If you are using the current version of Cumulus Linux, the content on this page may not be up to date. The current version of the documentation is available here. If you are redirected to the main page of the user guide, then this page may have been renamed; please search for it there.

Simple Network Management Protocol - SNMP

SNMP is an IETF standards-based network management architecture and protocol. Cumulus Linux uses the open source Net-SNMP agent snmpd version 5.8.1.pre1, which provides support for most of the common industry-wide MIBs, including interface counters and TCP/UDP IP stack data. The version in Cumulus Linux adds custom MIBs and pass-through and pass-persist scripts.

SNMP Components

The main components of SNMP in Cumulus Linux are:

  • SNMP network management system (NMS)
  • SNMP agents
  • The MIBs (management information bases)

SNMP Network Management System

An SNMP network management system (NMS) is a system configured to poll SNMP agents (such as Cumulus Linux switches or routers) that can send query requests to SNMP agents with the correct credentials. The managers poll the agents and the agents respond with the data. There are a variety of command line tools for polling, including snmpget, snmpgetnext, snmpwalk, snmpbulkget, and snmpbulkwalk. SNMP agents can also send unsolicited traps and inform messages to the NMS based on predefined criteria, like link changes.

SNMP Agent

The SNMP agent (the snmpd daemon) running on a Cumulus Linux switch gathers information about the local system and stores the data in a management information base, or MIB. Parts of the MIB tree are available and provided to incoming requests originating from an NMS host that has authenticated with the correct credentials. You can configure the Cumulus Linux switch with usernames and credentials to provide authenticated and encrypted responses to NMS requests. The snmpd agent can also proxy requests and act as a master agent to sub-agents running on other daemons, like for FRR or LLDP.

Management Information Base (MIB)

The MIB is a database for the snmpd daemon that runs on the agent. MIBs adhere to IETF standards but are flexible enough to allow vendor-specific additions. Cumulus Linux includes custom enterprise MIB tables in a set of text files on the switch; the files are in /usr/share/snmp/mibs/ and their names all start with Cumulus. They include:

  • Cumulus-Counters-MIB.txt
  • Cumulus-POE-MIB.txt
  • Cumulus-Resource-Query-MIB.txt
  • Cumulus-Snmp-MIB.txt

The MIB is a top-down hierarchical tree. Each branch that forks off has both an identifying number (starting with 1) and an identifying string that is unique for that level of the hierarchy. You can use the strings and numbers interchangeably. The parent IDs (numbers or strings) combine, starting with the most general to form an address for the MIB object. A dot in this notation represents each junction in the hierarchy so that the address is a series of ID strings or numbers separated by dots. This entire address is an object identifier (OID).

You can use various online and command line tools to translate between numbers and strings and to also provide definitions for the various MIB objects. For example, you can view the sysLocation object (in SNMPv2-MIB.txt) in the system table as either a series of numbers or as the string iso.org.dod.internet.mgmt.mib-2.system.sysLocation. You view the definition with the snmptranslate command, which is part of the snmp Debian package in Cumulus Linux.

cumulus@switch:~$ snmptranslate -Td -On SNMPv2-MIB::sysLocation
sysLocation OBJECT-TYPE
  -- FROM       SNMPv2-MIB
  SYNTAX        OCTET STRING (0..255)
  DISPLAY-HINT  "255a"
  MAX-ACCESS    read-write
  STATUS        current
  DESCRIPTION   "The physical location of this node (e.g., 'telephone
            closet, 3rd floor').  If the location is unknown, the
            value is the zero-length string."
::= { iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) system(1) 6 }

In the last line above, the section or iso.org.dod.internet is the OID that defines internet resources. The 2 or mgmt that follows is for a management subcategory. The 1 or mib-2 under that defines the MIB-2 specification. The 1 or system is the parent for child objects sysDescr, sysObjectID, sysUpTime, sysContact, sysName, sysLocation, sysServices, and so on, as you see in the tree output from the second snmptranslate command below, where sysLocation is 6.

cumulus@leaf01:mgmt:~$ snmptranslate -Tp -IR system
   +-- -R-- String    sysDescr(1)
   |        Textual Convention: DisplayString
   |        Size: 0..255
   +-- -R-- ObjID     sysObjectID(2)
   +-- -R-- TimeTicks sysUpTime(3)
   |  |
   |  +--sysUpTimeInstance(0)
   +-- -RW- String    sysContact(4)
   |        Textual Convention: DisplayString
   |        Size: 0..255
   +-- -RW- String    sysName(5)
   |        Textual Convention: DisplayString
   |        Size: 0..255
   +-- -RW- String    sysLocation(6)
   |        Textual Convention: DisplayString
   |        Size: 0..255
   +-- -R-- INTEGER   sysServices(7)
   |        Range: 0..127
   +-- -R-- TimeTicks sysORLastChange(8)
   |        Textual Convention: TimeStamp
         |  Index: sysORIndex
         +-- ---- INTEGER   sysORIndex(1)
         |        Range: 1..2147483647
         +-- -R-- ObjID     sysORID(2)
         +-- -R-- String    sysORDescr(3)
         |        Textual Convention: DisplayString
         |        Size: 0..255
         +-- -R-- TimeTicks sysORUpTime(4)
                  Textual Convention: TimeStamp