OSPF Configuration Example
This section shows an OSPF configuration example based on the reference topology.
The example configuration configures:
- OSPFv2 unnumbered on all leafs and spines
- MLAG on leaf01 and leaf02, and on border01 and border02
- leaf01, leaf02, spine01, and spine02 in area 0
- border01 and border02 (ABRs) in area 0 and area 1
cumulus@leaf01:~$ nv set interface lo ip address 10.10.10.1/32
cumulus@leaf01:~$ nv set interface swp51 ip address 10.10.10.1/32
cumulus@leaf01:~$ nv set interface swp52 ip address 10.10.10.1/32
cumulus@leaf01:~$ nv set interface bond1 bond member swp1
cumulus@leaf01:~$ nv set interface bond2 bond member swp2
cumulus@leaf01:~$ nv set interface bond3 bond member swp3
cumulus@leaf01:~$ nv set interface bond1 bond mlag id 1
cumulus@leaf01:~$ nv set interface bond2 bond mlag id 2
cumulus@leaf01:~$ nv set interface bond3 bond mlag id 3
cumulus@leaf01:~$ nv set interface bond1 bond lacp-bypass on
cumulus@leaf01:~$ nv set interface bond2 bond lacp-bypass on
cumulus@leaf01:~$ nv set interface bond3 bond lacp-bypass on
cumulus@leaf01:~$ nv set interface bond1-3 bridge domain br_default
cumulus@leaf01:~$ nv set interface peerlink bond member swp49-50
cumulus@leaf01:~$ nv set mlag mac-address 44:38:39:FF:00:AA
cumulus@leaf01:~$ nv set mlag backup 10.10.10.2
cumulus@leaf01:~$ nv set mlag peer-ip linklocal
cumulus@leaf01:~$ nv set interface vlan10 ip address 10.1.10.2/24
cumulus@leaf01:~$ nv set interface vlan20 ip address 10.1.20.2/24
cumulus@leaf01:~$ nv set interface vlan30 ip address 10.1.30.2/24
cumulus@leaf01:~$ nv set interface vlan10 ipv4 vrr address 10.1.10.1/24
cumulus@leaf01:~$ nv set interface vlan10 ipv6 vrr mac-address 00:00:5e:00:01:00
cumulus@leaf01:~$ nv set interface vlan10 ipv4 vrr state enabled
cumulus@leaf01:~$ nv set interface vlan20 ipv4 vrr address 10.1.20.1/24
cumulus@leaf01:~$ nv set interface vlan20 ipv4 vrr mac-address 00:00:5e:00:01:00
cumulus@leaf01:~$ nv set interface vlan20 ipv4 vrr state enabled
cumulus@leaf01:~$ nv set interface vlan30 ipv4 vrr address 10.1.30.1/24
cumulus@leaf01:~$ nv set interface vlan30 ipv4 vrr mac-address 00:00:5e:00:01:00
cumulus@leaf01:~$ nv set interface vlan30 ipv4 vrr state enabled
cumulus@leaf01:~$ nv set bridge domain br_default vlan 10,20,30
cumulus@leaf01:~$ nv set bridge domain br_default untagged 1
cumulus@leaf01:~$ nv set interface bond1 bridge domain br_default access 10
cumulus@leaf01:~$ nv set interface bond2 bridge domain br_default access 20
cumulus@leaf01:~$ nv set interface bond3 bridge domain br_default access 30
cumulus@leaf01:~$ nv set vrf default router ospf router-id 10.10.10.1
cumulus@leaf01:~$ nv set interface lo router ospf area 0
cumulus@leaf01:~$ nv set interface swp51 router ospf area 0
cumulus@leaf01:~$ nv set interface swp52 router ospf area 0
cumulus@leaf01:~$ nv set interface swp51 router ospf network-type point-to-point
cumulus@leaf01:~$ nv set interface swp52 router ospf network-type point-to-point
cumulus@leaf01:~$ nv set interface swp51 router ospf timers hello-interval 5
cumulus@leaf01:~$ nv set interface swp51 router ospf timers dead-interval 60
cumulus@leaf01:~$ nv set interface swp52 router ospf timers hello-interval 5
cumulus@leaf01:~$ nv set interface swp52 router ospf timers dead-interval 60
cumulus@leaf01:~$ nv set interface vlan10 router ospf area 0
cumulus@leaf01:~$ nv set interface vlan20 router ospf area 0
cumulus@leaf01:~$ nv set interface vlan30 router ospf area 0
cumulus@leaf01:~$ nv set interface vlan10 router ospf passive on
cumulus@leaf01:~$ nv set interface vlan20 router ospf passive on
cumulus@leaf01:~$ nv set interface vlan30 router ospf passive on
cumulus@leaf01:~$ nv set router ospf timers spf delay 80
cumulus@leaf01:~$ nv set router ospf timers spf holdtime 100
cumulus@leaf01:~$ nv set router ospf timers spf max-holdtime 6000
cumulus@leaf01:~$ nv config apply
cumulus@leaf02:~$ nv set interface lo ip address 10.10.10.2/32
cumulus@leaf02:~$ nv set interface swp51 ip address 10.10.10.2/32
cumulus@leaf02:~$ nv set interface swp52 ip address 10.10.10.2/32
cumulus@leaf02:~$ nv set interface bond1 bond member swp1
cumulus@leaf02:~$ nv set interface bond2 bond member swp2
cumulus@leaf02:~$ nv set interface bond3 bond member swp3
cumulus@leaf02:~$ nv set interface bond1 bond mlag id 1
cumulus@leaf02:~$ nv set interface bond2 bond mlag id 2
cumulus@leaf02:~$ nv set interface bond3 bond mlag id 3
cumulus@leaf02:~$ nv set interface bond1 bond lacp-bypass on
cumulus@leaf02:~$ nv set interface bond2 bond lacp-bypass on
cumulus@leaf02:~$ nv set interface bond3 bond lacp-bypass on
cumulus@leaf02:~$ nv set interface bond1-3 bridge domain br_default
cumulus@leaf02:~$ nv set interface peerlink bond member swp49-50
cumulus@leaf02:~$ nv set mlag mac-address 44:38:39:FF:00:AA
cumulus@leaf02:~$ nv set mlag backup 10.10.10.1
cumulus@leaf02:~$ nv set mlag peer-ip linklocal
cumulus@leaf02:~$ nv set interface vlan10 ip address 10.1.10.3/24
cumulus@leaf02:~$ nv set interface vlan20 ip address 10.1.20.3/24
cumulus@leaf02:~$ nv set interface vlan30 ip address 10.1.30.3/24
cumulus@leaf02:~$ nv set interface vlan10 ipv4 vrr address 10.1.10.1/24
cumulus@leaf02:~$ nv set interface vlan10 ipv4 vrr mac-address 00:00:5e:00:01:00
cumulus@leaf02:~$ nv set interface vlan10 ipv4 vrr state enabled
cumulus@leaf02:~$ nv set interface vlan20 ipv4 vrr address 10.1.20.1/24
cumulus@leaf02:~$ nv set interface vlan20 ipv4 vrr mac-address 00:00:5e:00:01:00
cumulus@leaf02:~$ nv set interface vlan20 ipv4 vrr state enabled
cumulus@leaf02:~$ nv set interface vlan30 ipv4 vrr address 10.1.30.1/24
cumulus@leaf02:~$ nv set interface vlan30 ipv4 vrr mac-address 00:00:5e:00:01:00
cumulus@leaf02:~$ nv set interface vlan30 ipv4 vrr state enabled
cumulus@leaf02:~$ nv set bridge domain br_default vlan 10,20,30
cumulus@leaf02:~$ nv set bridge domain br_default untagged 1
cumulus@leaf02:~$ nv set interface bond1 bridge domain br_default access 10
cumulus@leaf02:~$ nv set interface bond2 bridge domain br_default access 20
cumulus@leaf02:~$ nv set interface bond3 bridge domain br_default access 30
cumulus@leaf02:~$ nv set vrf default router ospf router-id 10.10.10.2
cumulus@leaf02:~$ nv set interface lo router ospf area 0
cumulus@leaf02:~$ nv set interface swp51 router ospf area 0
cumulus@leaf02:~$ nv set interface swp52 router ospf area 0
cumulus@leaf02:~$ nv set interface swp51 router ospf network-type point-to-point
cumulus@leaf02:~$ nv set interface swp52 router ospf network-type point-to-point
cumulus@leaf02:~$ nv set interface swp51 router ospf timers hello-interval 5
cumulus@leaf02:~$ nv set interface swp51 router ospf timers dead-interval 60
cumulus@leaf02:~$ nv set interface swp52 router ospf timers hello-interval 5
cumulus@leaf02:~$ nv set interface swp52 router ospf timers dead-interval 60
cumulus@leaf02:~$ nv set interface vlan10 router ospf area 0
cumulus@leaf02:~$ nv set interface vlan20 router ospf area 0
cumulus@leaf02:~$ nv set interface vlan30 router ospf area 0
cumulus@leaf02:~$ nv set interface vlan10 router ospf passive on
cumulus@leaf02:~$ nv set interface vlan20 router ospf passive on
cumulus@leaf02:~$ nv set interface vlan30 router ospf passive on
cumulus@leaf02:~$ nv set router ospf timers spf delay 80
cumulus@leaf02:~$ nv set router ospf timers spf holdtime 100
cumulus@leaf02:~$ nv set router ospf timers spf max-holdtime 6000
cumulus@leaf02:~$ nv config apply
cumulus@spine01:~$ nv set interface lo ip address 10.10.10.101/32
cumulus@spine01:~$ nv set interface swp1 ip address 10.10.10.101/32
cumulus@spine01:~$ nv set interface swp2 ip address 10.10.10.101/32
cumulus@spine01:~$ nv set interface swp5 ip address 10.10.10.101/32
cumulus@spine01:~$ nv set interface swp6 ip address 10.10.10.101/32
cumulus@spine01:~$ nv set vrf default router ospf router-id 10.10.10.101
cumulus@spine01:~$ nv set interface lo router ospf area 0
cumulus@spine01:~$ nv set interface swp1 router ospf area 0
cumulus@spine01:~$ nv set interface swp1 router ospf network-type point-to-point
cumulus@spine01:~$ nv set interface swp1 router ospf timers hello-interval 5
cumulus@spine01:~$ nv set interface swp1 router ospf timers dead-interval 60
cumulus@spine01:~$ nv set interface swp2 router ospf area 0
cumulus@spine01:~$ nv set interface swp2 router ospf network-type point-to-point
cumulus@spine01:~$ nv set interface swp2 router ospf timers hello-interval 5
cumulus@spine01:~$ nv set interface swp2 router ospf timers dead-interval 60
cumulus@spine01:~$ nv set interface swp5 router ospf area 0
cumulus@spine01:~$ nv set interface swp5 router ospf network-type point-to-point
cumulus@spine01:~$ nv set interface swp5 router ospf timers hello-interval 5
cumulus@spine01:~$ nv set interface swp5 router ospf timers dead-interval 60
cumulus@spine01:~$ nv set interface swp6 router ospf area 0
cumulus@spine01:~$ nv set interface swp6 router ospf network-type point-to-point
cumulus@spine01:~$ nv set interface swp6 router ospf timers hello-interval 5
cumulus@spine01:~$ nv set interface swp6 router ospf timers dead-interval 60
cumulus@spine01:~$ nv set router ospf timers spf max-holdtime 6000
cumulus@spine01:~$ nv set router ospf timers spf holdtime 100
cumulus@spine01:~$ nv set router ospf timers spf max-holdtime 6000
cumulus@spine01:~$ nv config apply
cumulus@spine02:~$ nv set interface lo ip address 10.10.10.102/32
cumulus@spine02:~$ nv set interface swp1 ip address 10.10.10.102/32
cumulus@spine02:~$ nv set interface swp2 ip address 10.10.10.102/32
cumulus@spine02:~$ nv set interface swp5 ip address 10.10.10.102/32
cumulus@spine02:~$ nv set interface swp6 ip address 10.10.10.102/32
cumulus@spine02:~$ nv set vrf default router ospf router-id 10.10.10.102
cumulus@spine02:~$ nv set interface lo router ospf area 0
cumulus@spine02:~$ nv set interface swp1 router ospf area 0
cumulus@spine02:~$ nv set interface swp1 router ospf network-type point-to-point
cumulus@spine02:~$ nv set interface swp1 router ospf timers hello-interval 5
cumulus@spine02:~$ nv set interface swp1 router ospf timers dead-interval 60
cumulus@spine02:~$ nv set interface swp2 router ospf area 0
cumulus@spine02:~$ nv set interface swp2 router ospf network-type point-to-point
cumulus@spine02:~$ nv set interface swp2 router ospf timers hello-interval 5
cumulus@spine02:~$ nv set interface swp2 router ospf timers dead-interval 60
cumulus@spine02:~$ nv set interface swp5 router ospf area 0
cumulus@spine02:~$ nv set interface swp5 router ospf network-type point-to-point
cumulus@spine02:~$ nv set interface swp5 router ospf timers hello-interval 5
cumulus@spine02:~$ nv set interface swp5 router ospf timers dead-interval 60
cumulus@spine02:~$ nv set interface swp6 router ospf area 0
cumulus@spine02:~$ nv set interface swp6 router ospf network-type point-to-point
cumulus@spine02:~$ nv set interface swp6 router ospf timers hello-interval 5
cumulus@spine02:~$ nv set interface swp6 router ospf timers dead-interval 60
cumulus@spine02:~$ nv set router ospf timers spf max-holdtime 6000
cumulus@spine02:~$ nv set router ospf timers spf holdtime 100
cumulus@spine02:~$ nv set router ospf timers spf max-holdtime 6000
cumulus@spine02:~$ nv config apply
cumulus@border01:~$ nv set interface lo ip address 10.10.10.63/32
cumulus@border01:~$ nv set interface swp51 ip address 10.10.10.63/32
cumulus@border01:~$ nv set interface swp52 ip address 10.10.10.63/32
cumulus@border01:~$ nv set interface bond1 bond member swp1
cumulus@border01:~$ nv set interface bond2 bond member swp2
cumulus@border01:~$ nv set interface bond1 bond mlag id 1
cumulus@border01:~$ nv set interface bond2 bond mlag id 2
cumulus@border01:~$ nv set interface bond1 bond lacp-bypass on
cumulus@border01:~$ nv set interface bond2 bond lacp-bypass on
cumulus@border01:~$ nv set interface bond1 bridge domain br_default access 2001
cumulus@border01:~$ nv set interface bond2 bridge domain br_default access 2001
cumulus@border01:~$ nv set interface bond1-2 bridge domain br_default
cumulus@border01:~$ nv set interface vlan2001
cumulus@border01:~$ nv set interface vlan2001 ip address 10.1.201.2/24
cumulus@border01:~$ nv set interface vlan2001 ipv4 vrr address 10.1.201.1/24
cumulus@border01:~$ nv set interface vlan2001 ipv4 vrr mac-address 00:00:5e:00:01:00
cumulus@border01:~$ nv set interface vlan2001 ipv4 vrr state enabled
cumulus@border01:~$ nv set interface peerlink bond member swp49-50
cumulus@border01:~$ nv set mlag mac-address 44:38:39:FF:00:FF
cumulus@border01:~$ nv set mlag backup 10.10.10.64
cumulus@border01:~$ nv set mlag peer-ip linklocal
cumulus@border01:~$ nv set bridge domain br_default untagged 1
cumulus@border01:~$ nv set vrf default router ospf router-id 10.10.10.63
cumulus@border01:~$ nv set interface lo router ospf area 0
cumulus@border01:~$ nv set interface swp51 router ospf area 0
cumulus@border01:~$ nv set interface swp51 router ospf network-type point-to-point
cumulus@border01:~$ nv set interface swp51 router ospf timers hello-interval 5
cumulus@border01:~$ nv set interface swp51 router ospf timers dead-interval 60
cumulus@border01:~$ nv set interface swp52 router ospf area 0
cumulus@border01:~$ nv set interface swp52 router ospf network-type point-to-point
cumulus@border01:~$ nv set interface swp52 router ospf timers hello-interval 5
cumulus@border01:~$ nv set interface swp52 router ospf timers dead-interval 60
cumulus@border01:~$ nv set interface vlan2001 router ospf area 1
cumulus@border01:~$ nv set router ospf timers spf max-holdtime 6000
cumulus@border01:~$ nv set router ospf timers spf holdtime 100
cumulus@border01:~$ nv set router ospf timers spf max-holdtime 6000
cumulus@border01:~$ nv config apply
cumulus@border02:~$ nv set interface lo ip address 10.10.10.64/32
cumulus@border02:~$ nv set interface swp51 ip address 10.10.10.64/32
cumulus@border02:~$ nv set interface swp52 ip address 10.10.10.64/32
cumulus@border02:~$ nv set interface bond1 bond member swp1
cumulus@border02:~$ nv set interface bond2 bond member swp2
cumulus@border02:~$ nv set interface bond1 bond mlag id 1
cumulus@border02:~$ nv set interface bond2 bond mlag id 2
cumulus@border02:~$ nv set interface bond1 bond lacp-bypass on
cumulus@border02:~$ nv set interface bond2 bond lacp-bypass on
cumulus@border02:~$ nv set interface bond1 bridge domain br_default access 2001
cumulus@border02:~$ nv set interface bond2 bridge domain br_default access 2001
cumulus@border02:~$ nv set interface bond1-2 bridge domain br_default
cumulus@border02:~$ nv set interface vlan2001
cumulus@border02:~$ nv set interface vlan2001 ip address 10.1.201.3/24
cumulus@border02:~$ nv set interface vlan2001 ipv4 vrr address 10.1.201.1/24
cumulus@border02:~$ nv set interface vlan2001 ipv4 vrr mac-address 00:00:5e:00:01:00
cumulus@border02:~$ nv set interface vlan2001 ipv4 vrr state enabled
cumulus@border02:~$ nv set interface peerlink bond member swp49-50
cumulus@border02:~$ nv set mlag mac-address 44:38:39:FF:00:FF
cumulus@border02:~$ nv set mlag backup 10.10.10.63
cumulus@border02:~$ nv set mlag peer-ip linklocal
cumulus@border02:~$ nv set bridge domain br_default untagged 1
cumulus@border02:~$ nv set vrf default router ospf router-id 10.10.10.64
cumulus@border02:~$ nv set interface lo router ospf area 0
cumulus@border02:~$ nv set interface swp51 router ospf area 0
cumulus@border02:~$ nv set interface swp51 router ospf network-type point-to-point
cumulus@border02:~$ nv set interface swp51 router ospf timers hello-interval 5
cumulus@border02:~$ nv set interface swp51 router ospf timers dead-interval 60
cumulus@border02:~$ nv set interface swp52 router ospf area 0
cumulus@border02:~$ nv set interface swp52 router ospf network-type point-to-point
cumulus@border02:~$ nv set interface swp52 router ospf timers hello-interval 5
cumulus@border02:~$ nv set interface swp52 router ospf timers dead-interval 60
cumulus@border02:~$ nv set interface vlan2001 router ospf area 1
cumulus@border02:~$ nv set router ospf timers spf max-holdtime 6000
cumulus@border02:~$ nv set router ospf timers spf holdtime 100
cumulus@border02:~$ nv set router ospf timers spf max-holdtime 6000
cumulus@border02:~$ nv config apply
cumulus@leaf01:mgmt:~$ sudo cat /etc/nvue.d/startup.yaml
- set:
bridge:
domain:
br_default:
untagged: 1
vlan:
10,20,30: {}
interface:
bond1:
bond:
lacp-bypass: on
member:
swp1: {}
mlag:
enable: on
id: 1
bridge:
domain:
br_default:
access: 10
type: bond
bond2:
bond:
lacp-bypass: on
member:
swp2: {}
mlag:
enable: on
id: 2
bridge:
domain:
br_default:
access: 20
type: bond
bond3:
bond:
lacp-bypass: on
member:
swp3: {}
mlag:
enable: on
id: 3
bridge:
domain:
br_default:
access: 30
type: bond
eth0:
ip:
address:
dhcp: {}
vrf: mgmt
type: eth
lo:
ip:
address:
10.10.10.1/32: {}
type: loopback
peerlink:
bond:
member:
swp49: {}
swp50: {}
type: peerlink
peerlink.4094:
base-interface: peerlink
type: sub
vlan: 4094
swp51:
ip:
address:
10.10.10.1/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
swp52:
ip:
address:
10.10.10.1/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
vlan10:
ip:
address:
10.1.10.2/24: {}
vrr:
address:
10.1.10.1/24: {}
enable: on
mac-address: 00:00:5e:00:01:00
state:
up: {}
router:
ospf:
area: 0
enable: on
passive: on
type: svi
vlan: 10
vlan20:
ip:
address:
10.1.20.2/24: {}
vrr:
address:
10.1.20.1/24: {}
enable: on
mac-address: 00:00:5e:00:01:00
state:
up: {}
router:
ospf:
area: 0
enable: on
passive: on
type: svi
vlan: 20
vlan30:
ip:
address:
10.1.30.2/24: {}
vrr:
address:
10.1.30.1/24: {}
enable: on
mac-address: 00:00:5e:00:01:00
state:
up: {}
router:
ospf:
area: 0
enable: on
passive: on
type: svi
vlan: 30
mlag:
backup:
10.10.10.2: {}
enable: on
init-delay: 5
mac-address: 44:38:39:FF:00:AA
peer-ip: linklocal
router:
ospf:
enable: on
timers:
spf:
delay: 80
holdtime: 100
max-holdtime: 6000
vrr:
enable: on
service:
ntp:
mgmt:
server:
0.cumulusnetworks.pool.ntp.org: {}
1.cumulusnetworks.pool.ntp.org: {}
2.cumulusnetworks.pool.ntp.org: {}
3.cumulusnetworks.pool.ntp.org: {}
system:
aaa:
class:
nvapply:
action: allow
command-path:
/:
permission: all
nvshow:
action: allow
command-path:
/:
permission: ro
sudo:
action: allow
command-path:
/:
permission: all
role:
nvue-admin:
class:
nvapply: {}
nvue-monitor:
class:
nvshow: {}
system-admin:
class:
nvapply: {}
sudo: {}
user:
cumulus:
full-name: cumulus,,,
hashed-password: $6$LVtX8JO1GJbiiVfq$Lqn/7MDaxbfgkKbDETAB.2sPuqvXJxGFnldbuJqMUBqczlMM1nNTrV5Kld7KwBvAkky6vJlQziYPqJS/ge88n.
role: system-admin
api:
state: enabled
config:
auto-save:
enable: on
control-plane:
acl:
acl-default-dos:
inbound: {}
acl-default-whitelist:
inbound: {}
global:
system-mac: 44:38:39:22:01:7a
hostname: leaf01
reboot:
mode: cold
ssh-server:
state: enabled
wjh:
channel:
forwarding:
trigger:
l2: {}
l3: {}
tunnel: {}
enable: on
vrf:
default:
router:
ospf:
area:
'0':
network:
10.10.10.1/32: {}
enable: on
router-id: 10.10.10.1
cumulus@leaf02:mgmt:~$ sudo cat /etc/nvue.d/startup.yaml
- set:
bridge:
domain:
br_default:
untagged: 1
vlan:
10,20,30: {}
interface:
bond1:
bond:
lacp-bypass: on
member:
swp1: {}
mlag:
enable: on
id: 1
bridge:
domain:
br_default:
access: 10
type: bond
bond2:
bond:
lacp-bypass: on
member:
swp2: {}
mlag:
enable: on
id: 2
bridge:
domain:
br_default:
access: 20
type: bond
bond3:
bond:
lacp-bypass: on
member:
swp3: {}
mlag:
enable: on
id: 3
bridge:
domain:
br_default:
access: 30
type: bond
eth0:
ip:
address:
dhcp: {}
vrf: mgmt
type: eth
lo:
ip:
address:
10.10.10.2/32: {}
type: loopback
peerlink:
bond:
member:
swp49: {}
swp50: {}
type: peerlink
peerlink.4094:
base-interface: peerlink
type: sub
vlan: 4094
swp51:
ip:
address:
10.10.10.2/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
swp52:
ip:
address:
10.10.10.2/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
vlan10:
ip:
address:
10.1.10.3/24: {}
vrr:
address:
10.1.10.1/24: {}
enable: on
mac-address: 00:00:5e:00:01:00
state:
up: {}
router:
ospf:
area: 0
enable: on
passive: on
type: svi
vlan: 10
vlan20:
ip:
address:
10.1.20.3/24: {}
vrr:
address:
10.1.20.1/24: {}
enable: on
mac-address: 00:00:5e:00:01:00
state:
up: {}
router:
ospf:
area: 0
enable: on
passive: on
type: svi
vlan: 20
vlan30:
ip:
address:
10.1.30.3/24: {}
vrr:
address:
10.1.30.1/24: {}
enable: on
mac-address: 00:00:5e:00:01:00
state:
up: {}
router:
ospf:
area: 0
enable: on
passive: on
type: svi
vlan: 30
mlag:
backup:
10.10.10.1: {}
enable: on
init-delay: 5
mac-address: 44:38:39:FF:00:AA
peer-ip: linklocal
router:
ospf:
enable: on
timers:
spf:
delay: 80
holdtime: 100
max-holdtime: 6000
vrr:
enable: on
service:
ntp:
mgmt:
server:
0.cumulusnetworks.pool.ntp.org: {}
1.cumulusnetworks.pool.ntp.org: {}
2.cumulusnetworks.pool.ntp.org: {}
3.cumulusnetworks.pool.ntp.org: {}
system:
aaa:
class:
nvapply:
action: allow
command-path:
/:
permission: all
nvshow:
action: allow
command-path:
/:
permission: ro
sudo:
action: allow
command-path:
/:
permission: all
role:
nvue-admin:
class:
nvapply: {}
nvue-monitor:
class:
nvshow: {}
system-admin:
class:
nvapply: {}
sudo: {}
user:
cumulus:
full-name: cumulus,,,
hashed-password: $6$VYY4ykwe0LrdedRG$MNfa/eX7COUh57bGG2pZJROnvBWDfOQCnowaOiuKumvVyno/4fvWbEMEbaACLqsAQMGw5SYtgtTn.5WU5USFo.
role: system-admin
api:
state: enabled
config:
auto-save:
enable: on
control-plane:
acl:
acl-default-dos:
inbound: {}
acl-default-whitelist:
inbound: {}
global:
system-mac: 44:38:39:22:01:78
hostname: leaf02
reboot:
mode: cold
ssh-server:
state: enabled
wjh:
channel:
forwarding:
trigger:
l2: {}
l3: {}
tunnel: {}
enable: on
vrf:
default:
router:
ospf:
area:
'0':
network:
10.10.10.2/32: {}
enable: on
router-id: 10.10.10.2
cumulus@spine01:~$ sudo cat /etc/nvue.d/startup.yaml
- set:
interface:
eth0:
ip:
address:
dhcp: {}
vrf: mgmt
type: eth
lo:
ip:
address:
10.10.10.101/32: {}
type: loopback
swp1:
ip:
address:
10.10.10.101/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
swp2:
ip:
address:
10.10.10.101/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
swp5:
ip:
address:
10.10.10.101/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
swp6:
ip:
address:
10.10.10.101/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
router:
ospf:
enable: on
timers:
spf:
holdtime: 100
max-holdtime: 6000
service:
ntp:
mgmt:
server:
0.cumulusnetworks.pool.ntp.org: {}
1.cumulusnetworks.pool.ntp.org: {}
2.cumulusnetworks.pool.ntp.org: {}
3.cumulusnetworks.pool.ntp.org: {}
system:
aaa:
class:
nvapply:
action: allow
command-path:
/:
permission: all
nvshow:
action: allow
command-path:
/:
permission: ro
sudo:
action: allow
command-path:
/:
permission: all
role:
nvue-admin:
class:
nvapply: {}
nvue-monitor:
class:
nvshow: {}
system-admin:
class:
nvapply: {}
sudo: {}
user:
cumulus:
full-name: cumulus,,,
hashed-password: $6$m.snt3F/unawCsit$8frw1.klD4wdYPMjb/chqYLihsDvjLtoT2913fZ/3p9vZfXRsAkcjV0O2mpOoLrvrM2uZlLIYVgxqoHZH7c6t/
role: system-admin
api:
state: enabled
config:
auto-save:
enable: on
control-plane:
acl:
acl-default-dos:
inbound: {}
acl-default-whitelist:
inbound: {}
global:
system-mac: 44:38:39:22:01:82
hostname: spine01
reboot:
mode: cold
ssh-server:
state: enabled
wjh:
channel:
forwarding:
trigger:
l2: {}
l3: {}
tunnel: {}
enable: on
vrf:
default:
router:
ospf:
area:
'0':
network:
10.10.10.101/32: {}
enable: on
router-id: 10.10.10.101
cumulus@spine02:~$ sudo cat /etc/nvue.d/startup.yaml
- set:
interface:
eth0:
ip:
address:
dhcp: {}
vrf: mgmt
type: eth
lo:
ip:
address:
10.10.10.102/32: {}
type: loopback
swp1:
ip:
address:
10.10.10.102/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
swp2:
ip:
address:
10.10.10.102/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
swp5:
ip:
address:
10.10.10.102/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
swp6:
ip:
address:
10.10.10.102/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
router:
ospf:
enable: on
timers:
spf:
holdtime: 100
max-holdtime: 6000
service:
ntp:
mgmt:
server:
0.cumulusnetworks.pool.ntp.org: {}
1.cumulusnetworks.pool.ntp.org: {}
2.cumulusnetworks.pool.ntp.org: {}
3.cumulusnetworks.pool.ntp.org: {}
system:
aaa:
class:
nvapply:
action: allow
command-path:
/:
permission: all
nvshow:
action: allow
command-path:
/:
permission: ro
sudo:
action: allow
command-path:
/:
permission: all
role:
nvue-admin:
class:
nvapply: {}
nvue-monitor:
class:
nvshow: {}
system-admin:
class:
nvapply: {}
sudo: {}
user:
cumulus:
full-name: cumulus,,,
hashed-password: $6$UWQi/FawiF0WBP.8$zlLS2.FiUHsZ37L6v/8MmV9W0CVjdbyn4PSDwm5Cr6Ct02EtvAihYXgUy9owXAx0jQYIm2XbKBunxN6VpEr4X1
role: system-admin
api:
state: enabled
config:
auto-save:
enable: on
control-plane:
acl:
acl-default-dos:
inbound: {}
acl-default-whitelist:
inbound: {}
global:
system-mac: 44:38:39:22:01:92
hostname: spine02
reboot:
mode: cold
ssh-server:
state: enabled
wjh:
channel:
forwarding:
trigger:
l2: {}
l3: {}
tunnel: {}
enable: on
vrf:
default:
router:
ospf:
area:
'0':
network:
10.10.10.102/32: {}
enable: on
router-id: 10.10.10.102
cumulus@border01:mgmt:~$ sudo cat /etc/nvue.d/startup.yaml
- set:
bridge:
domain:
br_default:
untagged: 1
vlan:
'2001': {}
interface:
bond1:
bond:
lacp-bypass: on
member:
swp1: {}
mlag:
enable: on
id: 1
bridge:
domain:
br_default:
access: 2001
type: bond
bond2:
bond:
lacp-bypass: on
member:
swp2: {}
mlag:
enable: on
id: 2
bridge:
domain:
br_default:
access: 2001
type: bond
eth0:
ip:
address:
dhcp: {}
vrf: mgmt
type: eth
lo:
ip:
address:
10.10.10.63/32: {}
type: loopback
peerlink:
bond:
member:
swp49: {}
swp50: {}
type: peerlink
peerlink.4094:
base-interface: peerlink
type: sub
vlan: 4094
swp51:
ip:
address:
10.10.10.63/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
swp52:
ip:
address:
10.10.10.63/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
vlan2001:
ip:
address:
10.1.201.2/24: {}
vrr:
address:
10.1.201.1/24: {}
enable: on
mac-address: 00:00:5e:00:01:00
state:
up: {}
router:
ospf:
area: 1
enable: on
type: svi
vlan: 2001
mlag:
backup:
10.10.10.64: {}
enable: on
init-delay: 5
mac-address: 44:38:39:FF:00:FF
peer-ip: linklocal
router:
ospf:
enable: on
timers:
spf:
holdtime: 100
max-holdtime: 6000
vrr:
enable: on
service:
ntp:
mgmt:
server:
0.cumulusnetworks.pool.ntp.org: {}
1.cumulusnetworks.pool.ntp.org: {}
2.cumulusnetworks.pool.ntp.org: {}
3.cumulusnetworks.pool.ntp.org: {}
system:
aaa:
class:
nvapply:
action: allow
command-path:
/:
permission: all
nvshow:
action: allow
command-path:
/:
permission: ro
sudo:
action: allow
command-path:
/:
permission: all
role:
nvue-admin:
class:
nvapply: {}
nvue-monitor:
class:
nvshow: {}
system-admin:
class:
nvapply: {}
sudo: {}
user:
cumulus:
full-name: cumulus,,,
hashed-password: $6$siKWEoNyDqJpzgTg$kjQ12uQTIHRnsbF0hYbbPfRP6PRuCSk66Q79KHKEJVcx.raueCfL3hiW4FxqgDBOxWxLTC.U8fYeASiKvBS7A0
role: system-admin
api:
state: enabled
config:
auto-save:
enable: on
control-plane:
acl:
acl-default-dos:
inbound: {}
acl-default-whitelist:
inbound: {}
global:
system-mac: 44:38:39:22:01:74
hostname: border01
reboot:
mode: cold
ssh-server:
state: enabled
wjh:
channel:
forwarding:
trigger:
l2: {}
l3: {}
tunnel: {}
enable: on
vrf:
default:
router:
ospf:
area:
'0':
network:
10.10.10.63/32: {}
enable: on
router-id: 10.10.10.63
cumulus@border02:mgmt:~$ sudo cat /etc/nvue.d/startup.yaml
- set:
bridge:
domain:
br_default:
untagged: 1
vlan:
'2001': {}
interface:
bond1:
bond:
lacp-bypass: on
member:
swp1: {}
mlag:
enable: on
id: 1
bridge:
domain:
br_default:
access: 2001
type: bond
bond2:
bond:
lacp-bypass: on
member:
swp2: {}
mlag:
enable: on
id: 2
bridge:
domain:
br_default:
access: 2001
type: bond
eth0:
ip:
address:
dhcp: {}
vrf: mgmt
type: eth
lo:
ip:
address:
10.10.10.64/32: {}
type: loopback
peerlink:
bond:
member:
swp49: {}
swp50: {}
type: peerlink
peerlink.4094:
base-interface: peerlink
type: sub
vlan: 4094
swp51:
ip:
address:
10.10.10.64/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
swp52:
ip:
address:
10.10.10.64/32: {}
router:
ospf:
area: 0
enable: on
network-type: point-to-point
timers:
dead-interval: 60
hello-interval: 5
type: swp
vlan2001:
ip:
address:
10.1.201.3/24: {}
vrr:
address:
10.1.201.1/24: {}
enable: on
mac-address: 00:00:5e:00:01:00
state:
up: {}
router:
ospf:
area: 1
enable: on
type: svi
vlan: 2001
mlag:
backup:
10.10.10.63: {}
enable: on
init-delay: 5
mac-address: 44:38:39:FF:00:FF
peer-ip: linklocal
router:
ospf:
enable: on
timers:
spf:
holdtime: 100
max-holdtime: 6000
vrr:
enable: on
service:
ntp:
mgmt:
server:
0.cumulusnetworks.pool.ntp.org: {}
1.cumulusnetworks.pool.ntp.org: {}
2.cumulusnetworks.pool.ntp.org: {}
3.cumulusnetworks.pool.ntp.org: {}
system:
aaa:
class:
nvapply:
action: allow
command-path:
/:
permission: all
nvshow:
action: allow
command-path:
/:
permission: ro
sudo:
action: allow
command-path:
/:
permission: all
role:
nvue-admin:
class:
nvapply: {}
nvue-monitor:
class:
nvshow: {}
system-admin:
class:
nvapply: {}
sudo: {}
user:
cumulus:
full-name: cumulus,,,
hashed-password: $6$tJNymcft48141Lz5$cEJBzLJTIQSgIIPOLRSLFPgVPR0QkBUXY1pVAPraVuatKWGS9s.AdUZCd0ayHqgCfwvYyECf9e93VYkdl4wgM0
role: system-admin
api:
state: enabled
config:
auto-save:
enable: on
control-plane:
acl:
acl-default-dos:
inbound: {}
acl-default-whitelist:
inbound: {}
global:
system-mac: 44:38:39:22:01:7c
hostname: border02
reboot:
mode: cold
ssh-server:
state: enabled
wjh:
channel:
forwarding:
trigger:
l2: {}
l3: {}
tunnel: {}
enable: on
vrf:
default:
router:
ospf:
area:
'0':
network:
10.10.10.64/32: {}
enable: on
router-id: 10.10.10.64
cumulus@leaf01:mgmt:~$ sudo cat /etc/network/interfaces
...
auto lo
iface lo inet loopback
address 10.10.10.1/32
auto mgmt
iface mgmt
address 127.0.0.1/8
address ::1/128
vrf-table auto
auto eth0
iface eth0 inet dhcp
ip-forward off
ip6-forward off
vrf mgmt
auto swp51
iface swp51
address 10.10.10.1/32
auto swp52
iface swp52
address 10.10.10.1/32
auto bond1
iface bond1
bond-slaves swp1
bond-mode 802.3ad
bond-lacp-bypass-allow yes
clag-id 1
bridge-access 10
auto bond2
iface bond2
bond-slaves swp2
bond-mode 802.3ad
bond-lacp-bypass-allow yes
clag-id 2
bridge-access 20
auto bond3
iface bond3
bond-slaves swp3
bond-mode 802.3ad
bond-lacp-bypass-allow yes
clag-id 3
bridge-access 30
auto peerlink
iface peerlink
bond-slaves swp49 swp50
bond-mode 802.3ad
bond-lacp-bypass-allow no
auto peerlink.4094
iface peerlink.4094
clagd-peer-ip linklocal
clagd-backup-ip 10.10.10.2
clagd-sys-mac 44:38:39:FF:00:AA
clagd-args –initDelay 180
auto vlan10
iface vlan10
address 10.1.10.2/24
address-virtual 00:00:5e:00:01:00 10.1.10.1/24
hwaddress 44:38:39:22:01:b1
vlan-raw-device br_default
vlan-id 10
auto vlan20
iface vlan20
address 10.1.20.2/24
address-virtual 00:00:5e:00:01:00 10.1.20.1/24
hwaddress 44:38:39:22:01:b1
vlan-raw-device br_default
vlan-id 20
auto vlan30
iface vlan30
address 10.1.30.2/24
address-virtual 00:00:5e:00:01:00 10.1.30.1/24
hwaddress 44:38:39:22:01:b1
vlan-raw-device br_default
vlan-id 30
auto br_default
iface br_default
bridge-ports bond1 bond2 bond3 peerlink
hwaddress 44:38:39:22:01:b1
bridge-vlan-aware yes
bridge-vids 10 20 30
bridge-pvid 1
cumulus@leaf02:~$ sudo cat /etc/network/interfaces
...
auto lo
iface lo inet loopback
address 10.10.10.2/32
auto mgmt
iface mgmt
address 127.0.0.1/8
address ::1/128
vrf-table auto
auto eth0
iface eth0 inet dhcp
ip-forward off
ip6-forward off
vrf mgmt
auto swp51
iface swp51
address 10.10.10.2/32
auto swp52
iface swp52
address 10.10.10.2/32
auto bond1
iface bond1
bond-slaves swp1
bond-mode 802.3ad
bond-lacp-bypass-allow yes
clag-id 1
bridge-access 10
auto bond2
iface bond2
bond-slaves swp2
bond-mode 802.3ad
bond-lacp-bypass-allow yes
clag-id 2
bridge-access 20
auto bond3
iface bond3
bond-slaves swp3
bond-mode 802.3ad
bond-lacp-bypass-allow yes
clag-id 3
bridge-access 30
auto peerlink
iface peerlink
bond-slaves swp49 swp50
bond-mode 802.3ad
bond-lacp-bypass-allow no
auto peerlink.4094
iface peerlink.4094
clagd-peer-ip linklocal
clagd-backup-ip 10.10.10.1
clagd-sys-mac 44:38:39:FF:00:AA
clagd-args –initDelay 180
auto vlan10
iface vlan10
address 10.1.10.3/24
address-virtual 00:00:5e:00:01:00 10.1.10.1/24
hwaddress 44:38:39:22:01:af
vlan-raw-device br_default
vlan-id 10
auto vlan20
iface vlan20
address 10.1.20.3/24
address-virtual 00:00:5e:00:01:00 10.1.20.1/24
hwaddress 44:38:39:22:01:af
vlan-raw-device br_default
vlan-id 20
auto vlan30
iface vlan30
address 10.1.30.3/24
address-virtual 00:00:5e:00:01:00 10.1.30.1/24
hwaddress 44:38:39:22:01:af
vlan-raw-device br_default
vlan-id 30
auto br_default
iface br_default
bridge-ports bond1 bond2 bond3 peerlink
hwaddress 44:38:39:22:01:af
bridge-vlan-aware yes
bridge-vids 10 20 30
bridge-pvid 1
cumulus@spine01:~$ cat /etc/network/interfaces
...
auto lo
iface lo inet loopback
address 10.10.10.101/32
auto mgmt
iface mgmt
address 127.0.0.1/8
address ::1/128
vrf-table auto
auto eth0
iface eth0 inet dhcp
ip-forward off
ip6-forward off
vrf mgmt
auto swp1
iface swp1
address 10.10.10.101/32
auto swp2
iface swp2
address 10.10.10.101/32
auto swp5
iface swp5
address 10.10.10.101/32
auto swp6
iface swp6
address 10.10.10.101/32
cumulus@spine02:~$ cat /etc/network/interfaces
...
auto lo
iface lo inet loopback
address 10.10.10.102/32
auto mgmt
iface mgmt
address 127.0.0.1/8
address ::1/128
vrf-table auto
auto eth0
iface eth0 inet dhcp
ip-forward off
ip6-forward off
vrf mgmt
auto swp1
iface swp1
address 10.10.10.102/32
auto swp2
iface swp2
address 10.10.10.102/32
auto swp5
iface swp5
address 10.10.10.102/32
auto swp6
iface swp6
address 10.10.10.102/32
cumulus@border01:~$ sudo cat /etc/network/interfaces
...
auto lo
iface lo inet loopback
address 10.10.10.63/32
auto mgmt
iface mgmt
address 127.0.0.1/8
address ::1/128
vrf-table auto
auto eth0
iface eth0 inet dhcp
ip-forward off
ip6-forward off
vrf mgmt
auto swp51
iface swp51
address 10.10.10.63/32
auto swp52
iface swp52
address 10.10.10.63/32
auto bond1
iface bond1
bond-slaves swp1
bond-mode 802.3ad
bond-lacp-bypass-allow yes
clag-id 1
bridge-access 2001
auto bond2
iface bond2
bond-slaves swp2
bond-mode 802.3ad
bond-lacp-bypass-allow yes
clag-id 2
bridge-access 2001
auto vlan2001
iface vlan2001
address 10.1.201.2/24
address-virtual 00:00:5e:00:01:00 10.1.201.1/24
hwaddress 44:38:39:22:01:ab
vlan-raw-device br_default
vlan-id 2001
auto peerlink
iface peerlink
bond-slaves swp49 swp50
bond-mode 802.3ad
bond-lacp-bypass-allow no
auto peerlink.4094
iface peerlink.4094
clagd-peer-ip linklocal
clagd-backup-ip 10.10.10.64
clagd-sys-mac 44:38:39:FF:00:FF
clagd-args –initDelay 180
auto br_default
iface br_default
bridge-ports bond1 bond2 peerlink
hwaddress 44:38:39:22:01:ab
bridge-vlan-aware yes
bridge-vids 1
bridge-pvid 1
cumulus@border02:~$ sudo cat /etc/network/interfaces
...
auto lo
iface lo inet loopback
address 10.10.10.64/32
auto mgmt
iface mgmt
address 127.0.0.1/8
address ::1/128
vrf-table auto
auto eth0
iface eth0 inet dhcp
ip-forward off
ip6-forward off
vrf mgmt
auto swp51
iface swp51
address 10.10.10.64/32
auto swp52
iface swp52
address 10.10.10.64/32
auto bond1
iface bond1
bond-slaves swp1
bond-mode 802.3ad
bond-lacp-bypass-allow yes
clag-id 1
bridge-access 2001
auto bond2
iface bond2
bond-slaves swp2
bond-mode 802.3ad
bond-lacp-bypass-allow yes
clag-id 2
bridge-access 2001
auto vlan2001
iface vlan2001
address 10.1.201.3/24
address-virtual 00:00:5e:00:01:00 10.1.201.1/24
hwaddress 44:38:39:22:01:b3
vlan-raw-device br_default
vlan-id 2001
auto peerlink
iface peerlink
bond-slaves swp49 swp50
bond-mode 802.3ad
bond-lacp-bypass-allow no
auto peerlink.4094
iface peerlink.4094
clagd-peer-ip linklocal
clagd-backup-ip 10.10.10.63
clagd-sys-mac 44:38:39:FF:00:FF
clagd-args –initDelay 180
auto br_default
iface br_default
bridge-ports bond1 bond2 peerlink
hwaddress 44:38:39:22:01:b3
bridge-vlan-aware yes
bridge-vids 1
bridge-pvid 1
cumulus@leaf01:~$ sudo cat /etc/frr/frr.conf
...
interface lo
ip ospf area 0
interface swp51
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface swp52
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface vlan10
ip ospf area 0
router ospf
passive-interface vlan10
interface vlan20
ip ospf area 0
router ospf
passive-interface vlan20
interface vlan30
ip ospf area 0
router ospf
passive-interface vlan30
vrf default
exit-vrf
vrf mgmt
exit-vrf
router ospf
ospf router-id 10.10.10.1
timers throttle spf 80 100 6000
! end of router ospf block
cumulus@leaf02:~$ sudo cat /etc/frr/frr.conf
...
interface lo
ip ospf area 0
interface swp51
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface swp52
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface vlan10
ip ospf area 0
router ospf
passive-interface vlan10
interface vlan20
ip ospf area 0
router ospf
passive-interface vlan20
interface vlan30
ip ospf area 0
router ospf
passive-interface vlan30
vrf default
exit-vrf
vrf mgmt
exit-vrf
router ospf
ospf router-id 10.10.10.2
timers throttle spf 80 100 6000
! end of router ospf block
cumulus@spine01:~$ sudo cat /etc/frr/frr.conf
...
interface lo
ip ospf area 0
interface swp1
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface swp2
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface swp5
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface swp6
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
vrf default
exit-vrf
vrf mgmt
exit-vrf
router ospf
ospf router-id 10.10.10.101
timers throttle spf 0 100 6000
! end of router ospf block
cumulus@spine02:~$ sudo cat /etc/frr/frr.conf
...
interface lo
ip ospf area 0
interface swp1
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface swp2
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface swp5
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface swp6
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
vrf default
exit-vrf
vrf mgmt
exit-vrf
router ospf
ospf router-id 10.10.10.102
timers throttle spf 0 100 6000
! end of router ospf block
cumulus@border01:~$ sudo cat /etc/frr/frr.conf
...
interface lo
ip ospf area 0
interface swp51
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface swp52
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface vlan2001
ip ospf area 1
vrf default
exit-vrf
vrf mgmt
exit-vrf
router ospf
ospf router-id 10.10.10.63
timers throttle spf 0 100 6000
! end of router ospf block
cumulus@border02:~$ sudo cat /etc/frr/frr.conf
...
interface lo
ip ospf area 0
interface swp51
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface swp52
ip ospf area 0
ip ospf network point-to-point
ip ospf hello-interval 5
ip ospf dead-interval 60
interface vlan2001
ip ospf area 1
vrf default
exit-vrf
vrf mgmt
exit-vrf
router ospf
ospf router-id 10.10.10.64
timers throttle spf 0 100 6000
! end of router ospf block
This simulation is running Cumulus Linux 5.14. The Cumulus Linux 5.15 simulation is coming soon.
The simulation starts with the example OSPF configuration. The demo is pre-configured using NVUE commands.
To validate the configuration, run the commands listed in the Troubleshooting section.