DGX-1 with Tesla V100

Version 20181107

The DGX-1 with Tesla V100 Firmware Update container version 20181107 is available.

  • Package name: nvidia-dgx-fw-0102-20181107.tar.gz
  • Image name: nvidia-dgx-fw-0102-20181107

Contents of the DGX-1 System Firmware Container

This container includes the firmware binaries and update utilities for the firmware listed in the following table.

Component Version
SBIOS S2W_3A06
VBIOS 88.00.18.00.01 (16 GB)

88.00.43.00.04 (32 GB)

Changes in this Release

  • Container
    • Removed BMC and PSU firmware updates due to potential issues with the update process.
  • System BIOS
    • Updated to version S2W_3A06

      Updated microcode to address Spectre vulnerability.

Version 20181010

The DGX-1 with Tesla V100 Firmware Update container version 20181010 is available.

  • Package name: nvidia-dgx-fw-0102-20181010.tar.gz
  • Image name: nvidia-dgx-fw-0102-20181010

Contents of the DGX-1 System Firmware Container

This container includes the firmware binaries and update utilities for the firmware listed in the following table.

Component Version
BMC 3.27.30
SBIOS S2W_3A06
PSU (Liteon) 00.03.07
SSD (Samsung) GXM1103Q
VBIOS 88.00.18.00.01 (16 GB)

88.00.43.00.04 (32 GB)

Changes in this Release

  • Container
    • Improved PSU firmware update robustness.
    • Added faulty PSU firmware detection capability to the show_version option, advising the user to reflash the firmware if needed. A forced reflash should then be performed.
  • BMC
    • Updated to version 3.27.30

      Added support for SNMPv3. Can be set from the BMC dashboard. Cannot be set using ipmitool.

  • System BIOS
    • Updated to version S2W_3A06

      Updated microcode to address Spectre vulnerability.

Known Issues

Recovery for PSU Update Failure

Issue

On rare occasions, the recovery mechanism in the container may not be able to recover from a failure in the PSU update process.

Action to Take

If the container does not recover, contact NVIDIA Enterprise Support for assistance.

SNMPv3 Traps are not Available for the BMC

Issue

The BMC is not capable of sending SNMPv3 traps at this time.

Workaround

From the BMC dashboard->SNMP Community Settings, enable traps for SNMPv2.