NVIDIA Tegra
NVIDIA DRIVE OS 5.1 Linux SDK

Developer Guide
5.1.12.0 Release

 
MCU Device Types
On the DRIVE AGX Platform, the Safety MCU provided is the Infineon AURIX TC397X. There are two device types for AURIX, Step-A and Step-B, which are not software compatible. Consequently, a different binary for A step and B step must be used. The A-Step device is supported by Electrobit AUTOSAR firmware and NV IFW. However, B-Step is supported using NV IFW Version 1.30 or higher ONLY.
The differences between the two firmwares are as follows:
Feature
Supported by Electrobit Firmware Step A
Supported by IFW
Notes
Board power sequence
Yes
Yes
per hardware power sequence
Network switch configuration
Yes
Yes
NXP and Marvell switch configuration
Hyperion configuration
Yes
Yes
Supported with separate firmware for Step B device with IFW
CAN, Extended CAN, and CAN FD
Yes
Yes
Potentially not on par with Electrobit firmware
FlexRay
Yes
Yes
Potentially not on par with Electrobit firmware
Non-volatile memory configuration to store persistent data
Yes
No
 
NVCCP camera control
Yes
Yes
 
EasyCan RX/TX packets forwarded to the SoC over Ethernet
Yes
No
 
PTP with Aurix as master
Yes
No
 
Aurix firmware update
Yes
Yes
 
Thermal shutdown
Yes
Yes
 
Fan control SDL
Yes
No
 
Aurix Step B support
No
Yes
Step B is supported in IFW Version 1.3x