NVIDIA DOCA File Compression Application Guide

This document provides a file compression implementation on top of the NVIDIA® BlueField® DPU.

Introduction

The file compression application exhibits how to use the DOCA Compress API to compress and decompress data using hardware acceleration as well as sending and receiving it using the DOCA Comm Channel API.

The application's logic includes both a client and a server:

Client side – the application opens a file, compresses it, and sends the checksum of the source file with the compressed data to the server
Server side – the application saves the received file in a buffer, decompresses it, and compares the received checksum with the calculated one

System Design

The file compression application client runs on the host and the server runs on the DPU.

sys-design-version-1-modificationdate-1707420881760-api-v2.png

Application Architecture

The file compression application runs on top of the DOCA Comm Channel API to send and receive the file from the host and to the DPU.

app-arch-version-1-modificationdate-1707420882650-api-v2.png

Connection is established on both sides by DOCA Comm Channel API.
Client compresses the data:
- When compress engine is available – submits compress job with DOCA Compress API and sends the result to the server
- When compress engine is unavailable – compresses the data in software
Client sends the number of messages needed to send the compressed content of the file.
Client sends data segments in size of up to 4080 bytes.
Server saves the received data in a buffer and submits a decompress job.
Server sends an ACK message to the client when all parts of the file are received successfully.
Server compares the received checksum to the calculated checksum.
Server writes the decompressed data to an output file.

DOCA Libraries

This application leverages the following DOCA libraries:

Refer to their respective programming guide for more information.

Running the Application

Installation

Refer to the NVIDIA DOCA Installation Guide for Linux for details on how to install BlueField-related software.

Application Execution

The file compression application is provided in both source and binary forms. The binary is located under /opt/mellanox/doca/applications/file_compression/bin/doca_file_compression.

Application usage instructions:

Copy
Copied!

            
            Usage: doca_file_compression [DOCA Flags] [Program Flags]
 
DOCA Flags:
  -h, --help                        Print a help synopsis
  -v, --version                     Print program version information
  -l, --log-level                   Set the (numeric) log level for the program <10=DISABLE, 20=CRITICAL, 30=ERROR, 40=WARNING, 50=INFO, 60=DEBUG, 70=TRACE>
  --sdk-log-level                   Set the SDK (numeric) log level for the program <10=DISABLE, 20=CRITICAL, 30=ERROR, 40=WARNING, 50=INFO, 60=DEBUG, 70=TRACE>
  -j, --json <path>                 Parse all command flags from an input json file
 
Program Flags:
  -p, --pci-addr                    DOCA Comm Channel device PCI address
  -r, --rep-pci                     DOCA Comm Channel device representor PCI address
  -f, --file                        File to send by the client / File to write by the server
  -t, --timeout                     Application timeout for receiving file content messages, default is 5 sec

Note

This usage printout can be printed to the command line using th e -h (or --help) options:

Copy
Copied!

            
            /opt/mellanox/doca/applications/file_compression/bin/doca_file_compression -h

Note

For additional information, refer to section "Command Line Flags".

CLI example for running the application on BlueField:
Copy

Copied!
```
            
            /opt/mellanox/doca/applications/file_compression/bin/doca_file_compression -p 03:00.0 -r 3b:00.0 -f received.txt
        
```
Warning

Both the DOCA Comm Channel device PCIe address (03:00.0) and the DOCA Comm Channel device representor PCIe address (3b:00.0) should match the addresses of the desired PCIe devices.
CLI example for running the application on the host:
Copy

Copied!
```
            
            /opt/mellanox/doca/applications/file_compression/bin/doca_file_compression -p 3b:00.0 -f send.txt
        
```
Warning

The DOCA Comm Channel device PCIe address (3b:00.0) should match the address of the desired PCIe device.
The application also supports a JSON-based deployment mode, in which all command-line arguments are provided through a JSON file:
Copy

Copied!
```
            
            doca_file_compression --json [json_file]
        
```
For example:
Copy

Copied!
```
            
            cd /opt/mellanox/doca/applications/file_compression/bin
./doca_file_compression --json ./file_compression_params.json
        
```
Warning

Before execution, ensure that the used JSON file contains the correct configuration parameters, and especially the PCIe addresses necessary for the deployment.

Command Line Flags

Flag Type	Short Flag	Long Flag/JSON Key	Description	JSON Content
General flags	`h`	`help`	Prints a help synopsis	N/A
	`v`	`version`	Prints program version information	N/A
	`l`	`log-level`	Set the log level for the application: DISABLE=10 CRITICAL=20 ERROR=30 WARNING=40 INFO=50 DEBUG=60 TRACE=70 (requires compilation with `TRACE` log level support)	Copy Copied! `"log-level": 60`
	N/A	`sdk-log-level`	Sets the log level for the program: DISABLE=10 CRITICAL=20 ERROR=30 WARNING=40 INFO=50 DEBUG=60 TRACE=70	Copy Copied! `"sdk-log-level": 40`
	`j`	`json`	Parse all command flags from an input JSON file	N/A
Program flags	`f`	`file`	For client – path to the file to be sent For server – path to write the file into	Copy Copied! `"file": "/tmp/data.txt"`
	`p`	`pci-addr`	Comm Channel DOCA device PCIe address	Copy Copied! `"pci-addr": 03:00.1`
	`r`	`rep-pci`	Comm Channel DOCA device representor PCIe address	Copy Copied! `"rep-pci": b1:00.1`

Note

Refer to DOCA Arg Parser for more information regarding the supported flags and execution modes.

Troubleshooting

Refer to the NVIDIA DOCA Troubleshooting Guide for any issue encountered with the installation or execution of the DOCA applications.

Recompiling the Application

In addition to providing the application in binary form, the installation also includes all of the application sources and compilation instructions so as to allow modifying the sources and recompiling the application. For more information about the applications, as well as development and compilation tips, refer to the DOCA Applications page.

The sources of the application can be found under the /opt/mellanox/doca/applications/file_compression/src directory.

Recompiling All Applications

The applications are all defined under a single meson project, so the default compilation recompiles all the DOCA applications.

To build all the applications together, run:

Copy
Copied!

            
            cd /opt/mellanox/doca/applications/
meson /tmp/build 
ninja -C /tmp/build

Note

doca_file_compression is created under /tmp/build/file_compression/src/.

Recompiling File Compression Application Only

To directly build only the f ile compression application:

Copy
Copied!

            
            cd /opt/mellanox/doca/applications/
meson /tmp/build -Denable_all_applications=false -Denable_file_compression=true
ninja -C /tmp/build

Note

doca_file_compression is created under /tmp/build/file_compression/src/.

Alternatively, the user may set the desired flags in the meson_options.txt file instead of providing them in the compilation command line:

Edit the following flags in /opt/mellanox/doca/applications/meson_options.txt:
- Set enable_all_applications to false
- Set enable_file_compression to true

Run the following compilation commands :

Copy
Copied!

            
            cd /opt/mellanox/doca/applications/
meson /tmp/build 
ninja -C /tmp/build

Note

doca_file_compression is created under /tmp/build/file_compression/src/.

Troubleshooting

Refer to the NVIDIA DOCA Troubleshooting Guide for any issue encountered with the compilation of the application.

Application Code Flow

Parse application argument.

Initialize arg parser resources and register DOCA general parameters.

Copy
Copied!

            
            doca_argp_init();

Register file compression application parameters.

Copy
Copied!

            
            register_file_compression_params();

Parse the arguments.

Copy
Copied!

            
            doca_argp_start();

Parse app parameters.

Set endpoint attributes.
Copy

Copied!
```
            
            set_endpoint_properties();
        
```
1. Set maximum message size of 4080 bytes.
2. Set maximum number of messages allowed.

Create comm channel endpoint.

Copy
Copied!

            
            doca_comm_channel_ep_create();

Create endpoint for client/server.

Run client/server main logic.

Copy
Copied!

            
            file_compression_client/server();

Clean up the file compression application.

Copy
Copied!

            
            file_compression_cleanup();

Free all application resources.

Arg parser destroy.

Copy
Copied!

            
            doca_argp_destroy()

References

/opt/mellanox/doca/applications/file_compression/src
/opt/mellanox/doca/applications/file_compression/bin/file_compression_params.json

NVIDIA DOCA File Compression Application Guide

On This Page