NetQ CLI Changes

Many commands have changed in this release to accommodate the addition of new options or to simplify their syntax. Additionally, new commands have been added and others have been removed. A summary of those changes is provided here.

New Commands

The following table summarizes the new commands available with this release.

CommandSummaryVersion
netq config add agent opta-enableEnables or disables the NetQ Platform (also known as OPTA).4.0.0
netq config add agent gnmi-enableEnables or disables the gNMI agent.4.0.0
netq config add agent gnmi-log-levelSets the log level verbosity for the gNMI agent.4.0.0
netq config add agent gnmi-portChanges the gNMI port.4.0.0
netq add check-filterCreates a filter for validations.4.0.0
netq del check-filterDeletes the specified check filter.4.0.0
netq show check-filterShows all check filters.4.0.0
netq [<hostname>] show roce-countersDisplays the RoCE counters.4.0.0
netq [<hostname>] show roce-configDisplays the RoCE configuration.4.0.0
netq [<hostname>] show roce-counters poolDisplays the RoCE counter pools.4.0.0

Modified Commands

The following table summarizes the commands that have been changed with this release.

Updated CommandWhat ChangedVersion
netq check agents
netq check bgp
netq check cl-version
netq check clag
netq check evpn
netq check interfaces
netq check mlag
netq check mtu
netq check ntp
netq check ospf
netq check sensors
netq check vlan
netq check vxlan
netq show unit-tests agent
netq show unit-tests bgp
netq show unit-tests cl-version
netq show unit-tests evpn
netq show unit-tests interfaces
netq show unit-tests ntp
netq show unit-tests ospf
netq show unit-tests sensors
netq show unit-tests vlan
netq show unit-tests vxlan
Added [check_filter_id &lt;text-check-filter-id>] as an option, so you can specify a unique ID for a check filter.4.0.0
netq check agents
netq check bgp
netq check clag
netq check interfaces
netq check mlag
netq check mtu
netq check ntp
Added [streaming] option to perform a streaming query check.4.0.0
netq [<hostname>] show bgpAdded `[establishedfailed]` options to show only established or failed BGP sessions.
netq config add agent wjh-thresholdYou can specify all instead of a list of traffic classes (&lt;text-tc-list>) or a list of ports (&lt;text-port-list>).4.0.0
netq config del agent wjh-thresholdYou can specify all instead of a list of traffic classes (&lt;text-tc-list>).4.0.0
netq [<hostname>] show eventsAdded tca_roce and roceconfig event types.4.0.0
netq lcm upgradeChanged the run-before-after option to run-snapshot-before-after.4.0.0

Removed Commands

The following table summarizes the commands that have been removed in this release.

Updated CommandVersion
netq check license4.0.0
netq show unit-tests license4.0.0