switchd Log Message Reference

The following table lists the log messages generated by switchd, organized by severity, then message text. These messages appear in /var/log/switchd.log.

SeverityMessage TextExplanationRecommended Action
CRITICAL_port_group_config_values_get: hal_list_get failed on [str]List create failed.File a ticket with Cumulus Support.
CRITICAL_range_limits_get: start linux interface name buffer is NULLInvalid parameter.File a ticket with Cumulus Support.
CRITICAL_range_limits_get: end linux interface name buffer is NULLInvalid parameter.File a ticket with Cumulus Support.
CRITICAL_range_limits_get: [str]-[str] not recognizedInvalid port set configuration.Check QoS configuration file.
CRITICAL_range_limits_get: port range [str] not recognizedInvalid port set configuration.Check QoS configuration file.
CRITICAL_port_group_ports_set: hal_list_get failed on [str]Port set list create failed.Check QoS configuration file.
CRITICAL_port_group_name_list_get: hal_list_get failed on [str]List create failed.Check QoS configuration file.
CRITICAL_port_group_range_translate: _get_range_limits failed on [str]Invalid port set configuration.Check QoS configuration file.
CRITICAL_priority_group_config_get: hal_list_get failed on [str]Configuration list create failed.File a ticket with Cumulus Support.
CRITICALhal_list_get: list string [str] contains more elements than the maximum allowed ([int])List capacity exceeded.File a ticket with Cumulus Support.
CRITICALhal_sh_datapath_file_read: could not load config file [str]Could not load the back end QoS configuration file.Check backend QoS configuration file.
CRITICALUnable to reallocate [int] bytes of memoryMemory allocation failed.File a ticket with Cumulus Support.
CRITICALNo backends found.No back ends found.File a ticket with Cumulus Support.
CRITICALLicense: email is longer than [int] charactersEmail length exceeds maximum.Modify email address.
CRITICALLicense: license data is longer than [int]License data exceeds maximum.Check license.
CRITICALLicense: Invalid formatInvalid license format.Check license.
CRITICALNo license file.No license file found.Check license file.
CRITICALThe Cumulus Linux license appears to be invalid.
This WILL NOT affect your system operations at the moment. Future versions will enforce fully valid licenses on the system.
Please contact licensing@cumulusnetworks.com at your convenience so we can validate and assist you with this licensing issue.
Invalid license.Check license.
CRITICALNo license file.No license file found.Check license file.
CRITICALIncomplete license.Incomplete license.Check license.
CRITICALLicense is expired!License is expired.Renew license.
CRITICALunable to get tap_name for port [uint]Port config failed: no port name.File a ticket with Cumulus Support.
CRITICALVoluntary restart by timestamp check requestedVoluntary switchd restart.None.
CRITICALCouldn’t write ready file [str]Could not mark switchd startup complete.File a ticket with Cumulus Support.
CRITICALCould not open [str] to record error typeCould not report restart reason.File a ticket with Cumulus Support.
CRITICALError setting signal handlers.Signal handler initialization failed.File a ticket with Cumulus Support.
CRITICALNo license to run switchd!No switchd license is installed.Install switchd license.
CRITICALdaemon call failed with rv [int]switchd could not be daemonized.File a ticket with Cumulus Support.
CRITICALCouldn’t write pid file [str]Could not write out the process ID.File a ticket with Cumulus Support.
CRITICALSwitchd fs init failed.Failed to initialize the switchd file system.File a ticket with Cumulus Support.
CRITICALSwitchd config failed.Could not load the switchd configuration file.Check switchd configuration file.
CRITICALNetlink init failed.Netlink initialization failed.File a ticket with Cumulus Support.
CRITICALHAL init failed.HAL initialization failed.File a ticket with Cumulus Support.
CRITICALNIC init failed.NC initialization failed.File a ticket with Cumulus Support.
CRITICALPort init failed.Port initialization failed.File a ticket with Cumulus Support.
CRITICALBridges init failed.Bridges initialization failed.File a ticket with Cumulus Support.
CRITICALBonds init failed.Bonds initialization failed.File a ticket with Cumulus Support.
CRITICALLogical networks init failed.Logical networks initialization failed.File a ticket with Cumulus Support.
CRITICALInterface list init failed.Interface list initialization failed.File a ticket with Cumulus Support.
CRITICALSwitchd fs mount failed.Could not mount switchd file system.File a ticket with Cumulus Support.
CRITICALFailed to add route [str]Failure in VRF route leak feature. This message notifies that a route entry could not be properly added to one of the software tables.File a ticket with Cumulus Support.
CRITICALMAC address [str] couldn’t be added to or retrieved from hashRelates to merging MAC tables. The message notifies that an entry expected in a MAC address software table is not found therein.This should never be seen. File a ticket with Cumulus Support.
CRITICALFailed to add route [str]Add MPLS transit LSP to a software table failed.File a ticket with Cumulus Support.
CRITICAL[str]: hal port list malloc failedMemory exhausted.File a ticket with Cumulus Support.
CRITICALFailed to add [str] to [str]“Failed to add to ”. Issue happens when addition of the port to a software table fails.File a ticket with Cumulus Support.
CRITICALFailed to add hal mroute for [str]Failed to add multicast route to a software table.File a ticket with Cumulus Support.
CRITICALFailed to add [str] to [str]“Failed to add to ”. Issue happens when addition of the port to a software table fails.File a ticket with Cumulus Support.
CRITICALFailed to add grp [str] to mrouteA multicast route for a group could not be added to a software hash table.File a ticket with Cumulus Support.
CRITICALMaximum number of bonds exceeded, max is [int]Maximum number of bonds exceeded.Reduce the number of bonds on the switch.
CRITICALMaximum number of slaves per bond exceeded, max is [int]Maximum number of bond members per bond exceeded.Reduce the number of bond members configured for a bond.
CRITICALrtnl slave state get failed for bond:[int] port: [int]Could not get the bond member state from Netlink.File a ticket with Cumulus Support.
CRITICALFailed to add route [str]Failed to add route to a software table.File a ticket with Cumulus Support.
CRITICALFailed to add [str] to bridge [int]Failed to add a port to the bridge.File a ticket with Cumulus Support.
CRITICALFailed to add [str] to grp [str]Failed to add a port to the MDB group.File a ticket with Cumulus Support.
CRITICALFailed to add [str] to bridge [int]Failed to add an MDB group to the bridge.File a ticket with Cumulus Support.
CRITICALFailed to add bridge [int] to mdbFailed to add a given bridge to MDB.File a ticket with Cumulus Support.
CRITICALFailed to add port [str] in grp [str], bridge [int]Failed to add a port to a group for the specific bridge.File a ticket with Cumulus Support.
CRITICALFailed to add [str] to bridge [int]Failed to add a port to the bridge.File a ticket with Cumulus Support.
CRITICALFailed to add port [str] in grp [str]Failed to add a port to the MDB group.File a ticket with Cumulus Support.
CRITICALFailed to add [str] to bridge [int]Failed to add a port to the bridge.File a ticket with Cumulus Support.
CRITICALFailed to add bridge [str] to mdbFailed to add a given bridge to MDB.File a ticket with Cumulus Support.
CRITICALFailed to add [str] to bridge [int]Failed to add a port to the bridge.File a ticket with Cumulus Support.
CRITICALarptables: Memory allocation for rules failed,malloc: [str]ACL out of memory resource.File a ticket with Cumulus Support.
CRITICALFailed to create kernel bridgeL2: Bridge hash table add failed.File a ticket with Cumulus Support.
CRITICALOpen of /dev/net/tun failed: [str]Failed to create a net device.File a ticket with Cumulus Support.
CRITICALTUNSETIFF failed: [str]Failed to create a net device.File a ticket with Cumulus Support.
CRITICALSIOCGIFHWADDR failed: [str]Failed to create a net device.File a ticket with Cumulus Support.
CRITICALSIOCSIFHWADDR failed: [str]Failed to create a net device.File a ticket with Cumulus Support.
CRITICALTUNSETPERSIST failed: [str]Failed to create a net device.File a ticket with Cumulus Support.
CRITICALTUNSETOFFLOAD failed: [str]Failed to create a net device.File a ticket with Cumulus Support.
CRITICALCouldn’t create tuntap ioctl socket.Failed to create a net device.File a ticket with Cumulus Support.
CRITICALCouldn’t get netdev flags.Failed to create a net device.File a ticket with Cumulus Support.
CRITICALCouldn’t Set netdev flags.Failed to create a net device.File a ticket with Cumulus Support.
CRITICAL[str]: rtnl_link_alloc failed for family [int]Failed to create filters.File a ticket with Cumulus Support.
CRITICAL[str]: rtnl_neigh_alloc failed for family [int]Failed to create filters.File a ticket with Cumulus Support.
CRITICALFailed to blacklist interface [int]Failed to block interfaces.Check block interfaces.
CRITICALF ailed to blacklist interface [int]Failed to block interfaces.Check block interfaces.
CRITICALFailed to add [str], ifindex [int] to sw_intfsFailed to create interfaces.Recreate the interface.
CRITICALFailed to delete ifindex [int] from sw_intfsFailed to create interfaces.Recreate the interface.
CRITICAL[str]: could not load interface configSyncing database failed between kernel and switchd.File a ticket with Cumulus Support.
CRITICALbogus filesystem path: [str]Failed to add a file in SFS (simple file system).File a ticket with Cumulus Support.
CRITICALNeed file specFailed to add a file in SFS (simple file system).File a ticket with Cumulus Support.
CRITICALcan’t replace existing directory with file: [str]Failed to add a file in SFS (simple file system).File a ticket with Cumulus Support.
CRITICALfilesystem already initializedFailed to initialize in SFS (simple file system).File a ticket with Cumulus Support.
CRITICALfilesystem hash table alloc failedFailed to allocate hash table in SFS init.File a ticket with Cumulus Support.
CRITICALfilesystem mount failedFailed to mount SFS in swtichd init.File a ticket with Cumulus Support.
CRITICALfilesystem new failedFailed to mount SFS in swtichd init.File a ticket with Cumulus Support.
CRITICALbogus filesystem path: [str]Failed to delete filesystem in SFS.File a ticket with Cumulus Support.
CRITICALpthread_create failed: [str]Failed to create a thread in NIC init.File a ticket with Cumulus Support.
CRITICALpthread_detach failed: [str]Failed to detach a thread in NIC init.File a ticket with Cumulus Support.
CRITICALTX Ring allocation failed: [str]Failed to alloc packt buffer in NIC init.File a ticket with Cumulus Support.
CRITICALCouldn’t increase netlink rbuf size: [str]Failed to init buffer size in Netlink socket.File a ticket with Cumulus Support.
CRITICALCouldn’t increase netlink wbuf size: [str]Failed to init buffer size in Netlink socket.File a ticket with Cumulus Support.
CRITICALCouldn’t allocate netlink socket.Failed to create a Netlink socket.File a ticket with Cumulus Support.
CRITICALCouldn’t connect netlink socket: [str]Failed to create a Netlink socket.File a ticket with Cumulus Support.
CRITICALnl_resync_route failed for cache [int]: [str]Failied to create a resync router function in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t set bufsize for manager netlink socket.Failied to reinitialize buffer size in Netlink socket.File a ticket with Cumulus Support.
CRITICALinvalid cache mngrinfo.Failied to create a resync in Netlink idle callback.File a ticket with Cumulus Support.
CRITICAL[str]: failed to close socket: [str]Failed to configure FD in Netlink socket.File a ticket with Cumulus Support.
CRITICAL[str]: nl_cache_mngr_data_ready failed: [str]Failed to configure FD in Netlink socket.File a ticket with Cumulus Support.
CRITICALCouldn’t allocate netlink socket.Failed to create a socket in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t allocate netlink socket.Failed to create a socket in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t allocate manager netlink socket.Failed to create a socket in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t create cache manager: [str]Failed to allocate a cache in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t set bufsize for manager netlink socket.Failed to allocate a cache in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t add link cache: [str]Failed to allocate a cache in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t add link cache: [str]Failed to allocate a cache in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t add route cache: [str]Failed to allocate a cache in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t add mdb cache: [str]Failed to allocate a cache in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t alloc neigh cache: [str]Failed to allocate a cache in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t add mroute cache: [str]Failed to allocate a cache in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t alloc tcqdisc cache: [str]Failed to allocate a cache in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t add tcqdisc cache: [str]Failed to allocate a cache in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t alloc tcclass cache: [str]Failed to allocate a cache in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t add tcclass cache: [str]Failed to allocate a cache in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t alloc tccls cache: [str]Failed to allocate a cache in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t add tccls cache: [str]Failed to allocate a cache in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t alloc tcact cache: [str]Failed to allocate a cache in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t add tcact cache: [str]Failed to allocate a cache in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t alloc rule cache: [str]Failed to allocate a cache in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t add rule cache: [str]Failed to allocate a cache in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t add neigh cache: [str]Failed to allocate a cache in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t alloc netconf cache: [str]Failed to allocate a cache in Netlink init.File a ticket with Cumulus Support.
CRITICALCouldn’t initialize genl/port interfaceFailed to initialize port interface in Netlink init.File a ticket with Cumulus Support.
CRITICALFailed to create kernel bridgeFailed to allocate a hash entry in bridge sync.File a ticket with Cumulus Support.
CRITICALPort msg [str] failure: err [int]Failed to configure PORT FEC parameter.File a ticket with Cumulus Support.
CRITICALPort msg [str] reply failure: err [int]Failed to configure PORT FEC parameter.File a ticket with Cumulus Support.
CRITICALFailed run recvmsg_default on port socket, err [int], [str]Failed to initialize PORT receiving messages.File a ticket with Cumulus Support.
CRITICALvlan stats send failure: err [int]Failed to configure status in VLAN.File a ticket with Cumulus Support.
CRITICALmroute hitbits send failure: err [int]Failed to configure hit bit status in MCAST router.File a ticket with Cumulus Support.
CRITICALPort send stats failure: err [int]Failed to configure status in PORT.File a ticket with Cumulus Support.
CRITICALPort send settings failure: err [int]Failed to configure settings in PORT.File a ticket with Cumulus Support.
CRITICALPort send carrier failure: err [int]Failed to configure carrier in PORT.File a ticket with Cumulus Support.
CRITICALifindex [int] already registered for port opsFailed to register interface options in PORT.File a ticket with Cumulus Support.
CRITICALifindex [int] not registered for port opsFailed to unregister interface options in PORT.File a ticket with Cumulus Support.
CRITICALFailed to allocate port hash tableFailed to initialize PORT.File a ticket with Cumulus Support.
CRITICALFailed to allocate port socketFailed to initialize PORT.File a ticket with Cumulus Support.
CRITICALFailed to genl connect to port socketFailed to initialize PORT.File a ticket with Cumulus Support.
CRITICALFailed to allocate port sync socketFailed to initialize PORT.File a ticket with Cumulus Support.
CRITICALFailed to genl connect to port socketFailed to initialize PORT.File a ticket with Cumulus Support.
CRITICALFailed to set genl port sync socket to non-blockingFailed to initialize PORT.File a ticket with Cumulus Support.
CRITICALFailed to resolve port ops, err [int]Failed to initialize PORT.File a ticket with Cumulus Support.
CRITICALFailed to resolve port multicast groupFailed to initialize PORT.File a ticket with Cumulus Support.
CRITICALFailed to register port ops, err [int]Failed to initialize PORT.File a ticket with Cumulus Support.
CRITICALFailed to add port group membership, err [int]Failed to initialize PORT.File a ticket with Cumulus Support.
CRITICALFailed to modify port socket notify cb, err [int]Failed to initialize PORT.File a ticket with Cumulus Support.
CRITICAL[str]:[int]: [str][str]Assertion [str] failedFailed to find the function name in switchd.File a ticket with Cumulus Support.
ERRORpriority group [int] headroom count [int] exceeds the maximum value [int]P ort headroom buffers exceed ASIC limit.File a ticket with Cumulus Support.
ERRORshared buffer type [int] not recognizedInvalid buffer type.File a ticket with Cumulus Support.
ERRORsx_api_cos_prio_to_ieeeprio_set failed: [str]IEEE priority map configuration write failed.File a ticket with Cumulus Support.
ERROR_hal_mlx_packet_2_switch: priority field [int] not supportedPacket priority field not supported for source.Check QoS configuration file.
ERRORpriority field [int] not supportedP acket priority field not supported for remark.Check QoS configuration file.
ERRORcos list length [int] is longer than maximum value [int]ECN/RED configuration: list is too long.Check QoS configuration file.
ERRORhash params get failed: [str]ASIC ECMP hash seed configuration read failed.File a ticket with Cumulus Support.
ERRORhash params set failed: [str]ASIC ECMP hash seed configuration write failed.File a ticket with Cumulus Support.
ERRORhal_sh_datapath_pfc_set: PFC configuration not supported on the CPU portCPU port does not support priority flow control.File a ticket with Cumulus Support.
ERRORhal_sh_datapath_init: datapath init failed: rv [int]: [str]Back end QoS initialization failed.Check for detailed log messages.
ERROR_priority_field_list_get: Packet priority field [str] not supportedInvalid packet priority field.Check QoS configuration file.
ERROR_sfs_init: could not load traffic config file [str]Traffic configuration file missing or is unreadable.Check QoS configuration file.
ERROR_sfs_port_init: could not load traffic config file [str]Traffic configuration file missing or is unreadable.Check QoS configuration file.
ERROR_add_port_group: port group [str] exceeds max port group count [int]Too many port groups configured.Check QoS configuration file.
ERROR_add_port_group: memory allocation failed for port group [str]Memory allocation failed.File a ticket with Cumulus Support.
ERROR_switch_priority_config: [str]ASIC scheduler configuration failed.File a ticket with Cumulus Support.
ERROR_priority_map_config map function, hal port [int]: [str]ASIC priority map configuration failed.File a ticket with Cumulus Support.
ERROR_priority_map_config enable function: [str]ASIC priority map enable configuration failed.File a ticket with Cumulus Support.
ERROR_port_group_range_translate: invalid port list: range length is 0, id list is 0Invalid port set configuration.Check QoS configuration file.
ERROR_port_group_range_translate: failed: port list not created from range [str] to [str]Invalid port set configuration.Check QoS configuration file.
ERRORhal_datapath_init: priority field initialization expects 3 three priority fields, got [int]Invalid inputs.File a ticket with Cumulus Support.
ERRORhal_datapath_init: priority map direction initialization expects two priority map directions, got [int]Invalid inputs.File a ticket with Cumulus Support.
ERRORhal_datapath_init: DOS config failed: [str]ASIC DoS config failed.File a ticket with Cumulus Support.
ERROR_cutthrough_config: Cutthrough config failed on HAL port [int]: [str]ASIC cut-through configuration failed.File a ticket with Cumulus Support.
ERROR_source_priority_map_init: packet priority map size [int] is larger than array length [int]Configured priority map list is too large.Check QoS configuration file.
ERROR_source_priority_map_populate: packet priority map entry index [int] is larger than array length [int]Configured priority map list is too large.Check QoS configuration file.
ERROR_remark_priority_map_init: packet priority map entry index [int] is larger than array length [int]Configured priority map list is too large.Check QoS configuration file.
ERROR_remark_priority_map_populate: packet priority map entry index [int] is larger than array length [int]Configured priority map list is too large.Check QoS configuration file.
ERROR_priority_map_get: field index [int] is out of bounds: [int] available field entriesInvalid packet priority field.Check QoS configuration file.
ERROR_priority_map_get: cos ID [int] is out of bounds: [int] cos ID valuesInvalid priority value.Check QoS configuration file.
ERROR_priority_map_get: old syntax flag [int] should be less than [int]Invalid configuration syntax.File a ticket with Cumulus Support.
ERRORhal_list_get: strdup returned NULLMemory allocation failed.File a ticket with Cumulus Support.
ERRORhal_port_pause_set: RX pause not allowed on port [int]Invalid operation for the current port configuration.Check QoS configuration file.
ERRORvlan_range_confi: incorrect format, revert to defaultInvalid configuration.Correct configured VLAN range.
ERRORvlan_range_confi: incorrect format, revert to defaultInvalid configuration.Correct configured VLAN range.
ERRORvlan_range_confi: incorrect range, revert to defaultInvalid configuration.Correct configured VLAN range.
ERRORvlan_range_confi: minimum range is [int], revert to defaultInvalid configuration.Correct configured VLAN range.
ERRORbackend_enum_info_key unsupported type [uint]Invalid backend type.File a ticket with Cumulus Support.
ERRORhal_init [str] enum_fn [str]: dlerror [str]No back end enum function found.File a ticket with Cumulus Support.
ERRORhal_init failed to open [str]: [str]Could not open the back end DLL.File a ticket with Cumulus Support.
ERRORhal_init unsupported type [uint]Invalid back end type.File a ticket with Cumulus Support.
ERRORhal_init: backend function at offset [int] non populated: [address]Back end function pointer is not set.File a ticket with Cumulus Support.
ERRORUnable to setup handling of SIGHUP for log rotation: [str]Signal handler initiailzation failed.File a ticket with Cumulus Support.
ERRORCouldn’t delete pid file [str], [str]Could not delete process ID file.File a ticket with Cumulus Support.
ERRORFailed to update VRF [str] to table id [uint]
ERRORFailed to add VRF [str] with table id [uint]
ERRORFailed to get VRF table id for index [int]VRF table ID not found for the master link.File a ticket with Cumulus Support.
ERROR[int] hosts were ignored due to capacity.Kernel neighbors did not fit in the hardware table.Modify neighbor configuration.
ERROR[int] routes were ignored due to total capacity.Kernel routes did not fit in the hardware table.Modify route configuration.
ERROR[int] [str] routes were ignored due to capacity.Kernel routes did not fit in the hardware table.Modify route configuration.
ERRORIgnoring VRF [str]; table id 0 is reserved for default VRFInvalid table ID for the VRF.Modify VRF configuration.
ERRORFailed to update VRF [str] to table id [uint]Failed to update the VRF table ID.File a ticket with Cumulus Support.
ERRORFailed to add VRF [str] with table id [uint]Failed to add the VRF.File a ticket with Cumulus Support.
ERRORFailed to set type to ‘vrf’ in link filterFailed to update the Netlink cache link type.File a ticket with Cumulus Support.
ERRORFound [int] VRF entries after sync. cleaning up.VRF entries remaining after sync operation.File a ticket with Cumulus Support.
ERRORIgnoring attempts to delete default route for table 0Failed to remove the default route.File a ticket with Cumulus Support.
ERRORMaster interface not found in nl cache for index [int]Link object not found in Netlink cache.File a ticket with Cumulus Support.
ERRORMaximum number of VRFs already exist. Can not add VRF for table [uint]More VRFs have been configured than the maximum number supported by the platform.Reduce the number of configured VRFs.
ERRORFailed to delete REPL route from Hash TableFailure in VRF route leak feature. This message notifies that an entry could not be properly deleted from one of the software tables.File a ticket with Cumulus Support.
ERRORFailed to add route [str]Failure in VRF route leak feature. This message notifies that a route entry could not be properly added to one of the software tables.File a ticket with Cumulus Support.
ERRORRoute [str] in HW, but not in HAL cache. Adding.Happens when HAL resync is triggered. Route discovered in hardware but it is not in the software database.No action is required as software auto-corrects.
ERRORHW route [str] doesn’t match HAL route [str]. Updating.Happens when HAL resync is triggered. Route discovered in hardware but it is not matching the software database.No action is required as software auto-corrects.
ERRORRoute [str] in HAL cache, but not in HW. Deleting.Happens when HAL resync is triggered. Route discovered in software but it is not seen in the hardware.No action is required as software auto-corrects.
ERRORNo parent interface for [str]The parent interface of an interface could not be derived. This is a software issue.File a ticket with Cumulus Support.
ERROR[str]: sfs backing pointer is NULLFUSE file pointer is NULL.File a ticket with Cumulus Support.
ERRORport sample rate string not foundPort sampling rate is not set.Correct the configuration.
ERROR[str]: hal port pointer is NULL for port sample string [str]Port pointer is incorrect when port sampling is set.File a ticket with Cumulus Support.
ERRORport sample rate string [str] not recognizedPort sampling rate is not configured properly.Correct the configuration.
ERRORport sample interface [str] in port sample string ‘[str]’ not recognizedPort sampling port-name is not configured properly.Correct the configuration.
ERRORport sample rate value not recognized in string [str]Port sampling value is not configured properly.Correct the configuration.
ERRORport sample rate value [str] does not contain a valid integerPort sampling value is not configured properly using integer values.Correct the configuration.
ERROR[int] mroutes were ignored due to total capacity.Maximum number of multicast routes exceeded.Reduce the number of multicast routres in the switch/fabric.
ERRORlocal_ip format in fuse node is incorrect [str]Local_IP value formatting in FUSE file is incorrect.Correct the configuration.
ERRORlocal_ip fuse node read failedLocal_IP value formatting in FUSE file is invalid.Correct the configuration.
ERRORvxlan encap dscp action invalidVXLAN encap DSCP action in FUSE file is invalid.Correct the configuration.
ERRORvxlan encap dscp action [[str]] invalidVXLAN encap DSCP action formatting in FUSE file is invalid.Correct the configuration.
ERRORvxlan decap dscp action invalidVXLAN decap DSCP action in FUSE file is invalid.Correct the configuration.
ERRORvxlan decap dscp action invalidVXLAN decap DSCP action formatting in FUSE file is invalid.Correct the configuration.
ERRORsx_api_lag_hash_flow_params_set failed: [str]Set hash flow parameters failed in the SDK.
ERRORbond IDs exhaustedMaximum number of bonds exhausted.Reduce the numbert of configured bonds.
ERRORbond_id [uint] swid [uint] lag create failed: [str]Setting a LAG port group failed in the SDK.
ERRORbond_id [uint] lag_id 0x%x port state set failed: [str]Port state could not be set to ADMIN_UP in the SDK.
ERRORbond_id [uint] lag_id 0x%x ingr_filter set failed: [str]Ingress filter set failed for specified bond_id and lag_id in the SDK.
ERRORbond_id [uint] old lag_id 0x%x not cleaned upCould not find the mapping of the bond_id with the old lag_id, hence cleanup was not successful.
ERRORlag_id 0x%x swid [uint] failed: [str]Removal of the LAG port group for the specified lag_id failed.
ERRORcannot find bond slave port [uint]During addition of a bond slave port to a bond, the slave port entry in the software tables could not be found.
ERRORifp not found for bond_id [uint]Software entry for a bond_id could not be found in the database.
ERROR[str] member [str] add failed: [str]Adding a member to a LAG group failed in the SDK.
ERROR[str] member [str] delete failed: [str]Deleting a member in a LAG group failed in the SDK.
ERRORinvalid port_storm_ctrl_type [uint]Invalid Storm-Control-Type (invalid value) detected in the software. Internal error.
ERRORunexpected duplicate bond if_key [str]Existing duplicate bond key found in the software table.
ERRORlag_id 0x%x with no corresponding bond idbond_id could not be located for the given lag_id.
ERROR[str] collector set failed for [str]: [str]Adding the specified port to the collector set for the bond failed.
ERROR[str] distributor set failed for [str]: [str]Adding the specified port to the distributor set for the bond failed.
ERRORcannot find base bond slave [str] for bond_id [int]During update of a bond, the slave port entry in the software tables could not be found.
ERRORunexpected duplicate bond interface [str]Existing duplicate bond interface found in the software table.
ERRORunexpected duplicate lag_id 0x%xExisting duplicate lag_id found in the software table.
ERRORinfo not found for bond_id [uint]An expected entry could not be found for a given bond_id in a software table.
ERROR[str] unexpected duplicate member [str]Duplicate entry for the specified interface found for a bond in a software table.
ERRORinfo not found for bond_id [uint]An expected entry could not be found for a given bond_id in a software table.
ERRORinitialization failed: [str]SDK API call for tunnel initialization failed.File a ticket with Cumulus Support.
ERRORlogical network type [uint] key [uint] not foundLogical network of given type and key was not found in the software tables.File a ticket with Cumulus Support.
ERRORlogical network type [uint] key [uint] not foundLogical network of given type and key was not found in the software tables.File a ticket with Cumulus Support.
ERRORfailed to create keys tunnel type [uint] and key [uint]Failed to create logical network keys of given tunnel type and interface key in the software tables.File a ticket with Cumulus Support.
ERRORfailed to update the decap key for gre entry tunnel_id:Failed to update the GRE decap keys for the given tunnel.File a ticket with Cumulus Support.
ERRORfailed to find the decap key for tunnel_id : (0x%x)Failed to find the GRE decap keys for the given tunnel.File a ticket with Cumulus Support.
ERRORfailed to update a decap entry tunnel_id : (0x%x)Failed to update the GRE decap keys for the given tunnel.File a ticket with Cumulus Support.
ERRORunexpected duplicate entry in gre_tunnel_key_htGRE tunnel key table has an existing duplicate entry.File a ticket with Cumulus Support.
ERRORunexpected duplicate entry in gre_tunnel_id_htGRE tunnel ID table has an existing duplicate entry.File a ticket with Cumulus Support.
ERRORunexpected duplicate entry in gre_olay_ulay_htGRE tunnel overlay/underlay table has an existing duplicate entry.File a ticket with Cumulus Support.
ERRORfailed to create the hw decap key for gre entry tunnel_id:Failed to create the GRE decap keys for the given tunnel.File a ticket with Cumulus Support.
ERRORfailed to create a decap entry tunnel_id : (0x%x)Failed to create a decap entry in the software table for the given tunnel_id.File a ticket with Cumulus Support.
ERRORunexpected duplicate entry in gre_decap_ht tunnel_idGRE decap table has an existing duplicate entry for the given tunnel.File a ticket with Cumulus Support.
ERRORfailed to createFailed to set up a tunnel between the given local and remote IP addresses.File a ticket with Cumulus Support.
ERRORunable to find overlay overlay info from overlay ifindex:While removing a GRE tunnel, the overlay info could not be retrieved from the software tables for the given ifindex.File a ticket with Cumulus Support.
ERRORfailed to create key for type [uint]Failed to create the GRE keys for the given tunnel type.File a ticket with Cumulus Support.
ERRORfailed to find gre entryFailed to find a logical network entry for a tunnel in the software tables during tunnel removal.File a ticket with Cumulus Support.
ERRORfailed to find gre entryFailed to find a GRE decap entry for a tunnel during tunnel removal.File a ticket with Cumulus Support.
ERRORFailed to open SX-API, error: [str]SDK API open failed.File a ticket with Cumulus Support.
ERRORFailed to set SDK VERBOSITY level, error: [str]Failed to set SDK VERBOSITY level.File a ticket with Cumulus Support.
ERRORnum_devices [uint] is invalidSDK found zero (asic) devices.File a ticket with Cumulus Support.
ERRORFailed to initialize SDK ([str])Failed to initialize SDK.File a ticket with Cumulus Support.
ERROR*** failed to configure the requested setup ***The board configuration could not be enforced.File a ticket with Cumulus Support.
ERRORmore devices encountered than configured [uint]More devices encountered than configured.File a ticket with Cumulus Support.
ERRORduplicate device ID [uint]Found an existing duplicate device when adding a new device.File a ticket with Cumulus Support.
ERRORinvalid unit [uint] num_devices [uint]Internal error: given unit number is out of range.File a ticket with Cumulus Support.
ERRORinvalid port [uint] num_ports [uint]Internal error: given port number is out of range.File a ticket with Cumulus Support.
ERRORERROR: Fail to extract data from XML fileThe topology map could not be extracted from the XML file.File a ticket with Cumulus Support.
ERRORDevice ID already addedA device is already added to the topology database.File a ticket with Cumulus Support.
ERRORDevice ID [uint] NOT found in the XML fileA device could not be found in the databse.File a ticket with Cumulus Support.
ERRORFailed to add device [uint] to the SDK (sx_api_topo_device_set)Failed to add a device to the topology database.File a ticket with Cumulus Support.
ERRORFailed to allocate memory for tree tree_info array,Memory exhausted.Restart switchd, if possible. File a ticket with Cumulus Support.
ERRORERROR: Fail to add topo treeTop tree could not be added.File a ticket with Cumulus Support.
ERRORFailed to set topo device ready for device [uint]: [str]Could not set DEVICE_READY in the SDK.File a ticket with Cumulus Support.
ERRORUnable to load file [str] (file not exists or corrupted )The specified XML configuration file could not be loaded as it either does not exist or is possibly corrupted.File a ticket with Cumulus Support.
ERRORUnable to parse file (error #[int]: [str])The specified XML configuration file could not be parsed.File a ticket with Cumulus Support.
ERRORExpat error #[int] (line [int] , column [int]): [str]A parsing error encountered when parsing the configuration file.File a ticket with Cumulus Support.
ERRORError parsing number of devicesError parsing the number of child devices in the XML configuration file.File a ticket with Cumulus Support.
ERRORError parsing device mac addressError parsing the device MAC address in the XML configuration file.File a ticket with Cumulus Support.
ERRORError parsing device MAC addressError parsing the device MAC address in the XML configuration file.File a ticket with Cumulus Support.
ERRORError mac cannot be 00:00:00:00:00:00Found a device MAC address of all zeores in the XML configuration file.File a ticket with Cumulus Support.
ERRORFailed running [str]Specified system command failed.File a ticket with Cumulus Support.
ERRORError parsing dev_numberError parsing the device number in the XML configuration file.File a ticket with Cumulus Support.
ERRORError parsing device mac addressError parsing the device MAC address in the XML configuration file.File a ticket with Cumulus Support.
ERRORError parsing device MAC addressError parsing the device MAC address in the XML configuration file.File a ticket with Cumulus Support.
ERRORError parsing number of physical ports valueError parsing the number of PHY ports in the XML configuration file.File a ticket with Cumulus Support.
ERRORInvalid number of physical ports [uint]Found zero or more than the allowed maximum port numbers in the XML configuration file.File a ticket with Cumulus Support.
ERRORError parsing ports list sectionError parsing the port list section in the XML configuration file.File a ticket with Cumulus Support.
ERRORError parsing local port numberError parsing the local port number in the XML configuration file.File a ticket with Cumulus Support.
ERRORError parsing mapping modeError parsing the mapping mode in the XML configuration file.File a ticket with Cumulus Support.
ERRORError parsing label portError parsing the label port in the XML configuration file.File a ticket with Cumulus Support.
ERRORError parsing width valueError parsing the port width in the XML configuration file.File a ticket with Cumulus Support.
ERRORError parsing RX lanes value , local port: [[int]]Error parsing the RX lanes value in the XML configuration file.File a ticket with Cumulus Support.
ERRORError parsing lanes value , local port: [[int]]Error parsing the lanes value in the XML configuration file.File a ticket with Cumulus Support.
ERRORError parsing lanes value, local port: [[int]]Error parsing the lanes value in the XML configuration file.File a ticket with Cumulus Support.
ERRORError parsing lane to module value, local port: [[int]]Error parsing the lane to module mapping value in the XML configuration file.File a ticket with Cumulus Support.
ERRORError parsing lane to module value , local port: [[int]]Error parsing the lane to module mapping value in the XML configuration file.File a ticket with Cumulus Support.
ERRORError parsing port mode valueError parsing the in the port mode value XML configuration file.File a ticket with Cumulus Support.
ERRORError parsing port speed valueError parsing the in the port speed value XML configuration file.File a ticket with Cumulus Support.
ERRORError parsing swid valueError parsing the swid value in the XML configuration file.File a ticket with Cumulus Support.
ERRORError parsing autoneg valueError parsing the autoneg value in the XML configuration file.File a ticket with Cumulus Support.
ERRORConflict detected in lid 0x%0x port [uint] dev_id [uint]lid already detected in a software table.File a ticket with Cumulus Support.
ERRORport_device_set has failed for device [uint] ([str])Could not set a port device to the SDK.File a ticket with Cumulus Support.
ERRORtopo_xml_device_add failed for device [uint] ([str])A device could not be added to a topo_xml_device database.File a ticket with Cumulus Support.
ERRORmode set dev [int] port 0x%x failed: [str]Port mode could not be set to STACKING mode in the SDK.File a ticket with Cumulus Support.
ERRORbinding dev [int] port 0x%x to swid [int] failed: [str]Binding the device and port to the swid failed in the SDK.File a ticket with Cumulus Support.
ERRORport_init dev [int] port 0x%x failed: [str]Specified device/port could not be initialized in the SDK.File a ticket with Cumulus Support.
ERRORswid set failed: [str]swid set failed in the SDK.File a ticket with Cumulus Support.
ERRORFailed to set port 0x%x mapping: [str]Port mapping failed for the specified port in the SDK.File a ticket with Cumulus Support.
ERRORFailed to set port 0x%x mapping: [str]Port mapping failed for the specified port in the SDK.File a ticket with Cumulus Support.
ERRORinvalid bridge_vlan [uint] for bridge_id [int]The specified bridge_vlan is not valid for the given bridge_id.File a ticket with Cumulus Support
ERRORvfid not set for vlan [uint]VFID is not set for the specified VLAN.File a ticket with Cumulus Support.
ERRORnew group check failed for vlan [uint] mac [str]: [str]The specified MAC address and VLAN already exist in a group.File a ticket with Cumulus Support.
ERRORold port list get failed for vlan [uint] mac [str]: [str]Could not find the existing port list for the given MAC address and VLAN.File a ticket with Cumulus Support.
ERRORport delete failed for vlan [uint] mac [str]: [str]Could not delete the existing port list for the given MAC address and VLAN.File a ticket with Cumulus Support.
ERRORcreate failed for vlan [uint] mac [str]: [str]Could not create a new multicast group for the given MAC address and VLAN.File a ticket with Cumulus Support.
ERRORport add failed for vlan [uint] mac [str]: [str]Could not add a port to the port list for the given MAC address and VLAN.File a ticket with Cumulus Support.
ERRORinvalid bridge_vlan [uint] for bridge_id [int]The specified bridge_vlan is not valid for the given bridge_id.File a ticket with Cumulus Support.
ERRORvfid not set for vlan [uint]The specified MAC address and VLAN already exist in a group.File a ticket with Cumulus Support.
ERRORgroup delete failed for vlan [uint] mac [str]: [str]Could not delete a multicast group for the given MAC address and VLAN.File a ticket with Cumulus Support.
ERRORinvalid bridge_vlan [uint] for bridge_id [int]The specified bridge_vlan is not valid for the given bridge_id.File a ticket with Cumulus Support.
ERRORvfid not set for vlan [uint]VFID is not set for the specified VLAN.File a ticket with Cumulus Support.
ERRORflood_mode_get failed for swid [int] vfid [int] [str]Flood mode value could not be retrieved for the given swid/port/vfid.File a ticket with Cumulus Support.
ERRORunreg_mc_flood_ports fail for swid [int], vfid [int], [str]Unregistered multicast flood ports setting for given swid/port/vfid failed in the SDK.File a ticket with Cumulus Support.
ERRORmroute ports [int] exceeds [int]A multicast route has a larger number of ports than the RIFs on the switch.File a ticket with Cumulus Support.
ERRORno container id retrieved for [str]Egress container could not be retrieved.File a ticket with Cumulus Support.
ERRORroute cmd [str] failed: [str]Setting multicast route in the SDK failed.File a ticket with Cumulus Support.
ERRORrouter table_id [uint] vrid [int] set failed: [str]Setting a VRID for a router failed.File a ticket with Cumulus Support.
ERRORunexpected duplicate key list size [uint]Unexpected duplicate entry found in next-hop list.File a ticket with Cumulus Support.
ERRORunexpected duplicate key type [str] min_mtu [uint] fid [uint]Unexpected duplicate entry in container anchor.File a ticket with Cumulus Support.
ERRORunexpected duplicate nh_list num_elems [uint]Unexpcted duplicate next-hop list in container.File a ticket with Cumulus Support.
ERRORfailed for nh_list num_elems [uint]: [str]Could not create a new container for the next-hop list in the SDK.File a ticket with Cumulus Support.
ERRORfailed for type [str] container_id [uint] num_elems [uint]: [str]Could not free a container for the next-hop list in the SDK.File a ticket with Cumulus Support.
ERRORunsupported chip type [uint]Chip type in table is not supported.File a ticket with Cumulus Support.
ERRORinvalid parse depthVXLAN parsing depth setting is invalid.File a ticket with Cumulus Support.
ERRORunexpected duplicate ln_type [uint] ln_key [uint]Unexpected duplicate entry in logical VPN key table.File a ticket with Cumulus Support.
ERRORunexpected duplicate ID 0x%xUnexpected duplicate entry in logical VPN ID table.File a ticket with Cumulus Support.
ERRORunsupported ln_type [int] or ln_key [int]Unsupported logical network type encountered.File a ticket with Cumulus Support.
ERRORunexpected duplicate ln_type [uint] ln_key [uint]Unexpected duplicate entry in logical network table.File a ticket with Cumulus Support.
ERRORlid 0x%x remote_ip [str] not foundLocal ID to remote_ip mapping retrieval failed.File a ticket with Cumulus Support.
ERRORunexpected duplicate key [uint]Unexpected duplicate entry in the VPN map table.File a ticket with Cumulus Support.
ERRORinvalid VPN or vlan [uint]Invalid VPN/VLAN value provided for creating a VPM map entry.File a ticket with Cumulus Support.
ERRORunexpected duplicate entryUnexpected duplicate entry in VPN decap table.File a ticket with Cumulus Support.
ERRORinvalid VPNInvalid VPN value provided for creating a VPN decap entry.File a ticket with Cumulus Support.
ERRORunexpected duplicate key [str] type [uint]Unexpected duplicate entry in VPN next-hop table.File a ticket with Cumulus Support.
ERRORtunnel get failed: [str]Tunnel attribute retrieval from the SDK failed.File a ticket with Cumulus Support.
ERRORtunnel update failed: [str]Tunnel attribute update in the SDK failed.File a ticket with Cumulus Support.
ERRORcreation failed: [str]VXLAN tunnel creation failed.File a ticket with Cumulus Support.
ERRORtunnel_id 0x%x hash set failed: [str]VXLAN UDP header src port control setting in SDK for enabling better entropy failed.File a ticket with Cumulus Support.
ERRORunsupported type [uint]Unsupported tunnel type encountered.File a ticket with Cumulus Support.
ERRORunexpected duplicate key for tunnel_id 0x%xUnexpected duplicate entry in logical VPN tunnel key table.File a ticket with Cumulus Support.
ERRORunexpected duplicate ID for tunnel_id 0x%xUnexpected duplicate entry in logical VPN ID table.File a ticket with Cumulus Support.
ERRORunexpected duplicate ln_type [uint] ln_key [uint]Unexpected duplicate entry in logical network table.File a ticket with Cumulus Support.
ERRORupdate failed: [str]VXLAN tunnel update failed.File a ticket with Cumulus Support.
ERRORunsupported type [uint]Unsupported tunnel type encountered.File a ticket with Cumulus Support.
ERRORtunnnel_id 0x%x failed: [str]VXLAN tunnel destroy failed.File a ticket with Cumulus Support.
ERRORtunnel_id 0x%x ttl [uint] failed: [str]VXLAN tunnel TTL set failed.File a ticket with Cumulus Support.
ERRORfailed: [str]VXLAN tunnel map set failed.File a ticket with Cumulus Support.
ERRORvfid not available for vlan [uint]VFID is not set for the specified VLAN.File a ticket with Cumulus Support.
ERRORfailed: [str]VXLAN tunnel map set failed.File a ticket with Cumulus Support.
ERRORfailed: [str]Tunnel decap entry could not be set.File a ticket with Cumulus Support.
ERRORfailed: [str]Tunnel decap entry could not be set.File a ticket with Cumulus Support.
ERROR[str] group_id [uint] vid [uint] failed: [str]FDB flood set for a group failed.File a ticket with Cumulus Support.
ERRORgroup_id [uint] vid [uint] failed: [str]FDB flood set for a group failed.File a ticket with Cumulus Support.
ERRORcreation failed: [str]VPN device addition to the SDK failed.File a ticket with Cumulus Support.
ERRORunexpected duplicate entryVPN port table has an existing duplicate entry.File a ticket with Cumulus Support.
ERRORvpn_port 0x%x failed: [str]VPN device deletion from the SDK failed.File a ticket with Cumulus Support.
ERRORtunnel encap dscp action PRESERVE is invalidPRESERVE is not a valid action.Check configuration.
ERRORtunnel_id 0x%x cos set failed: [str]COS set failed for a tunnel.File a ticket with Cumulus Support.
ERRORtunnel decap dscp action SET is invalidSET is not a valid DSCP action.Check configuration.
ERRORtunnel_id 0x%x cos set failed: [str]COS set failed for a tunnel.File a ticket with Cumulus Support.
ERRORtunnel id not found: ln_type [uint] ln_key [uint]Specified tunnel ID was not found in the VPN table.File a ticket with Cumulus Support.
ERRORError opening socket for grat arp [str], ifi [int]: [str]Gratuitous ARP socket could not be opened.File a ticket with Cumulus Support.
ERRORError sending grat arp [str], ifi [int]: [str]Gratuitous ARP socket could not be sent.File a ticket with Cumulus Support.
ERRORFailed to update table id for port [int], interface [str]/[int]table_id could not be updated for a port.File a ticket with Cumulus Support.
ERRORinterface not found at index [int]Interface information for a given ifindex could not be found.File a ticket with Cumulus Support.
ERRORFailed to open IPv4 socket [str]IPv4 socket open failed.File a ticket with Cumulus Support.
ERRORFailed to set SO_RCVBUF [str]Socket option SO_RCVBUF set failed.File a ticket with Cumulus Support.
ERRORNo source MAC address ifindex [int], [str]No source MAC address found for given ifiindex.File a ticket with Cumulus Support.
ERRORFailed to open IPv6 socket [str]IPv6 socket open failed.File a ticket with Cumulus Support.
ERRORFailed to set SO_RCVBUF [str]Socket option SO_RCVBUF set failed.File a ticket with Cumulus Support.
ERRORNo source MAC address ifindex [int], [str]No source MAC address found for given ifiindex.File a ticket with Cumulus Support.
ERRORAdding ctx to hash table failedAdding ctx to hash table failed.File a ticket with Cumulus Support.
ERRORGetting pktinj failedGetting pktinj failed.File a ticket with Cumulus Support.
ERRORERSPAN target is supported with the following field(s): –src-ip –dst-ip .ACL unsupported ERSPAN target.See ACL user documentation.
ERRORInverse flags not supported for UDPACL inverse match not supported.See ACL user documentation.
ERRORSpecified Match [str] not supportedACL unsupported match.See ACL user documentation.
ERRORSpecified Target [str] not supportedACL unsupported target.See ACL user documentation.
ERRORInverse flags not supported for ARPACL inverse match not supported.See ACL user documentation.
ERRORInverse flags not supported for IPACL inverse match not supported.See ACL user documentation.
ERRORInverse flags not supported for IPv6ACL inverse match not supported.See ACL user documentation.
ERRORTraffic class [hex] not supported for IPACL unsupported match.See ACL user documentation.
ERRORRange for ICMP Types i.e [hex]-[hex] not supportedACL unsupported match.See ACL user documentation.
ERRORRange for ICMP codes i.e [hex]-[hex] not supportedACL unsupported match.See ACL user documentation.
ERRORInvert flags not supported for mark_mACL unsupported match.See ACL user documentation.
ERROROR bitmask [hex] not supported for mark_m matchACL unsupported match.See ACL user documentation.
ERRORInverse flags not supported for VLANACL inverse match not supported.See ACL user documentation.
ERRORInverse flags not supported for ICMPACL inverse match not supported.See ACL user documentation.
ERRORvlanid match not supported for VLANACL vlanid usupported match.See ACL user documentation.
ERRORvlan prio match not supported for VLANACL vlan prio unsupported match.See ACL user documentation.
ERRORIP, IPv6, ARP options are not supported for LOGACL unsupported match for LOG action.See ACL user documentation.
ERRORInterface [str] not supported for SPANACL unsupported target.See ACL user documentation.
ERRORSPAN target is supported with the followingACL unsupported SPAN target.See ACL user documentation.
ERRORERSPAN target is supported with the followingACL unsupported match.See ACL user documentation.
ERRORInverse flags not supported for ICMPv6ACL inverse match not supported.See ACL user documentation.
ERRORtarget bitmask [hex] not supported for markACL unsupported verdicts continue/return/etc.See ACL user documentation.
ERRORSpecified Match [str] not supportedACL unsupported match.See ACL user documentation.
ERRORSpecified watcher [str] not supportedACL unsupported watcher action.See ACL user documentation.
ERRORSpecified target [str] not supportedACL unsupported target action.See ACL user documentation.
ERRORInverse flags not supported for MultiportACL inverse match not supported.See ACL user documentation.
ERRORInverse flags not supported for TOSACL inverse match not supported.See ACL user documentation.
ERRORInverse flags not supported for DSCPACL inverse match not supported.See ACL user documentation.
ERRORInverse flags or Limit Interface or Source not supported for addrtypeACL inverse match not supported.See ACL user documentation.
ERRORDest addrtypes other than IPROUTER/LOCAL not supportedACL unsupported match for addrtype.See ACL user documentation.
ERRORIP6 Fragment IDs not supportedACL unsupported match.See ACL user documentation.
ERRORIP6 Length/Reserved or Last or More fragment Fields not supportedACL unsupported match.See ACL user documentation.
ERRORGreater/Lesser/Not equal to mode not supported for TTL fieldACL unsupported match.See ACL user documentation.
ERRORGreater/Lesser/Not equal mode not supported for HL fieldACL unsupported match.See ACL user documentation.
ERRORInverse flags not supported for match markACL inverse match not supported.See ACL user documentation.
ERRORTCP SEQ, TCP Options or IP options, UID are not supported for LOGACL unsupported match.See ACL user documentation.
ERRORTCP SEQ, TCP Options or IP options, UID are not supported for LOGACL unsupported match.See ACL user documentation.
ERRORInverse flags or options not supported for TCPACL inverse match not supported.See ACL user documentation.
ERRORInterface [str] not supported for SPANACL unsupported target interface in SPAN rule.See ACL user documentation.
ERRORSPAN target is supported with the following " field(s): –dport swp."ACL unsupported SPAN target.See ACL user documentation.
ERRORInterface [str] not supported for SPANACL unsupported target interface.See ACL user documentation.
ERRORSPAN target is supported with the following field(s): –dport swp.ACL unsupported SPAN target.See ACL user documentation.
ERRORresource region [uint] destroy failed: [str]ACL: Mellanox API for region destroy failed.File a ticket with Cumulus Support.
ERRORresource region [uint] size [uint] create failed: [str]ACL: Mellanox API for TCAM region create failed.Check if there are too many rules/tables.
ERRORunexpected duplicate key [str]ACL: Internal interface cache has duplicate.File a ticket with Cumulus Support.
ERRORunexpected duplicate user: [str] key_idx [val] offset [val]ACL: Duplicate entry in interface rule hash.File a ticket with Cumulus Support.
ERRORexpected trap_id [uint](actual [uint]) type [uint] (actual [val])ACL: INPUT chain trap counter get ID invalid.File a ticket with Cumulus Support.
ERRORtable [str] chain [str] region [str] [str] size [uint] creation failed: [str]ACL: Mellanox API for TCAM region create failed.Check if there are too many rules/tables.
ERRORtable [str] chain [str] region [str] [str] size [uint] acl_id creation failed: [str]ACL: Mellanox API for ACL ID create failed.Check if there are too many rules/tables.
ERRORtable [str] chain [str] region [str] [str] rules del @offset [val] num_rules [val] failed: [str]ACL: Mellanox API for setting region to ACL ID failed.File a ticket with Cumulus Support.
ERRORtable [str] chain [str] region [str] [str] size [uint] acl_id destroy failed: [str]ACL: Mellanox API for unsetting region from ACL ID failed.File a ticket with Cumulus Support.
ERRORtable [str] chain [str] region [str] [str] size [uint] destroy failed: [str]ACL: Mellanox API for region destroy failed.File a ticket with Cumulus Support.
ERRORtable [str] chain [str] region [str] [str] rules add @offset [val] num_rules [val] failed: [str]ACL: Mellanox API for setting rule in a region failed.File a ticket with Cumulus Support.
ERRORtable [str] chain [str] failed to allocate Mark value [val]ACL: Mark value alloc failed.File a ticket with Cumulus Support.
ERRORtable [str] chain [str] Mark values must be less than [val] when partial mask is in useACL: Masked mark use limitation.Change mask match rules.
ERRORPBR: Unsupported route type ecmpPBR: Invalid ECMP route.File a ticket with Cumulus Support.
ERRORPBR: Unsupported route type singe hopPBR: Invalid non-ECMP route.File a ticket with Cumulus Support.
ERRORtable [str] chain [str] region [str] action [str] is not supportedACL: Unsupported action.Remove rule with the action.
ERRORPBR: couldn’t set default forward action for rulePBR: Default action accept couldn’t be set for PBR rules.File a ticket with Cumulus Support.
ERROR[str] offset [uint] or key_idx [uint] exceeds rule list size [uint] or descriptor size [val]ACL: Too may rules in a region.File a ticket with Cumulus Support.
ERROR[str] offset [uint] key_idx [uint] invalid key_id [uint]ACL: Invalid src/dst port/intf in rule.Remove the rule.
ERRORacl group [str] creation failed: [str]ACL: Mellanox API for ACL group create failed.Check for too many ACL tables
ERRORtable [str] chain [str] key handle create failed: [str]ACL: Mellanox API to create a key list handle failed.File a ticket with Cumulus Support.
ERRORtable [str] chain [str] key attr query failed: [str]ACL: Mellanox API to get key attributes failed.File a ticket with Cumulus Support.
ERRORtable [str] chain [str] key handle delete failed: [str]ACL: Mellanox API for key handle delete failed.File a ticket with Cumulus Support.
ERRORtable [str] chain [str] region [str] [str] size [uint] offset too largeACL: Rule offset in region larger than region size.File a ticket with Cumulus Support.
ERRORregion set failed: [str]ACL: Mellanox API for TCAM region create failed.Check if there are too many rules/tables.
ERRORanv set failed: [str]ACL: Mellanox API for ACL ID create failed.Check if there are too many rules/tables.
ERRORrules set failed: [str]ACL: Mellanox API for rule set failed.Check if there are too many rules.
ERROR[str] malloc failedACL: Memory resource allocation error.File a ticket with Cumulus Support.
ERRORtable [str] chain [str] too many keys in ruleACL: Too many keys used in a rule.Delete the rule.
ERRORtable [str] chain [str] too many actions in rule"ACL: Too many actions in rule.Modify the rule.
ERRORtable [str] chain [str] rule can match on a single output interface onlyACL: Rule match limitation.Delete the rule.
ERRORtable [str] chain [str] number of input interfaces ([uint]) cannot be less than number of output interfaces ([val])ACL: Rule replication limitation.Remove the rule.
ERRORtable [str] chain [str] key classification missing for [val] input bridge interface(s)ACL: Ingress/egress intf missing.Check ACL rules.
ERRORtable [str] chain [str] key classification missing for [val] input interface(s)ACL: Ingress/egress port/bond missing.Check ACL rules.
ERRORanalyzer set failed: [str]ACL: Mellanox API for setting ERSPAN analyzer port failed.File a ticket with Cumulus Support.
ERRORsession [uint] [str] failed: [str]ACL: Mellanox API for en/dis of SPAN session failed.File a ticket with Cumulus Support.
ERRORsession [uint] edit failed: [str]ACL: Mellanox API for ERSPAN session modify failed.File a ticket with Cumulus Support.
ERRORsession [uint] [str] lid 0x%x add failed: [str]ACL: Mellanox API to set SPAN mirror source failed.File a ticket with Cumulus Support.
ERRORsession [uint] [str] lid 0x%x delete failed: [str]ACL: Mellanox API to unset SPAN mirror sources failed.File a ticket with Cumulus Support.
ERRORspan init failed: [str]ACL: Mellanox API for SPAN engine initialization failed.File a ticket with Cumulus Support.
ERRORUnexpected duplicate session keyACL: Duplicate SPAN session key.File a ticket with Cumulus Support.
ERRORsession create failed: [str]ACL: Mellanox API for session create failed.File a ticket with Cumulus Support.
ERRORout of SPAN/ERSPAN sessionsACL: Too many SPAN/ERSPAN session targets.Check and reduce SPAN sesions.
ERRORsession [uint] analyzer delete failed: [str]ACL: Mellanox API for session delete failed.File a ticket with Cumulus Support.
ERRORsession [uint] destroy failed: [str]ACL: Mellanox API for for session destroy failed.File a ticket with Cumulus Support.
ERRORNon flow-based SPAN does not support router interfaceACL: Non-flow based cannot SPAN from routed interface.Remove these SPAN rules.
ERRORNon flow-based SPAN does not support sub-interfaceACL: Non-flow based cannot SPAN from routed sub-interface.Remove these SPAN rules.
ERRORunsupported session_type [uint]ACL: Mirror session has to be SPAN or ERSPAN.Remove these rules.
ERRORrouter interface ([str]) is not supported as SPAN dportACL: SPAN destination cannot be router interface.Remove these rules.
ERRORunsupported chip type [uint]ACL: Wrong plaform/chip type.File a ticket with Cumulus Support.
ERRORpolicer creation failed: [str]ACL: Mellanox internal API to allocate a policer resource failed.Check number of ACL rules using policers.
ERRORunexpected duplicate ID [val]ACL: Duplicate policer ID allocated.File a ticket with Cumulus Support.
ERRORpolicer [val] delete failed [str]ACL: Mellnox internal API to delete policer resource failed.File a ticket with Cumulus Support.
ERRORtricolor conversion failed pir [uint] cir [uint] cbs [val] ebs [val]ACL: Converting tricolor policer rates to kbps failed.File a ticket with Cumulus Support.
ERRORconversion failed mode [uint] rate [uint] burst [uint]ACL: Converting color bind policer rates to kpbs failed.File a ticket with Cumulus Support.
ERRORcounter creation failed: [str]ACL: Mellanox internal API for allocating a counter failed.Check number of ACL rules.
ERRORcounter [uint] delete failed: [str]ACL: Mellanox internal API for counter delete failed.File a ticket with Cumulus Support.
ERRORcounter [uint] failed: [str]ACL: Mellanox internal API for counter read failed.File a ticket with Cumulus Support.
ERRORpolicer [val] counter failed: [str]ACL: Mellanox internal API for for policer counter read failed.File a ticket with Cumulus Support.
ERRORinvalid interface [str]ACL: Invalid interface specified in ACL rule.Check ACL rule set.
ERRORbond id [uint] not fully establishedACL: Bond interface not fully up.Check bond interface configuration on local/remote ends.
ERRORunsupported interface type: [str]ACL: An ACL rule has an unsupported type of interface specified in match.Check ACL rule set for interfaces specified.
ERRORmixing PBS ports in different swids [uint] and [uint] is not allowedACL: SPAN using policy-based switching doesn’t support target ports in different units.Change SPAN rule configuration.
ERRORunexpected duplicate PBS key with [uint] port(s)ACL: Duplicate PBS key used for SPAN.File a ticket with Cumulus Support.
ERRORcreate failed for PBS record with [uint] port(s): [str]ACL: Mellanox internal API for PBS set failed.File a ticket with Cumulus Support.
ERRORpbs_id [uint] delete failed: [str]ACL: Mellanox internal API for PBS ID delete failed.File a ticket with Cumulus Support.
ERROR[str] failed for pbs_id [uint]: [str]ACL: Mellanox internal API for PBS ID delete failed.File a ticket with Cumulus Support.
ERRORgroup [str] set failed: [str]ACL: Mellanox internal API that binds an ACL group to a hardware resource like port/VLAN failed.File a ticket with Cumulus Support.
ERRORuser tokens exhaustedACL: Mellanox internal API for user token alloc failed.Check number of ACL rules.
ERRORhardware platform does not support user tokensACL: Mellanox plaform doesn’t support user tokens.File a ticket with Cumulus Support.
ERRORunexpected duplicate mark key [uint]ACL: User token duplicate allocated.File a ticket with Cumulus Support.
ERRORbind [str] set failed on port 0x%x: [str]ACL: Mellanox internal API that binds an ACL group to a port failed.File a ticket with Cumulus Support.
ERRORbind [str] unset failed on port 0x%x: [str]ACL: Mellanox internal API that unbinds an ACL group from a port failed.File a ticket with Cumulus Support.
ERRORbind [str] cmd [uint] failed on bond 0x%x: [str]ACL: Mellanox internal API that un/binds an ACL group with a bond interface failed.File a ticket with Cumulus Support.
ERRORbind [str] set failed on port 0x%x: [str]ACL: Mellanox internal API that binds an ACL group to a bond member failed.File a ticket with Cumulus Support.
ERRORbind [str] cmd [uint] failed on RIF 0x[uint]: [str]ACL: Mellanox internal API that binds an ACL group to an L3 ingress interface failed.File a ticket with Cumulus Support.
ERRORgroup set failed: [str]ACL: Mellanox internal API that sets the group of an ACL failed.File a ticket with Cumulus Support.
ERRORrange creation failed: [str]ACL: Mellanox internal API to allocate an L4 port range resource failed.Check number of ranges being used in ACLs.
ERRORrange delete failed: [str]ACL: Mellanox internal API to free an L4 port range resource failed.File a ticket with Cumulus Support.
ERRORtable [str] chain [str] region [str] [str] size [uint] creation failed: [str]ACL: Mellanox API for TCAM region create failed.Check if there are too many rules/tables.
ERRORtable [str] chain [str] region [str] [str] size [uint] acl_id creation failed: [str]ACL: Mellanox API for ACL ID create failed.Check if there are too many rules/tables.
ERRORtable [str] chain [str] region [str] [str] rules del @offset [val] num_rules [val] failed: [str]ACL: Mellanox API for setting region to ACL ID failed.File a ticket with Cumulus Support.
ERRORtable [str] [str] chain [str] region [str] [str] rules del @offset [val] num_rules [val] failed: [str]ACL: Mellanox API for setting region to ACL ID failed.File a ticket with Cumulus Support.
ERRORtable [str] [str] chain [str] region [str] [str] size [uint] acl_id destroy failed: [str]ACL: Mellanox API for unsetting region from ACL ID failed.File a ticket with Cumulus Support.
ERRORtable [str] [str] chain [str] region [str] [str] size [uint] destroy failed: [str]ACL: Mellanox API for region destroy failed.File a ticket with Cumulus Support.
ERRORacl group [str] creation failed: [str]ACL: Mellanox API for ACL group create failed.Check for too many ACL tables.
ERRORtable [str] [str] chain [str] region [str] [str] size [uint] offset too largeACL: Rule offset in region larger than region size.File a ticket with Cumulus Support.
ERRORregion set failed: [str]ACL: Mellanox API for TCAM region create failed.Check if there are too many rules/tables.
ERRORanv set failed: [str]ACL: Mellanox API for ACL ID create failed.Check if there are too many rules/tables.
ERRORrules set failed: [str]ACL: Mellanox API for rule set failed.Check if there are too many rules.
ERRORiACL action cannot be satisfied with eACL keyACL: Invalid dependency between ingress and egress ACLs.Check ACL rules.
ERROReACL action cannot be satisfied with iACL keyACL: Invalid dependency between ingress and egress ACLs.Check ACL rules.
ERRORACL can match one single output interface onlyACL: Don’t support multiple out interface match.Check ACL rules.
ERRORexpected trap_id [uint] (actual [uint]) type [uint] (actual [val])ACL: INPUT chain trap counter get ID invalid.File a ticket with Cumulus Support.
ERROR[str] [str] API [str]: dlerror [str]nftables unsupported.Ignore this error message.
ERRORMemory allocation failedACL out of memory resource.File a ticket with Cumulus Support.
ERRORRule with LOG must be followed by same rule with DROPAn ACL rule with a LOG action must be followed by same rule with a DROP action.See ACL user documentation for more info.
ERRORRule with LOG must be followed by same rule with DROPAn ACL rule with a LOG action must be followed by same rule with a DROP action.See ACL user documentation for more info.
ERRORRule with log watcher must be have DROP actionAn ACL rule with a watcher action must be followed by same rule with a DROP action.See ACL user documentation for more info.
ERRORRule with LOG must be followed by same rule with DROPAn ACL rule with a LOG action must be followed by same rule with a DROP action.See ACL user documentation for more info.
ERROR[str] not found in hal_bondsACL: Bond interface in rule not present.Check bond configuration.
ERRORInverse flags for SRC/DST IP, IN/OUT interface, TOS, Protocol not supportedACL inverse match flags are not supported.See ACL user documentation.
ERRORTarget Verdict :[str] not supportedACL rule target verdict queue/stop/return/etc not supported.See ACL user documentation for supported targets.
ERRORFall through target not supportedACL fall through action not supported.See ACL documentation for supported actions.
ERRORJump, target:[val] not supportedACL jump action not supported.See ACL documentation for supported actions.
ERRORModule, target:[str] not supportedSpecified ACL action not supported.See ACL documentation for supported actions.
ERRORiptables: Invalid argumentiptables rules likely empty.Check iptables rules list.
ERRORiptables:Could not open raw IPv4,socket.Internal socket error.File a ticket with Cumulus Support.
ERRORiptables:Error retrieving getsockopt SO_GET_INFO:Internal socket error.File a ticket with Cumulus Support.
ERRORiptables: Memory allocation for counters failed for sizeACL out of memory resource.File a ticket with Cumulus Support.
ERRORiptables: Error retrieving getsockopt SO_GET_ENTRIES:Internal socket error.File a ticket with Cumulus Support.
ERRORiptables: Memory allocation for rules failed for sizeACL out of memory resource.File a ticket with Cumulus Support.
ERRORInverse flags for SRC/DST IP, IN/OUT interface, TOS, Protocol not supportedACL inverse match flags are not supported.See ACL user documentation.
ERRORTarget Verdict :[str] not supportedACL rule target verdict queue/stop/return/etc not supported.See ACL user documentation for supported targets.
ERRORFall through target not supportedACL fall through action not supported.See ACL documentation for supported actions.
ERRORJump, target:[val] not supportedACL jump action not supported.See ACL documentation for supported actions.
ERRORModule, target:[str] not supportedSpecified ACL action not supported.See ACL documentation for supported actions.
ERRORiptables: Invalid argumentiptables rules likely empty.Check iptables rules list.
ERRORip6tables:Could not open raw IPv6,socket.Internal socket error.File a ticket with Cumulus Support.
ERRORip6tables:Error retrieving getsockopt SO_GET_INFO:Internal socket error.File a ticket with Cumulus Support.
ERRORip6tables: Memory allocation for rules failed for sizeACL out of memory resource.File a ticket with Cumulus Support.
ERRORip6tables: Error retrieving getsockopt SO_GET_ENTRIES:Internal socket error.File a ticket with Cumulus Support.
ERRORiptables: Memory allocation for rules failed for sizeACL out of memory resource.File a ticket with Cumulus Support.
ERRORarptables:Could not open raw IPv6 socket.Internal socket error.File a ticket with Cumulus Support.
ERRORarptables:Error retrieving getsockopt SO_GET_INFO: [str]Internal socket error.File a ticket with Cumulus Support.
ERRORarptables: Error retrieving getsockopt SO_GET_ENTRIES: [str]Internal socket error.File a ticket with Cumulus Support.
ERRORInverse flags for SRC/DST MAC, IN/OUT/logical interface, Protocol not supportedACL unsupported match.See ACL documentation for supported matches.
ERRORlogical interface in:[str] out:[str] not supportedACL unsupported match.See ACL documentation for supported matches.
ERRORProtocol field: LENGTH not supportedACL unsupported LENGTH field match for Ethernet packets.See ACL documentation for supported matches.
ERRORPolicy not supportedACL unsupported ebtables action continue/return/etc.See ACL documentation for supported actions.
ERRORTarget verdict: [str] not supportedACL unsupported ebtables verdict.See ACL documentation for supported actions.
ERRORFall through or Jump target not supportedACL fall through/jump action not supported.See ACL documentation for supported actions.
ERRORTarget verdict: [str] not supportedACL target verdict queue/stop/return/etc not supported.See ACL user documentation for supported targets.
ERRORebtables: Invalid argumentiptables rules likely empty or read from kernel failed.Check ebtables rules list or file a ticket with Cumulus Support.
ERRORebtables:Could not open raw IPv4,socket.Internal socket error.File a ticket with Cumulus Support.
ERRORebtables:Error retrieving getsockopt SO_GET_INFO:Internal socket error.File a ticket with Cumulus Support.
ERRORebtables: Memory allocation for rules failed for sizeACL out of memory resource.File a ticket with Cumulus Support.
ERRORebtables: Error retrieving getsockopt SO_GET_ENTRIES:Internal socket error.File a ticket with Cumulus Support.
ERRORsfs_add: [str] failedACL: FUSE file system node creation failed.File a ticket with Cumulus Support.
ERRORMAX retries reached, stats sync acl failed - %dACL: Kernel updation of stats failed after retries.File a ticket with Cumulus Support.
ERRORhal_mlx_sdk_counter_wrap.c:357 ERR sx_api_flow_counter_bulk_set create failed with: No More ResourcesHardware offload of ACL rule set failed, typically due to TCAM resource exhaustion.Refer to Troubleshooting ACL Rule Installation Failures.
ERRORhal_mlx_flx_acl.c:9588 ERR flow_counter_bulk_set create failed with: No More ResourcesHardware offload of ACL rule set failed, typically due to TCAM resource exhaustion.Refer to Troubleshooting ACL Rule Installation Failures.
ERRORhal_mlx_flx_acl.c:3246 ERR BULK counter init failed with No More ResourcesHardware offload of ACL rule set failed, typically due to TCAM resource exhaustion.Refer to Troubleshooting ACL Rule Installation Failures.
ERRORhal_mlx_flx_acl.c:2765 hal_mlx_flx_chain_desc_install returned 0Hardware offload of ACL rule set failed, typically due to TCAM resource exhaustion.Refer to Troubleshooting ACL Rule Installation Failures.
ERRORhal_mlx_flx_acl.c:1981 ERR acl_plan_install returned 0Hardware offload of ACL rule set failed, typically due to TCAM resource exhaustion.Refer to Troubleshooting ACL Rule Installation Failures.
ERRORsync_acl hardware installation failedHardware offload of ACL rule set failed, typically due to TCAM resource exhaustion or unsupported rules.Refer to Troubleshooting ACL Rule Installation Failures.
ERRORsync_acl.c:225 ERR BULK counter init failed with No More ResourcesHardware offload of ACL rule set failed, typically due to TCAM resource exhaustion.Refer to Troubleshooting ACL Rule Installation Failures.
ERRORsync_acl.c:6669 ERR BULK counter init failed with No More ResourcesHardware offload of ACL rule set failed, typically due to TCAM resource exhaustion.Refer to Troubleshooting ACL Rule Installation Failures.
ERRORACL: Restore of current table failed: sync_acl hardware installation failedHardware restore of previously installed ACL rule set failed.File a ticket with Cumulus Support.
ERRORkernel tunnel not found for if_key [str]L2: Failed to lookup a tunnel interface.Check configuration.
ERROR[str] duplicate member [str] for bridge [int]L2: Duplicate bridge in hash table.File a ticket with Cumulus Support.
ERRORtc: u32 ip: unknown match: handle: [hex] index:[int] off:[int] offmask:[hex] val:[hex] mask: [hex]TC rule harware offload unsupported.Remove TC rules.
ERRORtc: u32 ip: match parse failed: handle: [hex], index:[int], rv: [int]TC rule harware offload unsupported.Remove TC rule.
ERRORTC: [str]TC rule harware offload unsupported.Remove TC rule.
ERRORTC: sync_clss hardware installation failedTC rule harware offload unsupported.Remove TC rule.
ERRORIPRULE: sync to h/w failed in non atomic mode. IPRULE rules deleted. Please retryFailed to install ACL rules.Remove ACL rules and reinstall ACL rules.
ERRORIPRULE: event handler failedFailed to install ACL rules.Remove ACL rules and reinstall ACL rules.
ERRORTC: sync to h/w failed in non atomic mode. TC rules deleted. Please retryFailed to install ACL rules.Remove ACL rules and reinstall ACL rules.
ERRORTC: event handler failedSyncing database failed between kernel and switchd.File a ticket with Cumulus Support.
ERRORsigaction failed for signal [int], [str]Failed to initialize signal handler.File a ticket with Cumulus Support.
ERRORIgnoring VRF [str]; table id 0 is reserved for default VRFFailed to add a new entry in the ARP table.
ERRORUnable to setup handling of SIGHUP for log rotation: [str]Failed to create a polling thread in NIC init.File a ticket with Cumulus Support.
ERRORread error on fd errno [int]Failed to attach a port in NIC.File a ticket with Cumulus Support.
ERROR[str] duplicate member [str] for bridge [int]Failed to allocate a member in the kernel bridge.Please check there are no duplicate bridge members.
ERROR[str]: no contextFailed to append the CSV command in Prescriptive Topology Manager.File a ticket with Cumulus Support.
ERROR[str]: Could not append keyFailed to append CSV command in Prescriptive Topology ManagerFile a ticket with Cumulus Support.
ERROR[str]: Could not append valFailed to append CSV command in Prescriptive Topology ManagerFile a ticket with Cumulus Support.
ERROR[str]: Could not allocate csvFailed to initialize the CSV command in Prescriptive Topology Manager.File a ticket with Cumulus Support.
ERROR[str]: Could not allocate recordFailed to initialize the CSV command in Prescriptive Topology Manager.File a ticket with Cumulus Support.
ERROR[str]: Could not allocate contextFailed to initialize the CSV command in Prescriptive Topology Manager.File a ticket with Cumulus Support.
ERROR[str]: no contextFailed to complete the CSV command in Prescriptive Topology Manager.File a ticket with Cumulus Support.
ERROR[str]: cannot serializeFailed to complete the CSV command in Prescriptive Topology Manager.File a ticket with Cumulus Support.
ERRORfatal recv error([str]), closing connection, rc [int]Failed to complete the CSV command in Prescriptive Topology Manager.File a ticket with Cumulus Support.
ERRORCannot allocate csv for msgFailed to read the CSV command in Prescriptive Topology Manager.File a ticket with Cumulus Support.
ERROR[str]: Could not allocate contextFailed to decode the CSV command in Prescriptive Topology Manager.File a ticket with Cumulus Support.
ERRORSTP mode_set failed for port [int]: [str]Failed to set spanning tree mode in port [uint], error msg [str]. Forwarding behavior would be impacted by this failure.File a ticket and contact Cumulus Support.
ERRORfailed to set port [int] vlan_ingress_filter enableFailed to set VLAN ingress filter for port [uint], error msg [str].File a ticket and contact Cumulus Support.
ERRORfailed to set FDB polling interval swid [uint]: [str]Failed to set FDB polling interval for Mellanox SDK switchd id [int], error msg [str]. Failure to do this impacts MAC address learning behavior.File a ticket and contact Cumulus Support.
ERRORfailed to set FDB notify_params swid [uint]: [str]Failed to set FDB MAC address learning notification in Mellanox SDK for switch id [uint], error msg [str]. This error impacts the capability of the switch to learn MAC address.File a ticket and contact Cumulus Support.
ERRORfailed to create trap group [uint] trap id [uint] swid [uint] group_attr.prio : [int] error: [str]Failed to create the TRAP groups in the Mellanox SDK. Traps groups are used for policing trap IDs, which are used to punt control packets to OS stack. This failure impacts packet forwarding.File a ticket and contact Cumulus Support.
ERRORfailed to open host ifc group [uint] trap id [uint] swid [uint] error [str]Failed to retrieve the file descriptor of the current open channel to the Mellanox SDK, for ifc group [uint] trap ID [uit] swid [uint], error msg [str]. The error is not recoverable.File a ticket and contact Cumulus Support.
ERRORfailed to obtain group [uint] FD for pollingFailed to retrieve the FD for a trap group [id]. The error is not recoverable.File a ticket and contact Cumulus Support.
ERRORfailed to define trap [uint] group [uint] swid [uint] error: [str]Failed to set trap ID [uint], trap group [uint], switch ID [uint], for user defined trap, error msg [str] .File a ticket and contact Cumulus Support.
ERRORfailed to set trap [uint] group [uint] swid [uint] error: [str]Failed to set trap ID [uint], trap group [uint], switch ID [uint], for user defined trap, error msg [str].File a ticket and contact Cumulus Support.
ERRORfailed to register trap [uint] swid [uint] error: [str]Failed to register trap ID [uint] in switch ID [uint] in Mellanox SDK, error msg [str].File a ticket and contact Cumulus Support.
ERRORtrap_id [uint] was not installedTrap ID [uint] was not installed in the Mellanox SDK. This would impact packet forwarding from the switch ASIC to the control plane.File a ticket and contact Cumulus Support.
ERRORtrap_id [uint] was not installedTrap ID [uint] was not installed in the Mellanox SDK. This would impact packet forwarding from the switch ASIC to the control plane.File a ticket and contact Cumulus Support.
ERRORdflt_trap_parsing_depth get failed: [str]Failed to retrieve the Mellanox Spectrum chip parsing depth from Mellanox SDK, error msg [str]. Possibly the parsing depth has not been set correctly. This would impact hardware packet forwarding.File a ticket and contact Cumulus Support.
ERRORnew_depth [uint] failed: [str]Failed to set the packet parsing depth [uint] in Mellanox SDK, error msg [str]. This failure impacts hadrware packet forwarding.File a ticket and contact Cumulus Support.
ERRORfailed to set trap [uint] group [uint] swid [uint] action [uint] error: [str]Failed to set trap ID [uint], trap group [uint], switch ID [uint], trap action. Failure would lead to the respective control packet not reaching the CPU.File a ticket and contact Cumulus Support.
ERROR[str] failed to convert trap policer attributesFailed to get the policer unit for policer group name [str]. Policer unit can be metered with unit of packets for bytes.File a ticket and contact Cumulus Support.
ERROR[str] failed to create policer: [str]Failed to create policer for policer group [str], error msg [str]. Failure to set policer would impact packet forwarding from hadrware data path to CPU.File a ticket and contact Cumulus Support.
ERROR[str] sw_rate_limiter set failed: [str]Failed to set the software rate limiter for policy group [str] in Mellanox SDK, error msg [str]. This failure could impact rate limiting for packets forwarded to CPU.File a ticket and contact Cumulus Support.
ERRORgroup [str] failed to edit policer: [str]Failed to modify policer for policer group [str], error msg [str]. Failure to set policer would impact packet forwarding from hadrware data path to CPU.File a ticket and contact Cumulus Support.
ERRORunknown trap group [uint]A trap group ID [uint] unknown to the Mellanox SDK is being used to configure the Mellanox SDK policer. This is an internal configuration error.File a ticket and contact Cumulus Support.
ERRORgroup [str] failed to bind policer %" PRIu64 “: [str]Policer group [str] with policer ID [uint64] failed to bind in the Mellanox SDK, error msg [str]. This error would impact policing of packets being forwarded from hardware to CPU.File a ticket and contact Cumulus Support.
ERRORgroup [str] failed to unbind policer %” PRIu64 “: [str]Policer group [str] with policer ID [uint64] failed to unbind in the Mellanox SDK, error msg [str]. This error would impact policing of packets being forwarded from hardware to CPU.File a ticket and contact Cumulus Support.
ERRORunsupported type [uint]Failed to create a trap counter type as the trap counter type [uint] does not match one of the well-defined ones in the Mellanox SDK. This is an internal configuration error.File a ticket and contact Cumulus Support.
ERRORunsupported type [uint]Failed to create a trap counter type as the trap counter type [uint] does not match one of the well-defined ones in Mellanox SDK. This is an internal configuration error.File a ticket and contact Cumulus Support.
ERRORtype [uint] failed: [str]Failed to retrieve the host IFC counter for the counter type [int] from the Mellanox SDK, error msg [str].File a ticket and contact Cumulus Support.
ERRORunknown meter_type [uint]Incorrect policer unit [uint] used to find out the policer group meter unit. Policer unit can be metered with unit of packets for bytes. This is an internal error.File a ticket and contact Cumulus Support.
ERRORunrecognized lid [hex]Failed to retrieve the interface key from logical port id [uint].File a ticket and contact Cumulus Support.
ERROR[str] unexpected duplicate key [uint]Failed to add an interface [str] vport with internal VLAN ID [uint] in external VLAN vport hash table because of duplicate entry [uint].File a ticket and contact Cumulus Support.
ERROR[str] int_vid [uint] ext_vid [uint]: [str]Failed to create a virtual port from logical port, interface [str], internal vlan id [uint] and external vlan id[uint], error msg [str]File a ticket and contact Cumulus Support.
ERRORUnexpected duplicate vport_lid [hex] for [str]Failed to add vport logical interface id [uint], interface [str], in vlan vport hash table because of duplicate entry [uint]File a ticket and contact Cumulus Support.
ERRORdelete failed for [str] int_vid [uint] ext_vid [uint]: [str]Failed to delete a virtual port from logical port, interface [str], internal vlan id [uint] and external vlan id [uint], error msg [str]File a ticket and contact Cumulus Support.
ERROR[str] vrid not found for table [uint]virtual router id not found in virtual id table [id] in softwareFile a ticket and contact Cumulus Support.
ERRORdelete failed for int_vid [uint] ext_vid [uint] vport_lid [hex] : [str]Failed to delete a virtual port from logical port, internal vlan id [uint], virtual port logical if [uint] and external vlan id [uint], error msg [str]File a ticket and contact Cumulus Support.
ERROR[str] vrid not found for table [uint]virtual router id not found in virtual id table [id] in softwareFile a ticket and contact Cumulus Support.
ERRORport [int] ext_vlan [int] already existsport [uint] and external vlan [uint] already exists in the e2i tableFile a ticket and contact Cumulus Support.
ERROR[str] int_vlan [int] already assigned to [str]interface [str] with internal vlan [uint] is already assigned to interface [str] in the e2i table. This is an internal configration errorFile a ticket and contact Cumulus Support.
ERRORfailed to get base bond for [str]Failed to get the bond interface for interface [str]File a ticket and contact Cumulus Support.
ERRORfailed to add to interface ht s[str]Failed to add interface [str] to the ifp hash table because an entry already existsFile a ticket and contact Cumulus Support.
ERROR[str] old_int_vlan [int] inconsistentinterface [str] with vlan [uint] is inconsistent in the e2i tableFile a ticket and contact Cumulus Support.
ERROR[str] new_int_vlan [int] already assigned to [str]interface [str] with internal vlan [uint] is already assigned to interface [str] in the e2i table. This is an internal configration errorFile a ticket and contact Cumulus Support.
ERRORUC flood block [uint] failed for [str] vlan [uint]: [str]unicast flood block [uint] failed for interface [str] for vlan id [uint], error msg [str]File a ticket and contact Cumulus Support.
ERRORlearn mode [uint] failed for [str] vlan [uint]: [str]learn mode [uint] failed for interface [str] and internal vlan [uint], error msg [str]File a ticket and contact Cumulus Support.
ERRORerror processing bridge vlan informationerror processing bridge vlan informationFile a ticket and contact Cumulus Support.
ERRORbond_mbrs_vlan_port_set failed for bond: [int]failed to set vlan for bond members for bond id [uint]File a ticket and contact Cumulus Support.
ERRORunsupported interface type: [uint]unsupported interface type [uint]File a ticket and contact Cumulus Support.
ERRORcannot find STG for bridge_vlan [uint] vid [uint]cannot find the spanning tree group for bridge vlan [uint] and vlan id [uint]File a ticket and contact Cumulus Support.
ERRORflood_mode_set failed for swid [int] vid [int]Flood mode could not be set for unregistered multicast in swid [uint] vlan id [uint]File a ticket and contact Cumulus Support.
ERRORvlans set failed for [str]: [str]setting of vlan failed for interface [str], error msg [str]File a ticket and contact Cumulus Support.
ERRORqinq mode set failed for [str]: [str]failed to set qinq mode for interface [str], error msg [str]File a ticket and contact Cumulus Support.
ERRORqinq mode set failed for [str]: [str]failed to set qinq mode for bond for interface [str], error msg [str]File a ticket and contact Cumulus Support.
ERRORunsupported interface type: [uint]unsupported interface type [uint]File a ticket and contact Cumulus Support.
ERRORbond id [uint] not fully createdbond id [uint] creation is not completeFile a ticket and contact Cumulus Support.
ERRORcannot find bridge vlan for bridge: [int]unable to find bridge vlan for the bridge id [uint]File a ticket and contact Cumulus Support.
ERRORcannot find bond vlan for bondcannot find bond vlan for the bondFile a ticket and contact Cumulus Support.
ERRORcannot allocate vlan for bond interfaceFailed to allocate vlan for bond interfaceFile a ticket and contact Cumulus Support.
ERRORcannot allocate vlan for sub-interfaceFailed to allocate vlan for sub interfaceFile a ticket and contact Cumulus Support.
ERRORgre tunnel decap entry creation failed : [str]Failed to create decapsulation entry in Mellanox SDK. Decapsulation of GRE packet woould not be operational, error msg [str]File a ticket and contact Cumulus Support.
ERRORgre tunnel decap destroy failed : [str]Failed to delete the GRE decapsulation entry in Mellanox SDK, error msg [str]File a ticket and contact Cumulus Support.
ERRORgre tunnel curr decap entry delete failed : [str]Failed to delete the GRE decapsulation entry in Mellanox SDK, error msg [str]File a ticket and contact Cumulus Support.
ERRORgre tunnel new decap entry update failed : [str]Failed to create decapsulation entry in Mellanox SDK. Decapsulation of GRE packet woould not be operational, error msg [str]File a ticket and contact Cumulus Support.
ERRORfailed to make logical gre keyFailed to form the logical GRE key from the interface information providedFile a ticket and contact Cumulus Support.
ERRORfailed to make gre decap keyFailed to form the logical decap GRE key from the information providedFile a ticket and contact Cumulus Support.
ERRORfailed to make overlay key from underlay keyFailed to create overlay gre key from underlay informationFile a ticket and contact Cumulus Support.
ERRORunable to find gre entry for tunnel id ([hex]Failed to find gre entry from tunnel id in the gre tunnel key hash table, using tunnel id [uint]File a ticket and contact Cumulus Support.
ERRORduplicate entry in overlay ht : ifindex ([int]Unable to add a duplicate gre entry with ifindex [uint] in the gre overlay hash table. A duplicate config is being attemptedFile a ticket and contact Cumulus Support.
ERRORfailed to create overlay rif : ifindex : [int] tunnel type [uint] key [uint]Unable to create an overlay router interface with ifindex [uint] , tunnel type [uint] and tunel key [uint]File a ticket and contact Cumulus Support.
ERRORgre tunnel creation failed: [str] :Failed to create tunnel id for GRE in Mellanox SDK, error msg [str]File a ticket and contact Cumulus Support.
ERRORinvalid argumentGRE update is being called with an invalid GRE information, no operation would be performedFile a ticket and contact Cumulus Support.
ERRORgre tunnel ([hex]) update failed: [str] :Failed to update tunnel id [hex] for GRE in Mellanox SDK, error msg [str]File a ticket and contact Cumulus Support.
ERRORgre tunnel destroy failed: [str]Failed to delete tunnel id for GRE in Mellanox SDK, error msg [str]File a ticket and contact Cumulus Support.
ERRORloopback rif for ifindex ([int]) : [str]Failed to add the loopback router interface, interface ifindex [uint] in Mellanox SDK, error [str]File a ticket and contact Cumulus Support.
ERRORifindex ([int]) overlay rif ([int]) : [str]Failed to delete the loopback router interface, interface ifindex [uint], overlay router interface [uint] in Mellanox SDK, error [str]File a ticket and contact Cumulus Support.
ERRORcannot allocate bridge vlan for bridge id [int]Failed to allocate bridge vlan for bridge id [uint]Check The Cumulus Linux Configuration guide
ERRORflood_mode_set failed for swid [int] vid [int]Flood mode could not be set for unregistered multicast in swid [uint] vlan id [uint]File a ticket and contact Cumulus Support.
ERRORcannot allocate ln_vlan [uint] for bridge_id [int]Failed to allocate vlan [uint] for bridge id [uint]Check The Cumulus Linux Configuration guide
ERRORflood_mode_set failed for swid [int] vid [int]Flood mode could not be set for unregistered multicast in swid [uint] vlan id [uint]File a ticket and contact Cumulus Support.
ERRORvlan [uint] not yet allocatedvlan [uint] does not exists for the bridge and is not allocatedCheck The Cumulus Linux Configuration guide
ERROR[str] bridge_id [uint] vlan [uint] port [hex] failed: [str]failed to add a unicast mac address [str] on bridge id [uint] vlan [uint] port [uint]. This could be an internal error or could be because of configuration errorFile a ticket and contact Cumulus Support.
ERROR[str] bridge_id [uint] vlan [uint] port [hex] failed: [str]failed to delete a unicast mac address [str] on bridge id [uint] vlan [uint] port [uint]. This could be an internal error or could be because of configuration errorFile a ticket and contact Cumulus Support.
ERRORnum_macs [uint] num_failed_macs [uint] delete failed: [str]failed to delete a number [uint] of unicast mac address, error msg [str]. This could be an internal error or could be because of configuration errorFile a ticket and contact Cumulus Support.
ERRORnum_macs [uint] learn set failed: [str]failed to add [uint] unicast mac addressess, error msg [str]. This could be because of resource exhaustionFile a ticket and contact Cumulus Support.
ERRORnum_macs [uint] delete failed: [str]failed to delete a number [uint] of unicast mac address, error message [str]. This could be an internal error or could be because of configuration errorFile a ticket and contact Cumulus Support.
ERRORage_time set failed [str] on swid [uint]Failed to set fdb ageing time. This would cause the mac addresses in FDB not to age mac addressFile a ticket and contact Cumulus Support.
ERRORcannot find vlan for brmac [str] vfid [uint]vlan [uint] does not exists for the bridge and so could not find the vlan for bridge mac addressCheck The Cumulus Linux Configuration guide
ERRORvfid not set for vlan [uint]failed to return a translated vlan id for vlan [uint]File a ticket and contact Cumulus Support.
ERRORnum_macs [uint] delete failed: [str]failed to delete a number [uint] of unicast mac address, error msg [str]. This could be an internal error or could be because of configuration errorFile a ticket and contact Cumulus Support.
ERRORbridge_vlan [uint] expected swid [uint] but found [uint]bridge vlan id [uint] expected switchd id [uint] for the vlan is [uint] switch idCheck The Cumulus Linux Configuration guide
ERRORnum_macs [uint] delete failed: [str]failed to delete a number [uint] of unicast mac address, error msg [str]. This could be an internal error or could be because of configuration errorFile a ticket and contact Cumulus Support.
ERRORbridge_vlan [uint] expected swid [uint] but found [uint]bridge vlan id [uint] expected switchd id [uint] for the vlan is [uint] switch idCheck The Cumulus Linux Configuration guide
ERRORget failed: [str]Failed to get fdb unicast mac address from Mellanox SDK, error msg [str]File a ticket and contact Cumulus Support.
ERRORnum_macs [uint] delete failed: [str]failed to delete a unicast mac address [str] on bridge id [uint] vlan [uint] port [uint]. This could be an internal error or could be because of configuration errorFile a ticket and contact Cumulus Support.
ERRORinternal vlans exhaustedtotal number of internal vlan has exhausted. No morevlans could be adddedCheck The Cumulus Linux Configuration guide
ERRORidentity map failed for vlan [uint]: [str]Failed to map the forwarding id to the vlan id [uint] in Mellanox SDK, error msg [str]File a ticket and contact Cumulus Support.
ERRORlearn mode_failed for vlan [uint]: [str]failed to set the learning mode for vlan id [uint], error message [str]File a ticket and contact Cumulus Support.
ERRORfailed to get members for vlan [uint]: [str]Failed to get member port for vlan [uint], error message [uint]File a ticket and contact Cumulus Support.
ERRORvlan [uint] is not an L3 vlanvlan [uint] entry is not representing a l3 interfaceCheck The Cumulus Linux Configuration guide
ERRORunsupported interface type: [uint]unsupported interface type [uint]File a ticket and contact Cumulus Support.
ERROR[hex] int_vlan [uint] failed: [str]failed to set the internal vlan [uint] for the logical port id [uint], error msg [str]Check The Cumulus Linux Configuration guide
ERROR[hex] pvid [uint] failed: [str]failed to set the logical interface [uint] to van id [uint], error msg [str]Check The Cumulus Linux Configuration guide
ERROR[hex] int_vlan [uint] failed: [str]failed to unset the internal vlan [uint] for the logical port id [uint], error msg [str]Check The Cumulus Linux Configuration guide
ERROR[hex] revert pvid: [str]failed to delete the logical interface [uint] to vlan id [uint], error msg [str]Check The Cumulus Linux Configuration guide
ERRORunsupported interface type: [uint]unsupported interface type [uint]File a ticket and contact Cumulus Support.
ERRORunsupported interface type: [uint]unsupported interface type [uint]File a ticket and contact Cumulus Support.
ERRORfailed for lid [hex] int_vlan [uint] STG [uint]: [str]Failed to set the spanning tree group for logical interface [uint], internal vlan [uint] spanning tree group [uint], error msg [%s]File a ticket and contact Cumulus Support.
ERRORunsupported if_type [uint]unsupported interface type [uint]File a ticket and contact Cumulus Support.
ERRORport [str] not establishedport interface [str] has not been established yetFile a ticket and contact Cumulus Support.
ERRORfailed for [str] lid [hex]: [str]Failed to set the port, logical id [uint], interface [str], to accept the frame type, error msg [str]File a ticket and contact Cumulus Support.
ERRORlist allocation failedfailed to allocate memory for the portsFile a ticket and contact Cumulus Support.
ERRORSTGs exhaustedTotal number of spanning tree group has exhausetd. please consult configuration manualCheck The Cumulus Linux Configuration guide
ERRORMSTP instance set failed for STG [int]: [str]Failed to set the MSTP instance for the spanning tree group [uint] in Mellanox SDK, error msg [str]Check The Cumulus Linux Configuration guide
ERRORfailed to delete STG [uint]: [str]Failed to delete the MSTP instance for the spanning tree group [uint] in Mellanox SDK, error msg [str]Check The Cumulus Linux Configuration guide
ERRORfailed to add vlan [int] to STG [int]: [str]Failed to add vlan [uint] to spanning tree group [uint] in Mellanox SDK, error msg [str]File a ticket and contact Cumulus Support.
ERRORfailed to remove vlan [int] from STG [int]: [str]Failed to delete vlan [uint] to spanning tree group [uint] in Mellanox SDK, error msg [str]File a ticket and contact Cumulus Support.
ERRORvlan [uint] not yet createdvlan [uint] does not exist and is not allocatedCheck The Cumulus Linux Configuration guide
ERRORSTG [int] not yet createdspanning tree group id [uint] is not createdFile a ticket and contact Cumulus Support.
ERRORDuplicate vfid [uint]Failed to add virtual forwarding id [uint] in hash table because of a duplicate entryFile a ticket and contact Cumulus Support.
ERRORfdb_uc_mac_addr_get failed: [str]Failed to get fdb unicast mac address from Mellanox SDK, error msg [str]File a ticket and contact Cumulus Support.
ERRORfailed to allocate mac_listFailed to allocate mac address listCheck The Cumulus Linux Configuration guide
ERRORinit set failed: [str]Initilizition of router module in Mellanox SDK failed.File a ticket and contact Cumulus Support.
ERRORhash params set failed: [str]Initilizition of router ecmp hash module in Mellanox SDK failed.File a ticket and contact Cumulus Support.
ERRORrouter #[uint] set failed: [str]Initilizition of virtual router id [uint] failed, because of error [str] in Mellanox SDK.Check The Cumulus Linux Configuration guide
ERROR[str] failed cmd [str] vlan [uint] mac [str] fwd_state [str]: [str]Routed interface description [str] failed to add/update/delete [str] with vlan [uint] mac [str] forwarding state [str]Check The Cumulus Linux Configuration guide
ERROR[str] cmd [str] failed for vlan [uint] mac [str]: [str]Routed interface description [str] failed to add/update/delete [str] with vlan [uint] mac [str] error [str]Check The Cumulus Linux Configuration guide
ERRORfailed for intf [uint]: [str]Failed to get retrieve router interface id [uint], errorstr [str]File a ticket and contact Cumulus Support.
ERRORfailed for vlan [uint] intf [uint]: [str]Failed to delete interface for vlan [uint] interface id [uint] error [str]File a ticket and contact Cumulus Support.
ERRORneigh delete all failed for intf [uint]: [str]Deletion of all the neighbor entries for the interface id [uint] error [str]File a ticket and contact Cumulus Support.
ERRORinterface state set failed for l3_intf_id [uint]: [str]Failed to set state for l3 interface id [uint] error [str]File a ticket and contact Cumulus Support.
ERRORinvalid router mac [str]check for a unicast mac address [str] failedCheck The Cumulus Linux Configuration guide
ERRORfailed for l3_intf_id [int] mac [str] vlan [uint]: [str]Failed to add mac address [str] for interface id [uint] vlan [uint] error [str]File a ticket and contact Cumulus Support.
ERRORfailed for l3_intf_id [int] mac [str] vlan [uint]: [str]Failed to delete mac address [str] for interface id [uint] vlan [uint] error [str]File a ticket and contact Cumulus Support.
ERRORInvalid table id: must be between [int] and [int]An Invalid vrf id is being tried to program, vrf id should be in range of vrf id [uint] - [uint]File a ticket and contact Cumulus Support.
ERRORcalloc failed to allocate a new ECMP entryFailed to allocate a new entry for ECMPFile a ticket and contact Cumulus Support.
ERRORunexpected duplicate SDK ecmp id [uint] (HAL ECMP id [int]Failed to add an ECMP entry id [uint] in hash table because of duplicate ECMP ID [uint]File a ticket and contact Cumulus Support.
ERRORunable to reconstruct original route [str]Failed to construct a route [str] from a hardware entry to a hardware abstraction layer entry entry, for the purpose of updating the existing entryFile a ticket and contact Cumulus Support.
ERRORunable to obtain HW info for original route [str]Failed to retrieve a route [str] from the hardware, for the purpose of updating the existing entryFile a ticket and contact Cumulus Support.
ERRORactivity get failed: [str]Failed to check the neighbor activity information, error [str]File a ticket and contact Cumulus Support.
ERRORroute [str] not found in hal_routesFailed to find the route [str] in softwareFile a ticket and contact Cumulus Support.
ERRORunexpected duplicate l3_intf_id [uint]Found duplicate l3 interface id [uint] in softwareFile a ticket and contact Cumulus Support.
ERRORunexpected duplicate RIF param [uint]Found duplicate l3 interface id [uint] parameters in softwareFile a ticket and contact Cumulus Support.
ERRORunexpected duplicate l3_intf_id [uint] vlan [uint]Found duplicate l3 interface id [uint] having vlan [uint] in softwareFile a ticket and contact Cumulus Support.
ERRORfailed for vlan [uint] l3_intf_id [uint]: [str]Failed to delete the router interface, vlan [uint] interface if [uint] in Mellanox SDK, error [str]File a ticket and contact Cumulus Support.
ERRORunexpected duplicate entryFailed to add the router interface because of duplicate entryFile a ticket and contact Cumulus Support.
ERRORvlan not found for l3_intf_id [uint]Failed retrieve l3 interface [uint] paramFile a ticket and contact Cumulus Support.
ERROR[str] vlan [uint] does not exist for bridge_id [int]vlan [uint] does not exists for the bridge id [uint]Check The Cumulus Linux Configuration guide
ERROR[str] no bridge exists for bridge_id [int]bridge id [uint] does not exists in the software databaseCheck The Cumulus Linux Configuration guide
ERROR[str] cannot allocate vlan [uint] for bridge_id [int]failed to allocate bridge id [uint] for vlan id [uint] in mellaox SDK.File a ticket and contact Cumulus Support.
ERRORinterface [str] not an sviInterface [str] type is expected to be SVI, but it is not SVIFile a ticket and contact Cumulus Support.
ERROR[str] vrid not found for table [uint]virtual router id not found in virtual id table [id] in softwareFile a ticket and contact Cumulus Support.
ERRORinvalid interface: [str]An interface check has found that the .File a ticket and contact Cumulus Support.
ERROR[str] vrid not found for table [uint]virtual router id not found in virtual id table [id] in softwareFile a ticket and contact Cumulus Support.
ERRORneighbor set failed for netdev_rif [uint]: [str]Setting up of a neighbor failed on the netdev router interface [uint]File a ticket and contact Cumulus Support.
ERRORneighbor delete failed: [str]Deletion of the neighbor entry failed, error [str]File a ticket and contact Cumulus Support.
ERRORunexpected duplicate:Addition of the interface to the software table failed because of an already existing interfaceFile a ticket and contact Cumulus Support.
ERRORFailed to get vrid for table [uint]virtual router id not found in virtual id table [id] in softwareFile a ticket and contact Cumulus Support.
ERRORFailed to get vrid for table [uint]virtual router id not found in virtual id table [id] in softwareFile a ticket and contact Cumulus Support.
ERRORroute_op [uint] neighbor route must have a valid netdev:route operation to add/del [uint] failed as the route does not have a valid next hop net deviceFile a ticket and contact Cumulus Support.
ERRORcannot find vlan_if for next hop [str]vlan interface [str] could not be found for the next hop, as the next hop programming is being done on a vlan interfaceFile a ticket and contact Cumulus Support.
ERRORcannot find parent bond infoFailed to retrieve the master bond interface descriptor for port id [uint] and vlan id [uint]File a ticket and contact Cumulus Support.
ERRORno RIF found for [str]Router interface [str] not found for neighborFile a ticket and contact Cumulus Support.
ERRORunexpected rif type [str]A router interface type [str] found and it is an invalid type of router interfaceFile a ticket and contact Cumulus Support.
ERRORneigh_get vrid [uint] failed: [str]Failed to retrieve the neighbor from the virtual router id [uint]File a ticket and contact Cumulus Support.
ERRORfailed to allocate neigh_entry_listFailed to allocate memory for a list of neighborsFile a ticket and contact Cumulus Support.
ERRORroute cmd [str] failed for vrid [int]: [str]Failed operation [str] on a unicast route on vrid [uint]File a ticket and contact Cumulus Support.
ERRORfor [str]Failed to set a unicast route [str] in Mellanox SDK.File a ticket and contact Cumulus Support.
ERRORroute delete failed for [str]: [str]Failed to delete route in route [str] in the Mellanox SDK, error msg [str]File a ticket and contact Cumulus Support.
ERRORunexpected duplicate:Found duplicate route in softwareFile a ticket and contact Cumulus Support.
ERRORunknown route type [uint]Route inspected is an unknown route type [uint], unsupported by Mellanox SDK.File a ticket and contact Cumulus Support.
ERRORECMP SDK id [uint] not foundECMP id [uint] for the route not found in the Mellanox SDK.File a ticket and contact Cumulus Support.
ERRORFailed to get vrid for table [uint]virtual router id not found in virtual id table [id] in software.File a ticket and contact Cumulus Support.
ERRORtoo many next hops [int] for hal_route [str]number of next hop [uint] exceeded the max limit for the route [str].File a ticket and contact Cumulus Support.
ERRORCannot allocate an ECMP keyFailed to allocate an ECMP key to program a new route.File a ticket and contact Cumulus Support.
ERRORFailed to get vrid for table [uint]virtual router id not found in virtual id table [id] in software.File a ticket and contact Cumulus Support.
ERRORunknown route type [uint]Route inspected is an unknown route type [uint], unsupported by Mellanox SDK.File a ticket and contact Cumulus Support.
ERRORroute get failed for prefix_type [uint]: [str]Failed to retrieve a unicast route from Mellanox SDK, error reason [str].File a ticket and contact Cumulus Support.
ERRORFailed to get table_id for vrid [uint]Failed to retrieve vritual router table id for virtual router id [uint].File a ticket and contact Cumulus Support.
ERRORsx_api_router_uc_route_get_all failed: [str]Failed to retrieve a unicast route from Mellanox SDK, error reason [str].File a ticket and contact Cumulus Support.
ERRORfailed to allocate uc_route_entry_listFailed to allocate a list for unicast route entries.File a ticket and contact Cumulus Support.
ERRORECMP hal_route_to_hw_ecmp_key failedFailed to retrieve a ecmp key for a route from Mellanox SDK.File a ticket and contact Cumulus Support.
ERRORunable to find gre entry for tunnelFailed to find a GRE tunnel entry.File a ticket and contact Cumulus Support.
ERRORunable to make logical gre key from if_keyFailed to create a logical GRE key from the interface key.File a ticket and contact Cumulus Support.
ERRORECMP route contains one or more unresolvable nexthopsECMP route has one or more unresolved next hop. So programming for the route is not performed.File a ticket and contact Cumulus Support.
ERRORecmp: can’t hold the ECMP entryECMP container NULL or invalid, so route entry programming would not be performed.File a ticket and contact Cumulus Support.
ERRORonlink host route key setup failedFailed to create onlink host route key.File a ticket and contact Cumulus Support.
ERRORonlink host route creation failedFailed to create onlink host route.File a ticket and contact Cumulus Support.
ERRORsx_api_router_ecmp_clone_set failed on parent SDK ECMP ID [int]: [str]Failed to clone ecmp route to the parent ecmpFile a ticket and contact Cumulus Support.
ERRORecmp: empty ECMP container add failed: [str]Failed to create a new and empty ecmp container with attriuts in Mellanox SDK, status msg [str].File a ticket and contact Cumulus Support.
ERRORecmp: ECMP [str] failed: [str] num_next_hops is [int].Failed to (create/update) operation [str], an ecmp container, status msg [str], with number of nexthops [uint].File a ticket and contact Cumulus Support.
ERRORunexpected duplicate ECMP keyFailed to add an ECMP key in ecmp key hash table, as a duplicate entry already exists.File a ticket and contact Cumulus Support.
ERRORunexpected duplicate ECMP SDK id [uint]Failed to add an ECMP id in ecmp id hash table, as a duplicate entry already exists.File a ticket and contact Cumulus Support.
ERRORecmp_id [uint] delete failed: [str]Failed to delete a ecmp entry, ecmp id [uint], status msg [str].File a ticket and contact Cumulus Support.
ERRORonlink host route key setup failed.Failed to create onlink host route keyFile a ticket and contact Cumulus Support.
ERRORecmp pbr refcount: can’t hold the ECMP sdkid: [int] entry.ecmp entry not found in the software while programming entries for PBR.File a ticket and contact Cumulus Support.
ERRORecmp pbr refcount: can’t put the ECMP sdkid: [int] entry.ecmp entry not found in the software while programming entries for PBR.File a ticket and contact Cumulus Support.
ERRORSDK ecmp_id [uint] failed: [str]Failed to set ecmp attributes with ecmp id [uint] in Mellanox SDK, error mesg [str].File a ticket and contact Cumulus Support.
ERRORunexpected duplicate ECMP clone ID keyFailed to add an ECMP clone id in, clone id hash table, as a duplicate entry already exists.File a ticket and contact Cumulus Support.
ERRORonlink host route not suppported on non-Spectrum backendOnlink host route not supported on non-spectrum backend.File a ticket and contact Cumulus Support.
ERRORonlink host route not suppported on non-Spectrum backendOnlink host route not supported on non-spectrum backend.File a ticket and contact Cumulus Support.
ERRORunexpected duplicate:Failed to add an ECMP entry in hash table because a duplicate entry already exists.File a ticket and contact Cumulus Support.
ERRORcannot find vlan_if for next hop [str]vlan interface [str] could not be found for the next hop, as the next hop programming is being done on a vlan interface.File a ticket and contact Cumulus Support.
ERRORinvalid rif for [str]An interface check found that routed interface [str] is invalid.File a ticket and contact Cumulus Support.
ERRORhal_clag_set_port_egress_mask failed in backend[[int]] forFailed to install egress mask on MLAG port.File a ticket with Cumulus Support.
ERRORhal_clag_set_ln_egress_mask failed in backend[[int]] forFailed to install egress mask on VXLAN device.File a ticket with Cumulus Support.
ERRORln_key [int] anycast_ip not setMLAG anycast IP is not set.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_tc_prio_map_get hal port [int] returned [str]ASIC egress queue map configuration read failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_tc_prio_map_set logical port 0x%x returned [str]ASIC egress queue map configuration write failed.File a ticket with Cumulus Support.
WARNINGhal_mlx_priority_source_trust_get HAL port [int] logical port 0x%x returned [str]ASIC priority source trust configuration read failed.File a ticket with Cumulus Support.
WARNINGhal_mlx_priority_source_trust_set HAL port [int] logical port 0x%x returned [str]ASIC priority source trust configuration write failed.File a ticket with Cumulus Support.
WARNINGhal_mlx_rewrite_enable_get HAL port [int] logical port 0x%x returned [str]ASIC priority rewrite enable configuration read failed.File a ticket with Cumulus Support.
WARNINGhal_mlx_rewrite_enable_set HAL port [int] logical port 0x%x returned [str]ASIC priority rewrite enable configuration write failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_tc_mcaware_get hal port [int] returned [str]ASIC MC buffer configuration read failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_tc_mcaware_set hal port [int] returned [str]ASIC MC buffer configuration write failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_tc_prio_map_set hal port [int] returned [str]ASIC egress queue map configuration write failed.File a ticket with Cumulus Support.
WARNINGbuffer pool [int] size 0 is invalid: this pool was not createdInvalid buffer pool size.Check back end QoS configuration file.
WARNINGPool configuration mode [int] not recognized: defaulting to buffer unitsInvalid parameter.Check back end QoS configuration file.
WARNINGsx_api_cos_shared_buff_pool_set for sw pool id [int] to size [int] (mode [int]) failed: [str],ASIC buffer pool configuration write failed.File a ticket with Cumulus Support.
WARNINGHardware buffer pool index [int] too large (max is [int])Too many buffer pools for ASIC limit.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_prio_buff_map_get failed for MLX port [int]: [str]Priority group buffer map read failed.File a ticket with Cumulus Support.
WARNINGswitch priority [int] greater than max value [int]Invalid switch priority.Check QoS configuration file.
WARNINGsx_api_cos_port_prio_buff_map_set failed for MLX port [int]: [str]ASIC packet buffer configuration write failed.File a ticket with Cumulus Support.
WARNINGreserved buffer type [int] not recognizedInvalid buffer type.File a ticket with Cumulus Support.
WARNINGcos ID [int] larger than maximum switch priority value [int]Invalid internal switch priority value.File a ticket with Cumulus Support.
WARNINGprofile element index [int] too large for array size [int]: [int] map entries, priority field [int]Priority profle index is too large for the array.File a ticket with Cumulus Support.
WARNING[str] failed for MLX port 0x%x, buffer count [int]: [str]ASIC packet buffer configuration write failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_shared_buff_pool_get failed, cannot get pool size or mode : [str]ASIC buffer pool configuration read failed.File a ticket with Cumulus Support.
WARNINGpool [int] mode [int] not recognizedInvalid buffer pool mode.File a ticket with Cumulus Support.
WARNINGMLX logical port 0x%x: cos ID [int] larger than maximum switch priority value [int]Invalid switch priority value.File a ticket with Cumulus Support.
WARNINGunlimited egress buffer for flow controlled switch priority [int]: unicast config may not match multicast config on some portsPossible buffer configuration conflict.File a ticket with Cumulus Support.
WARNINGsx_api_cos_shared_buff_pool_get failed, cannot report pool configurations: [str]ASIC buffer pool configuration read failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_pools_list_get, pool count == 0, failed: [str]Buffer pool configuration read failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_pools_list_get, pool count == [uint] failed: [str]Buffer pool configuration read failed.File a ticket with Cumulus Support.
WARNING_pool_buffer_list_get failed: [str]Buffer pool configuration read failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_shared_buff_pool_get failed, cannot report pool configurations: [str]ASIC packet buffer configuration write failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_pcpdei_to_prio_get port [int] (0x%x) returned [str]ASIC L2 priority source map get operation failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_buff_type_set failed for HAL port [int]/MLX port [int]: [str]ASIC packet buffer configuration write failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_shared_buff_type_set failed for HAL port [int]/MLX port [int]: [str]ASIC packet buffer configuration write failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_pcpdei_to_prio_set port [int] logical port 0x%x returned [str]ASIC L2 priority source map set operation failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_dscp_to_prio_get port [int] (0x%x) returned [str]ASIC L3 priority source map get operation failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_dscp_to_prio_set port [int] returned [str]ASIC L3 priority source map set operation failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_prio_to_pcpdei_rewrite_set hal port [int] element count [int]: returned [str]ASIC L2 priority remark map set operation failed.File a ticket with Cumulus Support.
WARNINGswitch priority [int] color [int] pcp [int] deci [int]failed L2 priority remark map.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_prio_to_dscp_rewrite_set hal port [int] logical_port [int] element count [int]: returned [str]ASIC L3 priority remark map set operation failed.File a ticket with Cumulus Support.
WARNINGswitch priority [int] color [int] dscp [int]failed L3 priority remark map.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_ets_element_get logical port 0x%x returned [str]ASIC scheduler configuration read failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_ets_element_set (destroy) logical port 0x%x returned [str]ASIC scheduler configuration write failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_ets_element_get hal port [int] returned [str]ASIC scheduler configuration read failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_ets_element_set logical port 0x%x level [int] index [int] returned [str]ASIC scheduler configuration write failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_ets_element_get hal port [int] returned [str]ASIC scheduler configuration read failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_ets_element_set (destroy) hal port [int] returned [str]ASIC scheduler configuration write failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_port_ets_element_set hal port [int] level [int] index [int] returned [str]ASIC scheduler configuration write failed.File a ticket with Cumulus Support.
WARNINGsx_api_port_pfc_enable_set hal port [int] returned [str]ASIC priority flow control configuration failed.File a ticket with Cumulus Support.
WARNINGswitch priority [int] is not supported for MLX unitInternal switch priority not supported.Check QoS configuration file.
WARNINGsx_api_cos_redecn_general_param_get returned [str]ASIC ECN configuration failed.File a ticket with Cumulus Support.
WARNINGhal_mlx_ecn_red_set HAL port [int] min_threshold_bytes [int] is less than minimum size, using [int] bytesinvalid parameter.Check QoS configuration file.
WARNINGhal_mlx_ecn_red_set HAL port [int] max_threshold_bytes [int] is greater than maximum size, using [int] bytesinvalid parameter.Check QoS configuration file.
WARNINGsx_api_cos_redecn_profile_set returned [str]ASIC ECN configuration failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_redecn_tc_enable_set returned [str]ASIC ECN configuration failed.File a ticket with Cumulus Support.
WARNINGsx_api_cos_redecn_profle_tc_bind_set for hal port [int] flow type [int] returned [str]ASIC ECN configuration failed.File a ticket with Cumulus Support.
WARNINGhal_sh_datapath_file_read: egress port MC buffer percent [perc] reduced to 100.0Invalid egress port MC buffer value.Check back end QoS configuration file.
WARNINGpriority group PG ID [int] is larger than the PG ID mask size [int]Invalid priority group ID value configured.Check back end QoS configuration file.
WARNINGNo priority group ID found for lossless trafficNo priority group ID found for lossless traffic.File a ticket with Cumulus Support.
WARNING_queue_info_set: port_q_count_get failed for hal port [int]Could not find port queue limits.File a ticket with Cumulus Support.
WARNINGhal_sh_datapath_packet_buffer_set: [str]Back end packet buffer config failed.Check for detailed log messages.
WARNINGunable to set FEC parameters while autoneg is enabledInvalid operation for the current port configuration.Disable auto-negotiation on the port.
WARNINGethtool settings nwords too large: [int]Invalid parameter: using default.File a ticket with Cumulus Support.
WARNING_port_group_priority_map_get: arg is NULLInvalid parameter.File a ticket with Cumulus Support.
WARNING_port_group_config_values_get: _port_group_find failed on [str] [str]Port group not found or created.File a ticket with Cumulus Support.
WARNING_port_group_set_get: [str] port set not foundPort group port set not found.Check QoS configuration file.
WARNING_port_pause_config: config_port_pause failed: [str]ASIC port pause configuration failed.File a ticket with Cumulus Support.
WARNING_priority_flow_control_config: hal_port_pfc_set failed on hal port [int]: [str]ASIC priority flow control configuration failed.File a ticket with Cumulus Support.
WARNING_config_port_packet_buffers: [str]ASIC packet buffer config failed.File a ticket with Cumulus Support.
WARNING_switch_priority_config: hal port [int]: [str]_switch_priority_config: hal port [int]: [str]File a ticket with Cumulus Support.
WARNING_config_port_packet_buffers: [str]ASIC packet buffer config failed.File a ticket with Cumulus Support.
WARNING_priority_map_config: priority map direction [int] is larger then max value HAL_DATAPATH_PRIORITY_DIRECTION_MAXInvalid parameter.File a ticket with Cumulus Support.
WARNING_priority_map_config: packet priority field [int] not supportedInvalid packet priority field(s).Check QoS configuration file.
WARNING_hash_config: route_ecmp_max_paths_set failed: [str]ASIC ECMP configuration failed.File a ticket with Cumulus Support.
WARNING_hash_config: hash config failed: [str]ASIC symmetric hash configuration failed.File a ticket with Cumulus Support.
WARNING_hash_config: ecmp hash seed config faild: [str]ASIC ECMP hash configuration failed.File a ticket with Cumulus Support.
WARNING_hash_config: hash config failed: [str]ASIC resilient hash configuration failed.File a ticket with Cumulus Support.
WARNING_mpls_config: mpls enable config failed: [str]ASIC MPLS configuration failed.File a ticket with Cumulus Support.
WARNING_ecn_red_config: hal_datapath_ecn_red_set failed on hal port [int]: [str]ASIC ECN/RED configuration failed.File a ticket with Cumulus Support.
WARNING_port_attribute_mark: flow control configuration conflict on hal port [int]:Flow control configuration conflict.Check QoS configuration file.
WARNINGhal_datapath_forwarding_profile_get: forwarding table profile path was NULLMemory allocation failed.File a ticket with Cumulus Support.
WARNINGhal_datapath_forwarding_profile_get: sfs_config_get failed for [str]Missing forwarding table profile configuration.Check QoS configuration file.
WARNINGhal_datapath_init: packet priority source mapping configuration failedPacket priority source map configuration failed.Check for detailed log messages.
WARNINGhal_datapath_init: packet priority remark configuration failedPacket priority remark map configuration failed.Check for detailed log messages.
WARNING_config_value_read: sfs path is nullInvalid parameter.File a ticket with Cumulus Support.
WARNING_config_value_read: sfs_config_get [str] failedConfiguration parameter not found.File a ticket with Cumulus Support.
WARNING_config_value_read: sfs_config_get [str] returned NULL configurationConfiguration value not found.File a ticket with Cumulus Support.
WARNING_cos_show_node_create: sfs_add failed for CoS nodeswitchd fuse node create failed.File a ticket with Cumulus Support.
WARNING_priority_map_get: remark list has more than one packet priority value: configuring the first valueIgnoring surplus remark values.Check QoS configuration file.
WARNING_priority_map_list_get: [str]ASIC priority profile create failed.File a ticket with Cumulus Support.
WARNING_switch_priority_config_values_get: scheduling algorithm [str] not recognizedInvalid scheduling algorithm.Check QoS configuration file.
WARNINGhal_list_get: list type [int] is not supportedInvalid list type.File a ticket with Cumulus Support.
WARNINGCouldn’t read a random number [int] setting seed to [uint]No ECMP hash seed found in file.Check file or accept default random seed.
WARNINGCouldn’t read a random number [int] setting seed1 to [uint]No ECMP hash seed1 found in file.Check file or accept default random seed.
WARNINGNeighbor entry is not IPv4 or v6: [int]!Netlink neighbor object has invalid family.File a ticket with Cumulus Support.
WARNINGNeighbor entry had unexpected flags [int]Netlink neighbor object has unsupported flags.File a ticket with Cumulus Support.
WARNING[str]: route table mode [int] not supportedInvalid route table ASIC mode.File a ticket with Cumulus Support.
WARNING[str]: host table mode [int] not supportedInvalid neighbor table ASIC mode.File a ticket with Cumulus Support.
WARNINGRoute [[str]] is not IPv4 or v6 or MPLS, family: [int]Netlink route object has invalid family.File a ticket with Cumulus Support.
WARNINGRoute [[str]] has unexpected flags: [int]Netlink route object has unsupported flags.File a ticket with Cumulus Support.
WARNINGRoute [[str]] has unexpected type: [int]Netlink route object has unsupported type.File a ticket with Cumulus Support.
WARNINGRoute [[str]] has unexpected tos: [int]Netlink route object has unsupported TOS value.File a ticket with Cumulus Support.
WARNINGRoute [[str]] has non-NULL src.Netlink route object has non-NULL source.File a ticket with Cumulus Support.
WARNINGRoute [[str]] has non-zero iif: [int]Netlink route object has non-NULL interface.File a ticket with Cumulus Support.
WARNING[int] routes exceeded [int] ecmp NHs, and were truncated.Routes exceeded per-route nexthop limit.Modify route next-hop configuration.
WARNING[int] routes reverted to non-ECMP due to NH tableTotal number of nexthops did not fit in hardware table.Modify route next-hop configuration.
WARNING[str]: route table mode [int] not supportedHardware route table is set to an incorrect mode.File a ticket with Cumulus Support.
WARNING[str]: host table mode [int] not supportedHardware host table is set to an incorrect mode.File a ticket with Cumulus Support.
WARNINGvpn_id 0x%x for ln_type [uint] ln_key [uint] tunnel_id 0x%x invalid local_ip [str]Local IP for a tunnel is invalid.File a ticket with Cumulus Support.
WARNINGError removing isolated port [int] from [int]. Error: [str]Removing isolated VPN port from the SDK failed.File a ticket with Cumulus Support.
WARNINGError adding isolated port [int] to [int]. Error: [str]Adding isolated VPN port to the SDK failed.File a ticket with Cumulus Support.
WARNINGError removing isolated port [int] from [int].Moving isolated VPN port from the SDK failed.File a ticket with Cumulus Support.
WARNING[str]: failed to push port settings to hal. err = [int]table_id could not be set for a port.File a ticket with Cumulus Support.
WARNING[str] not found in grp [str], bridge [int]A port not found in the given group for the specific bridge.File a ticket with Cumulus Support.
WARNINGgrp [str] not found in bridge [int]During deletion, an MDB group was not found for a specific bridge.File a ticket with Cumulus Support.
WARNINGlid 0x%x cannot be both SPAN sourceACL: SPAN source and target cannot be the same.Remove the rule.
WARNINGCPU not supported as mirror portACL: Mirror target port cannot be CPU.Remove these SPAN rules.
WARNINGtable [str] [str] chain [str] L2 header field match not supported with IPv6 keyACL: Specified match unsupported.Remove the rule.
WARNINGtable [str] [str] chain [str] IP TTL not supported with MAC+IPv4 keyACL: Unsupported match.Remove the rule.
WARNINGtable [str] [str] chain [str] requires hardware IPv6 rule format but platform does not support MAC+IPv6 key combinationACL: Unsupported match.Remove the rule.
WARNINGtable [str] [str] chain [str] requires hardware IPv4 rule but platform does not support IPv4 key withACL: Unsupported match.Remove the rule.
WARNINGlogical network type not supportedACL: Unsupported interface type in internal VXLAN rules.File a ticket with Cumulus Support.
WARNINGDetected excessive moves of mac address [str] on bridge [str], last seen on [str] and [str].L2: Too many MAC moves seen.Check network topology for loops or intrusion.
WARNINGMemory allocation failedMemory exhausted.File a ticket with Cumulus Support.
WARNINGCan’t open configuration file [str]: [int]Failed to read configuration file in SFS.File a ticket with Cumulus Support.
WARNINGtx failed with count [int], start %pFailed to transfer packets in NIC.File a ticket with Cumulus Support.
WARNINGDetected excessive moves of mac address [str] on bridge [str],Moved MAC addresses over threshold.
WARNINGUnsupported command [str]Wrong FEC command.File a ticket with Cumulus Support.
WARNINGgenl_talk returned error for ifindex [int] ([str])Failed to read cached settings in PORT.File a ticket with Cumulus Support.
WARNINGnew tag_state [str] mismatches with [str] for [str] int_vlan [uint]The new configured tag state [str] mismatches with the old tag state [str] for the internal VLAN [id].File a ticket and contact Cumulus Support.
WARNINGverbosity level for SDK module [uint] not presentincorrect verbosity level for the Mellanox SDK module is being configured. This is an internal error.File a ticket and contact Cumulus Support.
WARNINGlegacy SX2 nexthop route type [uint] not handled.for Legacy Mellanox SX2 chip, next hop of route type [uint] not handled.File a ticket and contact Cumulus Support.
WARNINGhash_table_delete of clone parent from id_ht %p failed.Failed to delete an ECMP clone id in, clone id hash table, as a entry does not exists.File a ticket and contact Cumulus Support.
WARNING[str]: no parent for [str]Missing parent interface.File a ticket with Cumulus Support.
WARNING[str]: no parent for [str]Missing parent interface.File a ticket with Cumulus Support.