If you are using the current version of Cumulus NetQ, the content on this page may not be up to date. The current version of the documentation is available here. If you are redirected to the main page of the user guide, then this page may have been renamed; please search for it there.

add

netq add events-config

Suppresses system events, excluding them from event displays. You can suppress events for:

  • Two years (default): useful when you do not want to see the events
  • A designated amount of time: useful when you want to temporarily suppress events due to maintenance, or when testing a new network configuration

Events are displayed after the designated amount of time has passed.

Syntax

netq add events-config
    [events_config_id <text-events-config-id-anchor>]
    [events_config_name <text-events-config-name-anchor>]
    [message_type <text-message-type-anchor>]
    [events_id <text-events-id-anchor>]
    [scope <text-events-scope-anchor>]
    [is_active true | is_active false]
    [suppress_until <text-suppress-until>]

Required Arguments

None

Options

OptionValueDescription
events_config_id<text-events-config-id-anchor>Identifier for existing configuration; use to edit existing configuration
events_config_name<text-events-config-name-anchor>User-defined name for the configuration
message_type<text-message-type-anchor>Type of message to suppress. Values include agent, bgp, btrfsinfo, clag, clsupport, configdiff, evpn, link, ntp, ospf, sensor, services, and ssdutil.
events_id<text-events-id-anchor>Identifier for events
scope<text-events-scope-anchor>Rule, in the form of a regular expression, indicating which devices, subset of devices or attributes to suppress
is_activetrue, falseEnables or disables configuration
suppress_until<text-suppress-until>Amount of time, in seconds, to suppress the specified events

Sample Usage

Add a configuration called mybtrfs that suppresses OSPF-related events on leaf01 for the next 10 minutes:

netq add events-config events_config_name mybtrfs message_type ospf scope '[{"scope_name":"hostname","scope_value":"leaf01"},{"scope_name":"severity","scope_value":"*"}]' suppress_until 600
  • netq del events-config
  • netq show events-config

netq add notification channel

NetQ presents events to the user through notification channels. NetQ supports five channel types: email, PagerDuty, Slack, syslog, and generic (a webhook channel that sends notifications to third-party applications). This command configures these channels.

You must have at least one channel, one rule, and one filter to fully configure a notification.

Syntax

A form of this command is available for each channel type:

netq add notification channel email
    <text-channel-name>
    to <text-email-toids>
    [smtpserver <text-email-hostname>]
    [smtpport <text-email-port>]
    [login <text-email-id>]
    [password <text-email-password>]
    [severity info | severity error]

netq add notification channel pagerduty
    <text-channel-name>
    integration-key <text-integration-key>
    [severity info | severity error]

netq add notification channel slack
    <text-channel-name>
    webhook <text-webhook-url>
    [severity info | severity error]
    [tag <text-slack-tag>]

netq add notification channel syslog
    <text-channel-name>
    hostname <text-syslog-hostname>
    port <text-syslog-port>
    [severity info | severity error]

netq add notification channel generic 
    <text-channel-name> 
    webhook <text-webhook-url> 
    [severity info | severity error ] 
    [use-ssl True | use-ssl False] 
    [auth-type basic-auth generic-username <text-generic-username> generic-password <text-generic-password> | auth-type api-key key-name <text-api-key-name> key-value <text-api-key-value>]

Required Arguments

ArgumentValueDescription
emailNACreate an email channel to receive event notifications
pagerdutyNACreate a PagerDuty channel to receive event notifications
slackNACreate a Slack channel to receive event notifications
syslogNACreate a Syslog channel to receive event notifications
genericNACreate a generic channel to receive event notifications
NA<text-channel-name>Name of the channel
to<text-email-toids>Comma-separated list of recipient email addresses; you cannot add spaces
integration-key<text-integration-key>Service or routing key generated for your PagerDuty service. Default is an empty string ("").
webhook<text-webhook-url>Incoming webhook created in your instance
hostname<text-syslog-hostname>Name of the syslog server to receive notifications
port<text-syslog-port>Name of the port on the syslog server to receive notifications

Options

OptionValueDescription
smtpserver<text-email-hostname>Send notifications to the SMTP server with this hostname
smtpport<text-email-port>Send notifications to this port on the SMTP server
login<text-email-id>Email address for authentication
password<text-email-password>Password for authentication
severityinfo, errorOnly send notifications with this severity. Default severity is info.
auth-typeSpecify authentication method
use-sslTrue, FalseEnable SSL encryption
tag<text-slack-tag>Short text appended to a Slack notification to highlight particular channels or people. You must introduce the tag value with the @ sign. For example, @netq-info or @net-admin.

Sample Usage

Create an email channel

cumulus@switch:~$ netq add notification channel email onprem-email to netq-notifications@domain.com smtpserver smtp.domain.com smtpport 587 login smtphostlogin@domain.com password MyPassword123
Successfully added/updated channel onprem-email

Create a PagerDuty channel:

cumulus@switch:~$ netq add notification channel pagerduty pd-netq-events integration-key c6d666e210a8425298ef7abde0d1998
Successfully added/updated channel pd-netq-events

Create a Slack channel:

cumulus@switch:~$ netq add notification channel slack slk-netq-events webhook https://hooks.slack.com/services/text/moretext/evenmoretext
Successfully added/updated channel slk-netq-events

Create a Syslog channel:

cumulus@switch:~$ netq add notification channel syslog syslog-netq-events hostname syslog-server port 514
Successfully added/updated channel syslog-netq-events

Refer to Configure System Event Notifications for more information and complete notification configurations.

  • netq del notification channel
  • netq add notification rule
  • netq add notification filter
  • netq add notification proxy
  • netq show notification

netq add notification filter

Event notification filters tie notification rules to the notification channels. Filters can limit events so only those with a given severity get sent. You can insert filters before or after other filters to achieve the level of filtering desired. Refer to Create Filters for implementation details and additional examples.

You must have at least one channel, one rule, and one filter to fully configure a notification.

Syntax

netq add notification filter
    <text-filter-name>
    [severity info | severity error]
    [rule <text-rule-name-anchor>]
    [channel <text-channel-name-anchor>]
    [before <text-filter-name-anchor> | after <text-filter-name-anchor>]

Required Arguments

ArgumentValueDescription
NA<text-filter-name>Name of the filter

Options

OptionValueDescription
severityinfo, errorOnly filter notifications with this severity. Default severity is info.
rule<text-rule-name-anchor>Name of the rule for where to apply this filter
channel<text-channel-name-anchor>Name of the channel for where to apply this filter.
before<text-filter-name-anchor>Insert this filter before the filter with this name.
after<text-filter-name-anchor>Insert this filter after the filter with this name.

Sample Usage

Create filter and assign it to an email channel:

cumulus@switch:~$ netq add notification filter notify-all-ifs rule all-interfaces channel onprem-email
Successfully added/updated filter notify-all-ifs

Create a filter and assign to a Slack channel:

cumulus@switch:~$ netq add notification filter notify-all-ifs rule all-interfaces channel slk-netq-events
Successfully added/updated filter notify-all-ifs
  • netq del notification filter
  • netq add notification rule
  • netq add notification channel
  • netq add notification proxy
  • netq show notification

netq add notification rule

Event notification rules define which events to include or exclude from a notification. Rules are a key-value pair. Each key has a defined set of values available for filtering against. Refer to Create Rules for implementation details and additional examples.

You must have at least one channel, one rule, and one filter to fully configure a notification.

Syntax

netq add notification rule
    <text-rule-name>
    key <text-rule-key>
    value <text-rule-value>

Required Arguments

ArgumentValueDescription
NA<text-rule-name>Name of the rule
key<text-rule-key>Only send events with this key
value<text-rule-value>Only send events with this key value

Options

None

Sample Usage

Create rule to send all interface events:

cumulus@switch:~$ netq add notification rule all-interfaces key ifname value ALL
Successfully added/updated rule all-ifs

Create EVPN rule based on a VNI:

cumulus@switch:~$ netq add notification rule evpnVni key vni value 42
Successfully added/updated rule evpnVni
  • netq del notification rule
  • netq add notification filter
  • netq add notification channel
  • netq add notification proxy
  • netq show notification

netq add notification proxy

To send event notifications through a proxy server instead of directly to a notification channel, configure NetQ with the hostname, and optionally a proxy server port. If you do not specify a port, NetQ defaults to port 80. Only one proxy server is currently supported. To simplify deployment, configure your proxy server before configuring channels, rules, or filters.

Syntax

netq add notification proxy
    <text-proxy-hostname>
    [port <text-proxy-port>]

Required Arguments

ArgumentValueDescription
NA<text-proxy-hostname>Send notifications to the proxy server with this name

Options

OptionValueDescription
port<text-proxy-port>Send notifications to the port on the proxy server with this name

Sample Usage

Create proxy for event notification on default port

cumulus@switch:~$ netq add notification proxy proxy4
Successfully configured notifier proxy proxy4:80
  • netq del notification proxy
  • netq add notification channel
  • netq add notification rule
  • netq add notification filter
  • netq show notification

netq add tca

NetQ supports a set of events that trigger after crossing a user-defined threshold, called TCA events. These events allow detection and prevention of network failures for selected ACL resources, digital optics, forwarding resources, interface errors and statistics, link flaps, resource utilization, and sensor events. You can find a complete list in the Threshold-Crossing Events Reference.

A TCA event notification configuration must contain one rule. Each rule must contain a scope and a threshold. Optionally, you can specify an associated channel. Note: If a rule is not associated with a channel, the event information is only reachable from the database. If you want to deliver events to one or more notification channels, create the channels before you create TCA events with netq add notification channel.

Syntax

Two forms of the command are available: one that uses the event_id argument used to create the notification, and one that uses the tca_id argument used to modify an existing notification.

netq add tca event_id <text-event-id-anchor>
    [scope <text-scope-anchor>]
    [severity info | severity error]
    [is_active true | is_active false]
    [suppress_until <text-suppress-ts>]
    [threshold_type user_set | threshold_type vendor_set]
    [threshold <text-threshold-value>]
    [channel <text-channel-name-anchor> | channel drop <text-drop-channel-name>]

netq add tca tca_id <text-tca-id-anchor>
    [scope <text-scope-anchor>]
    [severity info | severity error]
    [is_active true | is_active false]
    [suppress_until <text-suppress-ts>]
    [threshold_type user_set | threshold_type vendor_set]
    [threshold <text-threshold-value>]
    [channel <text-channel-name-anchor> | channel drop <text-drop-channel-name>]

Required Arguments

ArgumentValueDescription
event_id<text-event-id-anchor>Create threshold-based event rule for the type of event with this ID
tca_id<text-tca-id-anchor>Modify the existing threshold-based event with this ID

Options

OptionValueDescription
scope<text-scope-anchor>Regular expression that filters the events. When you use two parameters, separate them with a comma, but no space. When you use an asterisk (*) alone, you must surround it with either single or double quotes.
severityinfo, errorOnly include events with this severity
is_activetrue, falseActivate or deactivate the TCA event rule
suppress_until<text-suppress-ts>Suppress this event rule until the specified time, formatted as seconds from now
threshold_typeuser_set, vendor_setApply threshold specified in threshold option or the default specified by the vendor for this attribute
threshold<text-threshold-value>Value that, when crossed, triggers the event
channel<text-channel-name-anchor>Send the events to the channel with this name
channel drop<text-drop-channel-name>Stop sending events to the channel with this name

Sample Usage

Basic threshold-based event notification:

cumulus@switch:~$ netq add tca event_id TCA_CPU_UTILIZATION_UPPER scope leaf* threshold 80
Successfully added/updated tca

Create threshold-based event notification and deliver to an existing syslog channel:

cumulus@switch:~$ netq add tca event_id TCA_SENSOR_TEMPERATURE_UPPER scope leaf12,temp1 threshold 32 channel syslog-netq-events
Successfully added/updated tca

Change the threshold for the rule TCA_CPU_UTILIZATION_UPPER_1 to a value of 96 percent. This overwrites the existing threshold value.

cumulus@switch:~$ netq add tca tca_id TCA_CPU_UTILIZATION_UPPER_1 threshold 96
  • netq del tca
  • netq show tca
  • netq add notification channel

netq add trace

Create an on-demand trace and see the results in the On-demand Trace Results card in the NetQ UI rather than in text form in your terminal window. Refer to Verify Network Connectivity for additional information. Note that the tracing function only knows about already learned addresses. If you find that a path is invalid or incomplete, you could ping the identified device so that its address becomes known.

Syntax

Two forms of this command are available: one for layer 2 tracing and one for layer 3 tracing.

netq add trace <mac>
    [vlan <1-4096>]
    from (<src-hostname> | <ip-src>)
    [vrf <vrf>]
    [alert-on-failure]

netq add trace <ip>
    from (<src-hostname> | <ip-src>)
    [vrf <vrf>]
    [alert-on-failure]

Required Arguments

ArgumentValueDescription
NA<mac>Create a layer 2 trace to this MAC address
NA<ip>Create a layer 3 trace to this IPv4 or IPv6 address
from<src-hostname>, <ip-src>Create a trace beginning at the device with this hostname or IPv4/v6 address

Options

OptionValueDescription
vlan1-4096Create a layer 2 trace through this VLAN
vrf<vrf>Create a layer 2 or 3 trace through this VRF
alert-on-failureNAGenerate an event when the trace fails

Sample Usage

Create a layer 3 trace through a given VRF:

cumulus@switch:~$ netq add trace 10.1.10.104 from 10.1.10.101 vrf RED

Create a layer 2 trace through a given VLAN:

cumulus@switch:~$ netq add trace 44:38:39:00:00:3e vlan 10 from 44:38:39:00:00:32
  • netq add trace name
  • netq del trace
  • netq show trace
  • netq show events type trace

netq add trace name

Create a scheduled trace and see the results in the Scheduled Trace Results card in the NetQ UI rather than in text form in your terminal window. Refer to Verify Network Connectivity for additional information. Note that the tracing function only knows about already learned addresses. If you find that a path is invalid or incomplete, ping the identified device so that its address becomes known.

Syntax

Two forms of this command are available: one for layer 2 tracing and one for layer 3 tracing.

netq add trace name
    <text-new-trace-name>
    <mac>
    [vlan <1-4096>]
    from (<src-hostname> | <ip-src>)
    [vrf <vrf>]
    interval <text-time-min>
    [alert-on-failure]

netq add trace name
    <text-new-trace-name>
    <ip>
    from (<src-hostname> | <ip-src>)
    [vrf <vrf>]
    interval <text-time-min>
    [alert-on-failure]

Required Arguments

ArgumentValueDescription
name<text-new-trace-name>Unique name (per user) for the trace
NA<mac>Create a layer 2 trace to this MAC address
NA<ip>Create a layer 3 trace to this IPv4 or IPv6 address
from<src-hostname>, <ip-src>Create a trace beginning at the device with this hostname or IPv4/v6 address
interval<text-time-min>Set how often to run the trace, in minutes

Options

OptionValueDescription
vlan1-4096Create a layer 2 trace through this VLAN
vrf<vrf>Create a layer 2 or 3 trace through this VRF
alert-on-failureNAGenerate an event if the trace fails

Sample Usage

Create a layer 3 trace that runs every 24 hours (1440 minutes):

cumulus@switch:~$ netq add trace name Lf01toBor01Daily 10.10.10.63 from 10.10.10.1 interval 1440m
Successfully added/updated Lf01toBor01Daily running every 1440m

Create a layer 2 trace that runs every 3 hours (180 minutes):

cumulus@switch:~$ netq add trace name Svr01toSvr04x3Hrs 44:38:39:00:00:3e vlan 10 from 10.1.10.101 interval 180m
Successfully added/updated Svr01toSvr04x3Hrs running every 180m
  • netq add trace
  • netq del trace
  • netq show trace
  • netq show events type trace

netq add validation

Creates a validation for various protocols and services to run on a regular interval, with results displayed inline. You can configure a maximum of 15 scheduled validations, not including the default scheduled validations.

Syntax

netq add validation
    name <text-new-validation-name>
    type (ntp | interfaces | license | sensors | evpn | vxlan | agents | mlag | vlan | bgp | mtu | ospf | roce | addr)
    interval <text-time-min>
    [alert-on-failure]

Required Arguments

ArgumentValueDescription
nameuser definedUnique name for the validation
typeaddr, agents, bgp, evpn, interfaces, license, mlag, mtu, ntp, ospf, roce, sensors, vlan, or vxlanProtocol or service to validate
interval<text-time-min>Frequency to run the validation, in minutes. Value must include time unit of m, minutes. Default scheduled validations per type run every 60 minutes.

Options

OptionValueDescription
alert-on-failureNAGenerate an event if the validation fails

Sample Usage

BGP validation that runs on all devices, every 15 minutes:

cumulus@switch:~$ netq add validation name Bgp15m type bgp interval 15m
  • netq add validation
  • netq del validation
  • netq show validation settings
  • netq show validation summary

netq add validation type

Creates an on-demand validation for various protocols and services, with results displayed inline.

Syntax

netq add validation
    type (ntp | interfaces | license | sensors | evpn | vxlan | agents | mlag | vlan | bgp | mtu | ospf | roce | addr)
    [alert-on-failure]

Required Arguments

ArgumentValueDescription
typeaddr, agents, bgp, evpn, interfaces, license, mlag, mtu, ntp, ospf, roce, sensors, vlan, or vxlanProtocol or service to validate

Options

OptionValueDescription
alert-on-failureNAGenerate an event if the validation fails

Sample Usage

Create a BGP validation:

cumulus@switch:~$ netq add validation type bgp
  • netq add validation
  • netq del validation
  • netq show validation settings
  • netq show validation summary