Install NIC and DPU Agents
Installing NetQ telemetry agents on your hosts with NVIDIA ConnectX adapters and NVIDIA BlueField data processing units (DPUs) allows you to track inventory data and statistics across devices. The DOCA Telemetry Service (DTS) is the agent that runs on hosts and DPUs to collect data.
- NIC telemetry for ConnectX adapters is supported only for on-premises NetQ deployments.
- ConnectX telemetry is supported on DTS version 1.14.2 and above.
Install DTS on ConnectX Hosts
To install and configure the DOCA Telemetry Service container on a host with ConnectX adapters, perform the following steps:
Obtain the latest DTS container image path from the NGC catalog. Select Get Container and copy the image path.
Run the DTS container with Docker on the host. Use the image path obtained in the previous step for the DTS_IMAGE variable and configure the IP address of your NetQ server for the
-i
option:
export DTS_IMAGE=nvcr.io/nvidia/doca/doca_telemetry:1.14.2-doca2.2.0-host
docker run -v "/opt/mellanox/doca/services/telemetry/config:/config" --rm --name doca-telemetry-init -ti $DTS_IMAGE /bin/bash -c "DTS_CONFIG_DIR=host_netq /usr/bin/telemetry-init.sh && /usr/bin/enable-fluent-forward.sh -i=10.10.10.1 -p=30001"
docker run -d --net=host \
--privileged \
-v "/opt/mellanox/doca/services/telemetry/config:/config" \
-v "/opt/mellanox/doca/services/telemetry/ipc_sockets:/tmp/ipc_sockets" \
-v "/opt/mellanox/doca/services/telemetry/data:/data" \
--rm --name doca-telemetry -it $DTS_IMAGE /usr/bin/telemetry-run.sh
Configure Prometheus Targets for ConnectX Adapters
The Prometheus adapter pod in NetQ collects statistics from ConnectX adapters in your network. To add adapters as a target for data collection, perform the following steps:
- On your NetQ VM, edit the
targets-config
ConfigMap with thekubectl edit cm targets-config
command.
Add the desired host IP addresses to the targets
stanza, maintaining yaml
indentation. Multiple entries must be separated by commas, and the port is 9100:
data:
targets.json: |-
[
{
"labels": {
"job": "node"
},
"targets": [
"10.10.10.10:9100","10.10.10.11:9100"
]
}
]
- Restart the
netq-prom-adapter
pod.
Retrieve the current pod name with the kubectl get pods | grep netq-prom
command:
cumulus@netq-server:~$ kubectl get pods | grep netq-prom
netq-prom-adapter-ffd9b874d-hxhbz 2/2 Running 0 3h50m
Restart the pod by deleting the running pod:
kubectl delete pod netq-prom-adapter-ffd9b874d-hxhbz
Install DTS on DPUs
To install and configure the DOCA Telemetry Service container on a DPU, perform the following steps:
Obtain the latest DTS container image path from the NGC catalog. Select Get Container and copy the image path.
Retrieve the container
yaml
configuration file onto the host. Use the path specified in the Adjusting the .yaml Configuration section in the NGC instructions. Copy it to/etc/kubelet.d/doca_telemetry_standalone.yaml
:
wget --content-disposition https://api.ngc.nvidia.com/v2/resources/nvidia/doca/doca_container_configs/versions/2.0.2v1/files/configs/2.0.2/doca_telemetry.yaml
- Edit the
command
in theinitContainers
section of the/etc/kubelet.d/doca_telemetry_standalone.yaml
file to set theDTS_CONFIG_DIR
parameter toinventory_netq
and configure the fluent forwarding-i
option to your NetQ server IP address and the-p
option to 30001:
initContainers:
...
command: ["/bin/bash", "-c", "DTS_CONFIG_DIR=inventory_netq /usr/bin/telemetry-init.sh && /usr/bin/enable-fluent-forward.sh -i=10.10.10.1 -p=30001"]
This step replaces the default configuration of command: ["/bin/bash", "-c", "/usr/bin/telemetry-init.sh && /usr/bin/enable-fluent-forward.sh"]
.
- Restart the DPE service with the
service dpe restart
command.