This documentation is for the extended support release (ESR) version of Cumulus Linux. We will continue to keep this content up to date until 21 February, 2023, when ESR support ends. For more information about ESR, please read this knowledge base article.

If you are using the current version of Cumulus Linux, the content on this page may not be up to date. The current version of the documentation is available here. If you are redirected to the main page of the user guide, then this page may have been renamed; please search for it there.

What's New

This document supports the Cumulus Linux 3.7 releases, and lists new platforms and features.

What’s New in Cumulus Linux 3.7.16

Cumulus Linux 3.7.16 contains bug fixes and security fixes.

What’s New in Cumulus Linux 3.7.15

Cumulus Linux 3.7.15 contains bug fixes and security fixes.

What’s New in Cumulus Linux 3.7.14.2

Cumulus Linux 3.7.14.2 contains bug fixes and security fixes.

What’s New in Cumulus Linux 3.7.14

Cumulus Linux 3.7.14 contains bug fixes and security fixes.

What’s New in Cumulus Linux 3.7.13

Cumulus Linux 3.7.13 contains bug fixes and security fixes.

What’s New in Cumulus Linux 3.7.12

Cumulus Linux 3.7.12 contains bug fixes.

Cumulus Linux 3.7.12 also includes a firmware update for Mellanox switches that addresses an issue with certain Virtium SSDs. The firmware update occurs automatically when you upgrade Cumulus Linux on a Mellanox switch and requires no user action.

What’s New in Cumulus Linux 3.7.11

Cumulus Linux 3.7.11 supports new platforms, provides bug fixes, and contains several new features and improvements.

New Platforms

  • Dell S5212F-ON (25G Trident3 X5)
  • Delta AG6248C PoE (1G Helix4)
  • HPE M-series SN2010M (25G Spectrum)
  • Lenovo NE2580O X7 (25G Trident3)
  • IBM 02JE062 (100G Spectrum)
  • Penguin Arctica NX4808xxv (25G Trident3)
  • Penguin Arctica NX3200c (100G Trident3 X7)

New Features and Enhancements

  • Custom ECMP on Mellanox switches and LAG hashing
  • DIP based multicast forwarding
  • LLDPD Dot1q support
  • Optimized ACL lookups on Mellanox switches for match combinations in ip6tables when VLAN subinterfaces are present
  • VRRP support on layer 3 interfaces and subinterfaces that are part of a VRF, and VRRP support with EVPN (without MLAG)
  • New NCLU commands include:
    • net show system ztp (shows details of Zero Touch Provisioning)
    • net show system leds (shows the current state of platform LEDs on the outside of the switch)
    • net show system sensors (shows the current status of Environmental sensors)
    • net show system asic (shows the current status of ASIC utilization data)
    • net show neighbor (shows the ARP/neighbor table)

What’s New in Cumulus Linux 3.7.10

Cumulus Linux 3.7.10 contains a critical bug fix.

What’s New in Cumulus Linux 3.7.9

Cumulus Linux 3.7.9 supports new platforms, provides bug fixes, and contains several new features and improvements.

New Platforms

  • Dell S5296F-ON (25G Trident 3)

New Features and Enhancements

What’s New in Cumulus Linux 3.7.8

Cumulus Linux 3.7.8 contains bug fixes and the following new transceivers.

  • Mellanox 100G-PSM4 (MMS1C10-CM)
  • Wave Splitter WST-QS28-CM4C-D (100G-CWDM4-OCP) and WST-QS28-CM4-C (100G CWDM4)

What’s New in Cumulus Linux 3.7.7

Cumulus Linux 3.7.7 contains bug fixes only.

What’s New in Cumulus Linux 3.7.6

Cumulus Linux 3.7.6 contains bug fixes, and the following new platform and power supply:

  • Dell N3048EP-ON (1G PoE Helix4) - Depending upon the revision of the switch you have, you might not be able to install Cumulus Linux on it. For more information, read this knowledge base article.
  • 48V DC PSU for the Dell Z9100-ON switch

What’s New in Cumulus Linux 3.7.5

Cumulus Linux 3.7.5 fixes an issue with EVPN centralized routing on Tomahawk and Tomahawk+ switches (CM-24495), an issue with switchd when IGMP snooping is enabled on a Broadcom switch (CM-24508) and includes additional security fixes.

Cumulus Linux 3.7.5 replaces Cumulus Linux 3.7.4.

New Platforms

  • FS.com N8500-48B6C (25G Tomahawk+)

New Features and Enhancements

What’s New in Cumulus Linux 3.7.4

Cumulus Linux 3.7.4 is no longer available due to issues that are resolved in Cumulus Linux 3.7.5.

What’s New in Cumulus Linux 3.7.3

Cumulus Linux 3.7.3 supports new platforms, provides bug fixes, and contains several new features and improvements.

New Platforms

  • Dell Z9264F-ON (100G Broadcom Tomahawk2)
  • Edgecore AS7816-64X (100G Broadcom Tomahawk2)
  • Edgecore AS7726-32X (100G Broadcom Trident3)
  • Edgecore AS7326-56X (25G Broadcom Trident3)
  • HPE SN2700M (100G Mellanox Spectrum)
  • HPE SN2100M (100G Mellanox Spectrum)
  • HPE SN2410M (25G Mellanox Spectrum)
  • Lenovo NE0152TO (1G Broadcom Helix4) now generally available
  • Penguin Arctica NX4804x (10G Broadcom Maverick)

New Features and Enhancements

What’s New in Cumulus Linux 3.7.2

Cumulus Linux 3.7.2 supports new platforms, provides bug fixes, and contains several new features and improvements.

New Platforms

  • Dell S5232F-ON (100G Trident3)
  • Delta AG9032v2 (100G Trident3)
  • Lenovo NE10032O (100G Tomahawk)
  • Lenovo NE2572O (25G Tomahawk+) - swp1 thru swp8 support 25G speed only
  • Lenovo NE0152TO (1G Helix4) - available for Early Access

New Features and Enhancements

What’s New in Cumulus Linux 3.7.1

Cumulus Linux 3.7.1 contains bug fixes only.

What’s New in Cumulus Linux 3.7.0

Cumulus Linux 3.7.0 supports new platforms, provides bug fixes, and contains several new features and improvements.

New Platforms

  • QCT QuantaMesh BMS T4048-IX8 (25G Trident3)
  • QCT QuantaMesh BMS T7032-IX7 (100G Trident3)
  • Dell S5248F-ON (25G Trident3)
  • Penguin Arctica 4806XT (10G Trident 2+)

New Features and Enhancements