riva/proto/riva_asr.proto
riva/proto/riva_asr.proto#
-
service RivaSpeechRecognition
The RivaSpeechRecognition service provides two mechanisms for converting speech to text.
- rpc RecognizeResponse Recognize(RecognizeRequest)
Recognize expects a RecognizeRequest and returns a RecognizeResponse. This request will block until the audio is uploaded, processed, and a transcript is returned.
- rpc stream StreamingRecognizeResponse StreamingRecognize(stream StreamingRecognizeRequest)
StreamingRecognize is a non-blocking API call that allows audio data to be fed to the server in chunks as it becomes available. Depending on the configuration in the StreamingRecognizeRequest, intermediate results can be sent back to the client. Recognition ends when the stream is closed by the client.
- rpc RivaSpeechRecognitionConfigResponse GetRivaSpeechRecognitionConfig(RivaSpeechRecognitionConfigRequest)
Enables clients to request the configuration of the current ASR service, or a specific model within the service.
-
message RecognitionConfig
Provides information to the recognizer that specifies how to process the request
- nvidia.riva.AudioEncoding encoding
The encoding of the audio data sent in the request.
All encodings support only 1 channel (mono) audio.
-
int32 sample_rate_hertz
The sample rate in hertz (Hz) of the audio data sent in the RecognizeRequest or StreamingRecognizeRequest messages. The Riva server will automatically down-sample/up-sample the audio to match the ASR acoustic model sample rate. The sample rate value below 8kHz will not produce any meaningful output.
-
string language_code
Required. The language of the supplied audio as a [BCP-47](https://www.rfc-editor.org/rfc/bcp/bcp47.txt) language tag. Example: “en-US”.
-
int32 max_alternatives
Maximum number of recognition hypotheses to be returned. Specifically, the maximum number of SpeechRecognizeAlternative messages within each SpeechRecognizeResult. The server may return fewer than max_alternatives. If omitted, will return a maximum of one.
-
bool profanity_filter
A custom field that enables profanity filtering for the generated transcripts. If set to ‘true’, the server filters out profanities, replacing all but the initial character in each filtered word with asterisks. For example, “x**”. If set to false or omitted, profanities will not be filtered out. The default is false.
-
SpeechContext speech_contexts(repeated)
Array of SpeechContext. A means to provide context to assist the speech recognition. For more information, see SpeechContext section
-
int32 audio_channel_count
The number of channels in the input audio data. ONLY set this for MULTI-CHANNEL recognition. Valid values for LINEAR16 and FLAC are 1-8. Valid values for OGG_OPUS are ‘1’-‘254’. Valid value for MULAW, AMR, AMR_WB and SPEEX_WITH_HEADER_BYTE is only 1. If 0 or omitted, defaults to one channel (mono). Note: We only recognize the first channel by default. To perform independent recognition on each channel set enable_separate_recognition_per_channel to ‘true’.
-
bool enable_word_time_offsets
If true, the top result includes a list of words and the start and end time offsets (timestamps), and confidence scores for those words. If false, no word-level time offset information is returned. The default is false.
-
bool enable_automatic_punctuation
If ‘true’, adds punctuation to recognition result hypotheses. The default ‘false’ value does not add punctuation to result hypotheses.
-
bool enable_separate_recognition_per_channel
This needs to be set to true explicitly and audio_channel_count > 1 to get each channel recognized separately. The recognition result will contain a channel_tag field to state which channel that result belongs to. If this is not true, we will only recognize the first channel. The request is billed cumulatively for all channels recognized: audio_channel_count multiplied by the length of the audio.
-
string model
Which model to select for the given request. If empty, Riva will select the right model based on the other RecognitionConfig parameters. The model should correspond to the name passed to riva-build with the –name argument
-
bool verbatim_transcripts
The verbatim_transcripts flag enables or disable inverse text normalization. ‘true’ returns exactly what was said, with no denormalization. ‘false’ applies inverse text normalization, also this is the default
-
SpeakerDiarizationConfig diarization_config
Config to enable speaker diarization and set additional parameters. For non-streaming requests, the diarization results will be provided only in the top alternative of the FINAL SpeechRecognitionResult.
- RecognitionConfig.CustomConfigurationEntry custom_configuration (repeated)
Custom fields for passing request-level configuration options to plugins used in the model pipeline.
- message RecognitionConfig.CustomConfigurationEntry
-
string key
-
string value
-
string key
-
message RecognizeRequest
RecognizeRequest is used for batch processing of a single audio recording.
-
RecognitionConfig config
Provides information to recognizer that specifies how to process the request.
-
bytes audio
The raw audio data to be processed. The audio bytes must be encoded as specified in RecognitionConfig.
-
RecognitionConfig config
-
message RecognizeResponse
The only message returned to the client by the Recognize method. It contains the result as zero or more sequential SpeechRecognitionResult messages.
-
SpeechRecognitionResult results(repeated)
Sequential list of transcription results corresponding to sequential portions of audio. Currently only returns one transcript.
-
SpeechRecognitionResult results(repeated)
-
message RivaSpeechRecognitionConfigRequest
-
string model_name
If model is specified only return config for model, otherwise return all configs.
-
string model_name
-
message RivaSpeechRecognitionConfigResponse
- RivaSpeechRecognitionConfigResponse.Config model_config (repeated)
- message RivaSpeechRecognitionConfigResponse.Config
-
string model_name
- RivaSpeechRecognitionConfigResponse.Config.ParametersEntry parameters (repeated)
-
string model_name
- message RivaSpeechRecognitionConfigResponse.Config.ParametersEntry
-
string key
-
string value
-
string key
-
message SpeakerDiarizationConfig
Config to enable speaker diarization.
-
bool enable_speaker_diarization
If ‘true’, enables speaker detection for each recognized word in the top alternative of the recognition result using a speaker_tag provided in the WordInfo.
-
int32 max_speaker_count
Maximum number of speakers in the conversation. This gives flexibility by allowing the system to automatically determine the correct number of speakers. If not set, the default value is 8.
-
bool enable_speaker_diarization
-
message SpeechContext
Provides “hints” to the speech recognizer to favor specific words and phrases in the results.
-
string phrases(repeated)
A list of strings containing words and phrases “hints” so that the speech recognition is more likely to recognize them. This can be used to improve the accuracy for specific words and phrases, for example, if specific commands are typically spoken by the user. This can also be used to add additional words to the vocabulary of the recognizer.
-
float boost
Hint Boost. Positive value will increase the probability that a specific phrase will be recognized over other similar sounding phrases. The higher the boost, the higher the chance of false positive recognition as well. Though boost can accept a wide range of positive values, most use cases are best served with values between 0 and 20. We recommend using a binary search approach to finding the optimal value for your use case.
-
string phrases(repeated)
-
message SpeechRecognitionAlternative
Alternative hypotheses (a.k.a. n-best list).
-
string transcript
Transcript text representing the words that the user spoke.
-
float confidence
The confidence estimate. A higher number indicates an estimated greater likelihood that the recognized word is correct. This field is set only for a non-streaming result or, for a streaming result where is_final=true. This field is not guaranteed to be accurate and users should not rely on it to be always provided. Although confidence can currently be roughly interpreted as a natural-log probability, the estimate computation varies with difference configurations, and is subject to change. The default of 0.0 is a sentinel value indicating confidence was not set.
-
WordInfo words(repeated)
A list of word-specific information for each recognized word. Only populated if is_final=true
-
string transcript
-
message SpeechRecognitionResult
A speech recognition result corresponding to the latest transcript
-
SpeechRecognitionAlternative alternatives(repeated)
May contain one or more recognition hypotheses (up to the maximum specified in max_alternatives). These alternatives are ordered in terms of accuracy, with the top (first) alternative being the most probable, as ranked by the recognizer.
-
int32 channel_tag
For multi-channel audio, this is the channel number corresponding to the recognized result for the audio from that channel. For audio_channel_count = N, its output values can range from ‘1’ to ‘N’.
-
float audio_processed
Length of audio processed so far in seconds
-
SpeechRecognitionAlternative alternatives(repeated)
-
message StreamingRecognitionConfig
Provides information to the recognizer that specifies how to process the request
-
RecognitionConfig config
Provides information to the recognizer that specifies how to process the request
-
bool interim_results
If true, interim results (tentative hypotheses) may be returned as they become available (these interim results are indicated with the is_final=false flag). If false or omitted, only is_final=true result(s) are returned.
-
RecognitionConfig config
-
message StreamingRecognitionResult
A streaming speech recognition result corresponding to a portion of the audio that is currently being processed.
-
SpeechRecognitionAlternative alternatives(repeated)
May contain one or more recognition hypotheses (up to the maximum specified in max_alternatives). These alternatives are ordered in terms of accuracy, with the top (first) alternative being the most probable, as ranked by the recognizer.
-
bool is_final
If false, this StreamingRecognitionResult represents an interim result that may change. If true, this is the final time the speech service will return this particular StreamingRecognitionResult, the recognizer will not return any further hypotheses for this portion of the transcript and corresponding audio.
-
float stability
An estimate of the likelihood that the recognizer will not change its guess about this interim result. Values range from 0.0 (completely unstable) to 1.0 (completely stable). This field is only provided for interim results (is_final=false). The default of 0.0 is a sentinel value indicating stability was not set.
-
int32 channel_tag
For multi-channel audio, this is the channel number corresponding to the recognized result for the audio from that channel. For audio_channel_count = N, its output values can range from ‘1’ to ‘N’.
-
float audio_processed
Length of audio processed so far in seconds
-
SpeechRecognitionAlternative alternatives(repeated)
-
message StreamingRecognizeRequest
A StreamingRecognizeRequest is used to configure and stream audio content to the Riva ASR Service. The first message sent must include only a StreamingRecognitionConfig. Subsequent messages sent in the stream must contain only raw bytes of the audio to be recognized.
-
StreamingRecognitionConfig streaming_config
Provides information to the recognizer that specifies how to process the request. The first StreamingRecognizeRequest message must contain a streaming_config message.
-
bytes audio_content
The audio data to be recognized. Sequential chunks of audio data are sent in sequential StreamingRecognizeRequest messages. The first StreamingRecognizeRequest message must not contain audio data and all subsequent StreamingRecognizeRequest messages must contain audio data. The audio bytes must be encoded as specified in RecognitionConfig.
-
StreamingRecognitionConfig streaming_config
-
message StreamingRecognizeResponse
-
StreamingRecognitionResult results(repeated)
This repeated list contains the latest transcript(s) corresponding to audio currently being processed. Currently one result is returned, where each result can have multiple alternatives
-
StreamingRecognitionResult results(repeated)
-
message WordInfo
Word-specific information for recognized words.
-
int32 start_time
Time offset relative to the beginning of the audio in ms and corresponding to the start of the spoken word. This field is only set if enable_word_time_offsets=true and only in the top hypothesis.
-
int32 end_time
Time offset relative to the beginning of the audio in ms and corresponding to the end of the spoken word. This field is only set if enable_word_time_offsets=true and only in the top hypothesis.
-
string word
The word corresponding to this set of information.
-
float confidence
The confidence estimate. A higher number indicates an estimated greater likelihood that the recognized word is correct. This field is set only for a non-streaming result or, for a streaming result where is_final=true. This field is not guaranteed to be accurate and users should not rely on it to be always provided. Although confidence can currently be roughly interpreted as a natural-log probability, the estimate computation varies with difference configurations, and is subject to change. The default of 0.0 is a sentinel value indicating confidence was not set.
-
int32 speaker_tag
Output only. A distinct integer value is assigned for every speaker within the audio. This field specifies which one of those speakers was detected to have spoken this word. Value ranges from ‘1’ to diarization_speaker_count. speaker_tag is set if enable_speaker_diarization = ‘true’ and only in the top alternative.
-
int32 start_time