> For clean Markdown of any page, append .md to the page URL. > For a complete documentation index, see https://docs.nvidia.com/nemoclaw/llms.txt. > For full documentation content, see https://docs.nvidia.com/nemoclaw/llms-full.txt. > For AI client integration (Claude Code, Cursor, etc.), connect to the MCP server at https://docs.nvidia.com/nemoclaw/_mcp/server. # Manage Sandbox Lifecycle > List sandboxes, check health, inspect logs, manage dashboard ports, reconfigure providers, rebuild safely, upgrade sandboxes, and uninstall NemoClaw. Use this guide after you finish the [OpenClaw quickstart](/get-started/quickstart). It covers day-two sandbox operations such as listing sandboxes, checking health, managing ports, rebuilding safely, upgrading, and uninstalling. When a workflow uses the lower-level OpenShell CLI, see [CLI Selection Guide](/reference/cli-selection-guide) for the boundary between `nemoclaw` and `openshell`. ## List Sandboxes List every sandbox registered on this host: ```console $ nemoclaw list ``` The list shows each sandbox's model, provider, policy presets, active SSH session indicator, and dashboard URL when a dashboard port is recorded. Use JSON output for scripts: ```console $ nemoclaw list --json ``` ## Check Sandbox Health Check a specific sandbox's health, inference route, active connections, live policy, update status, and messaging-channel overlap warnings: ```console $ nemoclaw my-assistant status ``` Use the host-level status command when you want the sandbox inventory plus host auxiliary service state, such as cloudflared: ```console $ nemoclaw status ``` ## Inspect Logs View recent sandbox logs: ```console $ nemoclaw my-assistant logs ``` Stream logs while you reproduce a problem: ```console $ nemoclaw my-assistant logs --follow ``` The log command reads both OpenClaw gateway output and OpenShell audit events, so policy denials appear beside gateway logs. ## Collect Diagnostics Collect diagnostics for bug reports or support handoff: ```console $ nemoclaw debug --sandbox my-assistant --output nemoclaw-debug.tar.gz ``` Use `--quick` for a smaller local summary: ```console $ nemoclaw debug --quick --sandbox my-assistant ``` The debug command gathers system information, Docker state, gateway logs, and sandbox status. ## Manage Dashboard Ports If the forward stopped, or the installer reported that no active forward was found and the URL does not load, restart it manually with the port from the install summary. ```console $ openshell forward start --background my-gpt-claw ``` To list active forwards across all sandboxes, run the following command. ```console $ openshell forward list ``` ## Run Multiple Sandboxes Each sandbox needs its own dashboard port, since `openshell forward` refuses to bind a port that another sandbox is already using. When the default port is already held by another sandbox, `nemoclaw onboard` scans ports `18789` through `18799` and uses the next free port. ```console $ nemoclaw onboard # first sandbox uses 18789 $ nemoclaw onboard # second sandbox uses the next free port, such as 18790 ``` To choose a specific port, pass `--control-ui-port`: ```console $ nemoclaw onboard --control-ui-port 19000 ``` You can also set `CHAT_UI_URL` or `NEMOCLAW_DASHBOARD_PORT` before onboarding: ```console $ CHAT_UI_URL=http://127.0.0.1:19000 nemoclaw onboard $ NEMOCLAW_DASHBOARD_PORT=19000 nemoclaw onboard ``` For full details on port conflicts and overrides, refer to [Port already in use](/reference/troubleshooting#port-already-in-use). ## Reconfigure or Recover Recover from a misconfigured sandbox without re-running the full onboard wizard or destroying workspace state. ### Change Inference Model or API Change the active model or provider at runtime without rebuilding the sandbox: ```console $ nemoclaw inference set --model --provider ``` Refer to [Switch Inference Providers](/inference/switch-inference-providers) for provider-specific model IDs and API compatibility notes. ### Restart the Gateway and Port Forward If `nemoclaw status` reports the sandbox is alive but the gateway is not running, run the recover command instead of opening a shell. ```console $ nemoclaw recover ``` The command restarts the in-sandbox gateway and re-establishes the dashboard port-forward in one step. It is idempotent and safe to script. Refer to [`nemoclaw recover`](/reference/commands#nemoclaw-name-recover) for details. ### Reset a Stored Credential If a provider credential was entered incorrectly during onboarding, clear the gateway-registered value and re-enter it on the next onboard run: ```console $ nemoclaw credentials list # see which providers are registered $ nemoclaw credentials reset # clear a single provider, for example nvidia-prod $ nemoclaw onboard # re-run to re-enter the cleared provider ``` The credentials command is documented in full at [`nemoclaw credentials reset `](/reference/commands#nemoclaw-credentials-reset-provider). ### Rebuild a Sandbox While Preserving Workspace State If you changed the underlying Dockerfile, upgraded OpenClaw, or want to pick up a new base image without losing your sandbox's workspace files, use `rebuild` instead of destroying and recreating: ```console $ nemoclaw rebuild ``` Rebuild preserves the mounted workspace and registered policies while recreating the container. If NemoClaw cannot archive any requested state path, it reports the backup failure and stops before deleting the original sandbox. Refer to [`nemoclaw rebuild`](/reference/commands#nemoclaw-name-rebuild) for flag details. ### Add a Network Preset After Onboarding Apply an additional preset, such as Telegram or GitHub, to a running sandbox without re-onboarding: ```console $ nemoclaw policy-add ``` Refer to [`nemoclaw policy-add`](/reference/commands#nemoclaw-name-policy-add) for usage details and flags. Non-interactive re-onboards in the default `suggested` policy mode preserve presets added this way. To make a re-onboard authoritative, set `NEMOCLAW_POLICY_MODE=custom` and provide `NEMOCLAW_POLICY_PRESETS` with the exact list to apply; onboarding removes anything else. See [`NEMOCLAW_POLICY_MODE`](/reference/commands#nemoclaw-onboard) for the full table. ## Update to the Latest Version When a new NemoClaw release becomes available, update the `nemoclaw` CLI on your host and check existing sandboxes for stale agent/runtime versions. ### Update the NemoClaw CLI Re-run the installer. Before it onboards anything, the installer calls [`nemoclaw backup-all`](/reference/commands#nemoclaw-backup-all) automatically, storing a snapshot of each running sandbox in `~/.nemoclaw/rebuild-backups/` as a safety net. If your existing gateway is from OpenShell earlier than `0.0.37`, the installer prompts before it runs the new automatic gateway upgrade path. The automatic path is offered only when the existing `nemoclaw` CLI supports `backup-all`; older installs must preserve sandbox state manually before retiring the gateway. For unattended installs, set `NEMOCLAW_ACCEPT_EXPERIMENTAL_OPENSHELL_UPGRADE=1`, or manually run `nemoclaw backup-all` and `openshell gateway destroy -g nemoclaw || openshell gateway destroy` before rerunning the installer as `curl -fsSL https://www.nvidia.com/nemoclaw.sh | NEMOCLAW_OPENSHELL_UPGRADE_PREPARED=1 bash`. ```console $ curl -fsSL https://www.nvidia.com/nemoclaw.sh | bash ``` ### Upgrade Sandboxes with Stale Agent and Runtime Versions The installer checks registered sandboxes after onboarding succeeds and runs `nemoclaw upgrade-sandboxes --auto` for stale running sandboxes. Use `upgrade-sandboxes` directly to verify the result, rebuild when you skipped the installer or onboarding step, or handle sandboxes that were stopped or could not be version-checked. The upgrade flow is non-destructive by default because NemoClaw preserves manifest-defined workspace state, but a manual snapshot before any major upgrade gives you a state restore point. ```console $ nemoclaw snapshot create --name pre-upgrade # optional, recommended $ nemoclaw update --yes # updates CLI through the maintained installer flow $ nemoclaw upgrade-sandboxes --check # verify or list remaining stale/unknown sandboxes $ nemoclaw upgrade-sandboxes # manually rebuild remaining stale running sandboxes ``` `nemoclaw update` is the CLI wrapper around the same installer path as `curl -fsSL https://www.nvidia.com/nemoclaw.sh | bash`. Use `nemoclaw update --check` when you only want to inspect version state and see the maintained update command. For scripted manual rebuilds, use `nemoclaw upgrade-sandboxes --auto` to skip the confirmation prompt. If the upgraded sandbox needs its workspace state reverted, restore the pre-upgrade snapshot into the running sandbox. This restores saved state directories only; it does not downgrade the sandbox image or agent/runtime: ```console $ nemoclaw snapshot restore pre-upgrade ``` ### What Changes During a Rebuild Each rebuild destroys the existing container and creates a new one. NemoClaw protects your data through the same backup-and-restore flow as [`nemoclaw rebuild`](/reference/commands#nemoclaw-name-rebuild): * NemoClaw preserves manifest-defined workspace state. Before deleting the old container, NemoClaw snapshots the state directories and durable state files defined in the agent manifest, typically `/sandbox/.openclaw/workspace/`; for Hermes this also includes `SOUL.md` and the SQLite database behind `.hermes/state.db`. Stored credentials (`~/.nemoclaw/credentials.json`) and registered policy presets live on the host and are re-applied to the new sandbox automatically. * NemoClaw does not preserve runtime changes outside the workspace state directories. This includes packages installed inside the running container with `apt` or `pip`, files in non-workspace paths, and in-memory or process state. If you have customized the running container at runtime, capture that as `Dockerfile` changes for `nemoclaw onboard --from` or a manual `openshell sandbox download` before the rebuild starts. Aborts before the destroy step are non-destructive. The flow refuses to proceed past preflight if a credential is missing or past backup if required manifest-defined state cannot be copied, so a failed run leaves the original sandbox intact and ready to retry. When a backup command reports partial archive output, NemoClaw keeps the usable entries and reports only the manifest-defined paths that could not be archived. See [Backup and Restore](/manage-sandboxes/backup-restore) for the full list of state-preservation guarantees, snapshot retention, and instructions for manual backups when the auto-flow is not enough. The rebuild preflight reads the provider credential recorded by your last `nemoclaw onboard` session. If you have switched providers since onboarding, for example from a remote API to a local Ollama setup, the preflight may still reference the old key and fail before any destroy step runs. To recover, re-run `nemoclaw onboard` and select your current provider. This refreshes the session metadata. Your existing container keeps serving traffic until the new image is ready. ## Uninstall To remove NemoClaw and all resources created during setup, run the CLI's built-in uninstall command: ```bash nemoclaw uninstall ``` | Flag | Effect | | ------------------ | ------------------------------------------ | | `--yes` | Skip the confirmation prompt. | | `--keep-openshell` | Leave OpenShell binaries installed. | | `--delete-models` | Also remove NemoClaw-pulled Ollama models. | `nemoclaw uninstall` runs the version-pinned `uninstall.sh` that shipped with your installed CLI, so it does not fetch anything over the network at uninstall time. If the `nemoclaw` CLI is missing or broken, fall back to the hosted script: ```bash curl -fsSL https://raw.githubusercontent.com/NVIDIA/NemoClaw/refs/heads/main/uninstall.sh | bash ``` For a full comparison of the two forms, including what they fetch, what they trust, and when to prefer each, see [`nemoclaw uninstall` vs. the hosted `uninstall.sh`](/reference/commands#nemoclaw-uninstall-vs-the-hosted-uninstallsh). ## Related Topics * [Set Up Messaging Channels](/manage-sandboxes/messaging-channels) to connect Telegram, Discord, or Slack. * [Workspace Files](/manage-sandboxes/workspace-files) for persistent OpenClaw files inside the sandbox. * [Backup and Restore](/manage-sandboxes/backup-restore) for snapshot and restore workflows. * [Monitor Sandbox Activity](/monitoring/monitor-sandbox-activity) for observability tools.