Refer to the following resources for more information: #. GPUDirect RDMA: https://docs.nvidia.com/cuda/gpudirect-rdma/index.html #. NVIDIA Network Operator: https://github.com/Mellanox/network-operator #. Blog post on deploying the Network Operator: https://developer.nvidia.com/blog/deploying-gpudirect-rdma-on-egx-stack-with-the-network-operator/