Normalize Operator

This shows you how to use the Normalize operator.

Introduction

Normalization is the process of shifting and scaling the data values to match the desired distribution. It calculates the mean \(\mu\) and the standard deviation \(\sigma\) and modifies the data as follows:

\[Y_i = \frac{X_i - \mu}{\sigma}\]

There are more advanced features in Normalize that will be explained later in this documentation.

Using the Normalize Operator

We need some boilerplate code to import DALI and some other useful libraries and to visualize the results.

[1]:
from nvidia.dali.pipeline import Pipeline
import math
import nvidia.dali.ops as ops
import nvidia.dali.fn as fn
import nvidia.dali.types as types
import nvidia.dali.backend as backend

batch_size = 10
image_filename = "../data/images"

import matplotlib.pyplot as plt
import matplotlib.gridspec as gridspec

def display(outputs, idx, columns = 2, captions = None):
    rows = int(math.ceil(len(outputs) / columns))
    fig = plt.figure()
    fig.set_size_inches(16, 6 * rows)
    gs = gridspec.GridSpec(rows, columns)
    row = 0
    col = 0
    for i, out in enumerate(outputs):
        if isinstance(out, backend.TensorListGPU):
            out = out.as_cpu()
        plt.subplot(gs[i])
        plt.axis("off")
        if captions is not None:
            plt.title(captions[i])
        plt.imshow(out.at(idx));

def show(pipe, idx, columns = 2, captions = None):
    pipe.build()
    display(pipe.run(), idx, columns, captions)

A Simple Pipeline

Create a simple pipeline that just loads some images and normalizes them, and treats the image data as a flat array that contains 3*W*H numbers (3 for RGB channels).

[2]:
pipe = Pipeline(batch_size=batch_size, num_threads=1, device_id=0)
with pipe:
    jpegs, _ = fn.readers.file(file_root=image_filename)
    images = fn.decoders.image(jpegs, device="mixed", output_type=types.RGB)
    norm = fn.normalize(images)

    pipe.set_outputs(images, norm)
[3]:
show(pipe, 1)
Clipping input data to the valid range for imshow with RGB data ([0..1] for floats or [0..255] for integers).
../../_images/examples_general_normalize_6_1.svg

Adjusting Output Dynamic Range

As you can see in the example above, the image intensity values have been scaled and shifted, with many pixels forced below 0, and displayed as black. You might want this result in many use cases, but if the output type has limited dynamic range (for example uint8), you might want to map the mean and standard deviation to values that more effectively use that limited range of values. For this purpose, Normalize offers two scalar arguments, shift and scale. Now the normalization formula becomes:

\[Y_i = \frac{X_i - \mu}{\sigma} \cdot {scale} + {shift}\]

Modify the pipeline to produce uint8 output with the mean mapped to 128 and standard deviation to 64, which allows values in the \(\mu \pm 2\sigma\) range to be correctly represented in the output.

[4]:
pipe = Pipeline(batch_size=batch_size, num_threads=1, device_id=0)
with pipe:
    jpegs, _ = fn.readers.file(file_root=image_filename)
    images = fn.decoders.image(jpegs, device="mixed", output_type=types.RGB)
    norm = fn.normalize(images, scale=64, shift=128, dtype=types.UINT8)

    pipe.set_outputs(images, norm)
[5]:
show(pipe, 1)
../../_images/examples_general_normalize_9_0.svg

Directional Reductions

For multidimensional data, it might be useful to calculate the mean and standard deviation for only a subset of the dimensions. For example, the dimensions might correspond to height (0), width (1) and color channels (2) of an image. Reducing the 0, 1 (height, width) dimensions will produce a separate mean and standard deviation for each channel. Normalize supports two arguments to specify directions:

  • axes - a tuple of dimension indices, with 0 being outermost.

  • axis_names - axis symbols that were looked up in the input layout.

The following example normalizes the data along WC, H, WH and C.

[6]:
pipe = Pipeline(batch_size=batch_size, num_threads=1, device_id=0)
with pipe:
    jpegs, _ = fn.readers.file(file_root=image_filename)
    images = fn.decoders.image(jpegs, device="mixed", output_type=types.RGB)
    normwc  = fn.normalize(images, axes = (1, 2), scale=64, shift=128, dtype=types.UINT8)
    normh  = fn.normalize(images, axis_names = "H", scale=64, shift=128, dtype=types.UINT8)
    normhw = fn.normalize(images, axis_names = "HW", scale=64, shift=128, dtype=types.UINT8)
    normc  = fn.normalize(images, axes = (2,), scale=64, shift=128, dtype=types.UINT8)

    pipe.set_outputs(images, normwc, normh, normhw, normc)
[7]:
titles = ["Original", "Width and channels", "Height", "Height and width", "Channel"]
show(pipe, 9, captions=titles)
../../_images/examples_general_normalize_12_0.svg

Externally Provided Parameters

By default, Normalize calculates the mean and standard deviation internally. However, these values can be provided externally via the mean and stddev arguments, and can be scalar values or inputs. When providing mean or stddev values as inputs, the directions of reduction can be inferred from parameter’s shape. If the mean and stddev values are inputs, they must have the same shapes.

[8]:
pipe = Pipeline(batch_size=batch_size, num_threads=1, device_id=0)
with pipe:
    jpegs, _ = fn.readers.file(file_root=image_filename)
    images = fn.decoders.image(jpegs, device="mixed", output_type=types.RGB)
    norm_mean = fn.normalize(
        images, mean=64, axis_names="HW", scale=64, shift=128, dtype=types.UINT8)
    norm_stddev = fn.normalize(
        images, stddev=200, axis_names="HW", scale = 64, shift=128, dtype=types.UINT8)

    pipe.set_outputs(images, norm_mean, norm_stddev)
[9]:
show(pipe, 1, captions=["Original", "Fixed mean", "Fixed standard deviation"])
../../_images/examples_general_normalize_15_0.svg

Batch Normalization

Normalize can calculate the mean and standard deviation for the entire batch instead of on a per-item basis. You can enable this behavior by setting the batch argument to True. Batch normalization demands that the extent of the non-reduced dimensions matches all samples in the batch. For example, because channels are normalized separately, the pipeline below expects that all images have three channels.

[10]:
pipe = Pipeline(batch_size=batch_size, num_threads=1, device_id=0)
with pipe:
    jpegs, _ = fn.readers.file(file_root=image_filename)
    images = fn.decoders.image(jpegs, device="mixed", output_type=types.RGB)
    norm_sample = fn.normalize(
        images, batch=False, axis_names="HW", scale=64, shift=128, dtype=types.UINT8)
    norm_batch = fn.normalize(
        images, batch=True, axis_names="HW", scale = 64, shift=128, dtype=types.UINT8)

    pipe.set_outputs(images, norm_sample, norm_batch)
[11]:
show(pipe, 1, columns=3, captions=["Original", "Per-sample normalization", "Batch normalization"])
show(pipe, 4, columns=3, captions=["Original", "Per-sample normalization", "Batch normalization"])
show(pipe, 7, columns=3, captions=["Original", "Per-sample normalization", "Batch normalization"])
show(pipe, 9, columns=3, captions=["Original", "Per-sample normalization", "Batch normalization"])
../../_images/examples_general_normalize_18_0.svg
../../_images/examples_general_normalize_18_1.svg
../../_images/examples_general_normalize_18_2.svg
../../_images/examples_general_normalize_18_3.svg