> For clean Markdown of any page, append .md to the page URL. > For a complete documentation index, see https://docs.nvidia.com/nemoclaw/llms.txt. > For AI client integration (Claude Code, Cursor, etc.), connect to the MCP server at https://docs.nvidia.com/nemoclaw/_mcp/server. # Prerequisites > Hardware, software, and supported platforms for running NemoClaw. Before you start, verify that your machine has the software and hardware needed to run NemoClaw. ## Hardware | Resource | Minimum | Recommended | | -------- | ---------- | ----------- | | CPU | 4 vCPU | 4+ vCPU | | RAM | 8 GB | 16 GB | | Disk | 20 GB free | 40 GB free | The sandbox image is approximately 2.4 GB compressed. During image push, the Docker daemon, k3s, and the OpenShell gateway run alongside the export pipeline. The pipeline buffers decompressed layers in memory. On machines with less than 8 GB of RAM, this combined usage can trigger the OOM killer. If you cannot add memory, configure at least 8 GB of swap to work around the issue at the cost of slower performance. ## Software | Dependency | Version | | ---------- | ---------------------------------------------------------------------------------------- | | Node.js | 22.19 or later | | npm | 10 or later | | Python | Python 3 at a trusted system location, with POSIX descriptor-relative filesystem support | | Docker | Docker Engine, Docker Desktop, or Colima on a tested platform | | Platform | Refer to [Platforms](#platforms) below | On Linux, the installer checks Docker before it installs the NemoClaw CLI. The installer can install Docker, start the Docker service, and add your user to the `docker` group. When Docker is missing, the installer downloads Docker's official convenience script, prompts for `sudo`, and starts the service when systemd is available. In a non-interactive run, the installer can reactivate the group through `sg docker` and continue onboarding. If that path is unavailable or does not restore Docker access, the installer exits with `newgrp docker` guidance before it starts onboarding. NemoClaw uses an isolated `python3` helper for descriptor-relative migration snapshot sanitization and deletion. NemoClaw does not resolve this credential-bearing helper through the host `PATH`. It accepts a verified executable at `/usr/bin/python3`, `/usr/local/bin/python3`, `/opt/homebrew/bin/python3`, `/opt/local/bin/python3`, or beside the Node.js executable. The sanitizer fails closed before it reads snapshot content if no candidate passes its ownership, permission, and executable checks. Supported Linux, macOS, and WSL environments provide the required POSIX filesystem operations. Native Windows is not a supported execution path; use WSL. If you choose the native Linux Ollama install path, the onboard wizard also requires `zstd` for Ollama archive extraction. The installer also requires `strings` from `binutils` to verify the OpenShell binary before it continues with OpenShell install work. #### Docker Group Access NemoClaw needs Docker access. On personal Linux development machines, adding your user to the `docker` group is the standard way to run Docker without sudo. Members of the `docker` group can control the daemon with root-level impact. Grant this access only to trusted local accounts. On shared or managed systems, use your organization's approved Docker access path. For background, review Docker's [daemon attack surface guidance](https://docs.docker.com/engine/security/#docker-daemon-attack-surface). On Debian and Ubuntu, NemoClaw installs `zstd` with `apt-get` if it is missing; on other Linux distributions, install `zstd` before onboarding. If the installer reports that `strings` is missing, install `binutils` and rerun the installer: ```bash sudo apt-get install -y binutils ``` On macOS, NemoClaw uses the Docker-driver OpenShell gateway path with Docker Desktop or Colima. You do not need to install or sign a separate OpenShell VM driver helper for standard macOS onboarding. If you use Homebrew Colima, install the Docker CLI package with Colima because `brew install colima` does not provide the `docker` command: ```bash brew install colima docker colima start --cpu 4 --memory 8 docker info ``` #### OpenShell Lifecycle For NemoClaw-managed environments, use `nemohermes onboard` when you need to create or recreate the OpenShell gateway or sandbox. Avoid `openshell self-update`, `npm update -g openshell`, or `openshell sandbox create` directly unless you intend to manage OpenShell separately and then rerun `nemohermes onboard`. #### Docker Storage Driver On Linux hosts running Docker 26 or later with the [containerd image store](https://docs.docker.com/engine/storage/containerd/) enabled, `nemohermes onboard` transparently builds a `fuse-overlayfs`-enabled cluster image. The containerd image store is the install-time default for fresh `docker-ce` installations on Ubuntu 24.04 and similar distros. The `fuse-overlayfs`-enabled image bypasses a kernel-level nested-overlay limitation in k3s. You do not need manual setup. Refer to the [troubleshooting guide](../reference/troubleshooting) for the override knobs and a manual `daemon.json` alternative. ## Platforms The following table lists platforms with a documented installation path. A Tested with limitations row applies only to the configuration in its notes. The table comes from [`ci/platform-matrix.json`](https://github.com/NVIDIA/NemoClaw/blob/main/ci/platform-matrix.json), the single source of truth kept in sync by CI and QA. | OS | Container runtime | Status | Notes | | --------------------- | ---------------------------- | ----------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | | DGX OS (Spark) | Docker | Tested | Use the standard installer and `nemohermes onboard`. DGX Spark Express keeps automatic managed-vLLM serving-profile selection as option 1 and offers the fixed single-host catalog profile as option 2. The automatic two-DGX Spark managed-vLLM profile is Experimental, and physical two-node end-to-end validation is pending. For the profile requirements and controls, see [Set Up vLLM on Two DGX Sparks](../inference/local-inference/set-up-vllm-on-two-dgx-sparks). For the validated single-DGX Spark walkthrough with local inference, see the [NVIDIA Spark playbook](https://build.nvidia.com/spark/nemoclaw). | | DGX OS (Station) | Docker | Tested with limitations | Tested with limitations across qualified profiles on one physical DGX Station GB300; see [Additional Setup for DGX Station](additional-setup/dgx-station-preparation) for accepted profiles, the pending no-OTA DGX OS `7.6.x` end-to-end qualification, runtime gates, and current dual-Station and dedicated CI limitations. | | Linux | Docker | Tested | Primary tested path. Ubuntu 24.04 has host-level onboarding validation. A digest-pinned Ubuntu 26.04 userspace lane builds the CLI and runs preflight, installer, and platform contracts on eligible main pushes; Docker-host, AppArmor, Landlock, and live onboarding validation on 26.04 remain pending. Other distros (Ubuntu 22.04, Fedora, Rocky, Alma, NixOS, Arch) may work but are not validated. | | macOS (Apple Silicon) | Colima, Docker Desktop | Tested with limitations | Start the container runtime (Colima or Docker Desktop) before installing; NemoClaw verifies the pinned official OpenShell formula and grants formula-scoped trust only around each Homebrew install, inspection, start, or stop operation, requires a legacy or changed formula to be repaired by rerunning the pinned installer, uses the standalone gateway only when Homebrew is absent or both the staged formula and installed keg are absent, requires Homebrew Colima users to install both Colima and the Docker CLI (`brew install colima docker`) before `docker info` can work, and recommends Xcode Command Line Tools (`xcode-select --install`) for Node native modules. | | N1x FASTOS | Docker | Deferred | N1x Express remains Deferred until a physical NemoClaw Express E2E test passes. Host identity requires Linux `arm64`, a trusted `/etc/fastos-release` marker with `NAME="N1x FASTOS"`, and NVIDIA display PCI identity `10de:2e2a`. CUDA and Container Device Interface (CDI) readiness are still required. | | Windows WSL2 | Docker Desktop (WSL backend) | Tested with limitations | Requires WSL2 with Docker Desktop backend. See [Additional Setup for Windows Machines](additional-setup/windows-preparation) before the Quickstart. | For the complete platform support matrix, including all deferred platforms and CI coverage, refer to [Platform Support](../reference/platform-support). ## Additional Setup Most supported platforms require no additional setup beyond the hardware and software requirements above. Use only the page that matches your host. ### DGX Station Express Preparation If you are using a qualifying DGX Station GB300, follow [Prepare DGX Station to Install NemoClaw](additional-setup/dgx-station-preparation) before the Quickstart. ### Windows Preparation If you are using Windows, follow [Prepare a Windows Machine to Install NemoClaw](additional-setup/windows-preparation) before the Quickstart. ## Next Steps * [Quickstart](quickstart) installs NemoClaw and launches your first sandboxed agent. * [Use NemoClaw Docs with Your Coding Agents](../resources/agent-skills) lets your AI coding assistant fetch NemoClaw Markdown docs before setup.