> For clean Markdown of any page, append .md to the page URL. > For a complete documentation index, see https://docs.nvidia.com/nemo/fabric/v0.7.0/getting-started/install/llms.txt. # Installation Overview > Choose a supported environment, deployment scenario, and package combination. Install the [NVIDIA NeMo Fabric](/nemo/fabric/about-nemo-fabric/overview) runtime and an adapter for your chosen harness. Some harnesses require a separate installation. For a guided first run, follow the [Quickstart](/nemo/fabric/getting-started/quickstart/overview). ## Requirements and Supported Platforms **Python 3.11–3.14.** Linux (x86_64, arm64), macOS (arm64), and Windows (x86_64). Hermes Agent v0.22.7 requires Python 3.14; OpenHands and Harbor require 3.12+. Check your [harness guide](/nemo/fabric/integrations/harness-integrations/overview) for additional requirements. Some harness adapters also require Node.js or Bun and separately installed SDKs or CLIs. Follow your harness-specific installation instructions for the required versions. Compare capabilities on [Supported Harnesses](/nemo/fabric/about-nemo-fabric/supported-harnesses); use [adapter installation](/nemo/fabric/getting-started/installation/adapters) for setup instructions. ## Deployment Scenarios | Scenario | What runs where | Installation route | | --------------------- | ----------------------------------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | | Shared environment | Runtime, adapter, and harness together | [Complete setup](/nemo/fabric/getting-started/installation/adapters#runtime-and-adapter-together) or [existing harness](/nemo/fabric/getting-started/installation/adapters#existing-harness-environment) | | Separate environments | Runtime launches the adapter environment's Python | [Adapter and harness](/nemo/fabric/getting-started/installation/adapters#separate-python-environments) | | Isolated task | Runtime, adapter, and harness in the task environment | [Harbor](/nemo/fabric/integrations/consumer-integrations/harbor) or [Environments](/nemo/fabric/sdk/environments-and-shared-services#explicit-environment-lifecycle) | ## Choose an Installation What each package installs. ✅ means the package installs the component; — means the package does not install it. Install the component separately if required. These are representative combinations; [adapter installation](/nemo/fabric/getting-started/installation/adapters) covers the available routes. | Installation | Runtime | Collector | Adapter | Harness | Relay Python | Relay CLI | | --------------------------------------------------------------------- | :-----: | :-------: | :-----: | :-----: | :----------: | :-------: | | `nemo-fabric` | ✅ | — | — | — | — | — | | `nemo-fabric[streaming]` | ✅ | ✅ | — | — | — | — | | `nemo-fabric[relay]` | ✅ | — | — | — | ✅ | — | | `nemo-fabric[hermes-agent]` | ✅ | — | ✅ | — | — | — | | `nemo-fabric[hermes-agent]` plus `nemo-fabric-adapters-hermes[relay]` | ✅ | — | ✅ | — | ✅ | — | | `nemo-fabric-adapters-claude[harness]` | — | — | ✅ | ✅ | — | ✅ | | `nemo-fabric-adapters-claude[full]` | — | — | ✅ | ✅ | — | ✅ | | `nemo-fabric-adapters-deepagents[full]` | — | — | ✅ | ✅ | ✅ | — | | `nemo-fabric-adapters-mini-swe-agent[full]` | — | — | ✅ | ✅ | ✅ | — | | `nemo-fabric-adapters-nooa[full]` | — | — | ✅ | ✅ | ✅ | — | | `nemo-fabric-adapters-openclaw` | — | — | ✅ | — | — | — | | `nemo-fabric-adapters-openhands` | — | — | ✅ | — | — | — | | `nemo-fabric-adapters-hermes[full]` | — | — | ✅ | — | ✅ | — | | `nemo-fabric-adapters-hermes[relay]` | — | — | ✅ | — | ✅ | — | | `nemo-fabric-adapters-claude` | — | — | ✅ | — | — | — | An adapter's `full` extra does not install the NeMo Fabric runtime; its contents vary by adapter. Hermes Agent must be installed separately. Refer to [Install a Harness Adapter](/nemo/fabric/getting-started/installation/adapters) for setup options and dedicated adapter guides. Use matching runtime and adapter releases unless another combination has been validated. For Hermes telemetry, use the adapter's `relay` extra. Hermes v0.22.7 uses Relay 0.11; v0.22.5 remains supported with Relay 0.10. ### Inspect Adapter Metadata Without Harness SDKs For the optional catalog package and descriptor lookup example, refer to [Inspect Adapter Metadata](/nemo/fabric/reference/adapter-metadata#inspect-adapter-metadata). ## Next Steps [Install the runtime](/nemo/fabric/getting-started/installation/fabric-runtime). [Install a harness adapter](/nemo/fabric/getting-started/installation/adapters). [NeMo Relay and streaming dependencies](/nemo/fabric/getting-started/install-relay). [Development setup and building from source](/nemo/fabric/contributing/setup). For package names, refer to [Packages and Distribution](/nemo/fabric/getting-started/artifacts). ## Docs - [Install the NeMo Fabric Runtime](https://docs.nvidia.com/nemo/fabric/v0.7.0/getting-started/installation/fabric-runtime.md): Install the runtime that coordinates harness execution, with an optional streaming collector. - [Install a Harness Adapter](https://docs.nvidia.com/nemo/fabric/v0.7.0/getting-started/installation/adapters.md): Install a ready-made NeMo Fabric adapter and the dependencies required by its harness. - [NeMo Relay and Streaming Dependencies](https://docs.nvidia.com/nemo/fabric/v0.7.0/getting-started/install-relay.md): Install the Relay integration and collector required by the chosen adapter.