If you are using the current version of Cumulus NetQ, the content on this page may not be up to date. The current version of the documentation is available here. If you are redirected to the main page of the user guide, then this page may have been renamed; please search for it there.

Threshold-Crossing Events Reference

This reference lists the threshold-based events that NetQ supports. You can view these messages through third-party notification applications. For details about configuring notifications for these events, refer to Configure and Monitor Threshold-Crossing Events.

ACL Resources

NetQ UI NameNetQ CLI Event IDDescription
Ingress ACL IPv4 %TCA_TCAM_IN_ACL_V4_FILTER_UPPERNumber of ingress ACL filters for IPv4 addresses on a given switch or host exceeded user-defined threshold
Egress ACL IPv4 %TCA_TCAM_EG_ACL_V4_FILTER_UPPERNumber of egress ACL filters for IPv4 addresses on a given switch or host exceeded user-defined maximum threshold
Ingress ACL IPv4 mangle %TCA_TCAM_IN_ACL_V4_MANGLE_UPPERNumber of ingress ACL mangles for IPv4 addresses on a given switch or host exceeded user-defined maximum threshold
Ingress ACL IPv4 mangle %TCA_TCAM_EG_ACL_V4_MANGLE_UPPERNumber of egress ACL mangles for IPv4 addresses on a given switch or host exceeded user-defined maximum threshold
Ingress ACL IPv6 %TCA_TCAM_IN_ACL_V6_FILTER_UPPERNumber of ingress ACL filters for IPv6 addresses on a given switch or host exceeded user-defined maximum threshold
Egress ACL IPv6 %TCA_TCAM_EG_ACL_V6_FILTER_UPPERNumber of egress ACL filters for IPv6 addresses on a given switch or host exceeded user-defined maximum threshold
Ingress ACL IPv6 mangle %TCA_TCAM_IN_ACL_V6_MANGLE_UPPERNumber of ingress ACL mangles for IPv6 addresses on a given switch or host exceeded user-defined maximum threshold
Egress ACL IPv6 mangle %TCA_TCAM_EG_ACL_V6_MANGLE_UPPERNumber of egress ACL mangles for IPv6 addresses on a given switch or host exceeded user-defined maximum threshold
Ingress ACL 8021x %TCA_TCAM_IN_ACL_8021x_FILTER_UPPERNumber of ingress ACL 802.1 filters on a given switch or host exceeded user-defined maximum threshold
ACL L4 port %TCA_TCAM_ACL_L4_PORT_CHECKERS_UPPERNumber of ACL port range checkers on a given switch or host exceeded user-defined maximum threshold
ACL regions %TCA_TCAM_ACL_REGIONS_UPPERNumber of ACL regions on a given switch or host exceeded user-defined maximum threshold
Ingress ACL mirror %TCA_TCAM_IN_ACL_MIRROR_UPPERNumber of ingress ACL mirrors on a given switch or host exceeded user-defined maximum threshold
ACL 18B rules %TCA_TCAM_ACL_18B_RULES_UPPERNumber of ACL 18B rules on a given switch or host exceeded user-defined maximum threshold
ACL 32B %TCA_TCAM_ACL_32B_RULES_UPPERNumber of ACL 32B rules on a given switch or host exceeded user-defined maximum threshold
ACL 54B %TCA_TCAM_ACL_54B_RULES_UPPERNumber of ACL 54B rules on a given switch or host exceeded user-defined maximum threshold
Ingress PBR IPv4 %TCA_TCAM_IN_PBR_V4_FILTER_UPPERNumber of ingress policy-based routing (PBR) filters for IPv4 addresses on a given switch or host exceeded user-defined maximum threshold
Ingress PBR IPv6 %TCA_TCAM_IN_PBR_V6_FILTER_UPPERNumber of ingress policy-based routing (PBR) filters for IPv6 addresses on a given switch or host exceeded user-defined maximum threshold

BGP

NetQ UI NameNetQ CLI Event IDDescription
BGP connection dropTCA_BGP_CONN_DROPIncrease in drop count for a BGP session exceeding user-defined threshold
BGP packet queue lengthTCA_BGP_PACKET_QUEUE_LENGTHPacket queue length persistently non-zero for more than the threshold duration (in seconds)

Digital Optics

NetQ UI NameNetQ CLI Event IDDescription
Laser Rx power alarm upperTCA_DOM_RX_POWER_ALARM_UPPERTransceiver Input power (mW) for the digital optical module on a given switch or host interface exceeded user-defined the maximum alarm threshold
Laser Rx power alarm lowerTCA_DOM_RX_POWER_ALARM_LOWERTransceiver Input power (mW) for the digital optical module on a given switch or host exceeded user-defined minimum alarm threshold
Laser Rx power warning upperTCA_DOM_RX_POWER_WARNING_UPPERTransceiver Input power (mW) for the digital optical module on a given switch or host exceeded user-defined specified warning threshold
Laser Rx power warning lowerTCA_DOM_RX_POWER_WARNING_LOWERTransceiver Input power (mW) for the digital optical module on a given switch or host exceeded user-defined minimum warning threshold
Laser bias current alarm upperTCA_DOM_BIAS_CURRENT_ALARM_UPPERLaser bias current (mA) for the digital optical module on a given switch or host exceeded user-defined maximum alarm threshold
Laser bias current alarm lowerTCA_DOM_BIAS_CURRENT_ALARM_LOWERLaser bias current (mA) for the digital optical module on a given switch or host exceeded user-defined minimum alarm threshold
Laser bias current warning upperTCA_DOM_BIAS_CURRENT_WARNING_UPPERLaser bias current (mA) for the digital optical module on a given switch or host exceeded user-defined maximum warning threshold
Laser bias current warning lowerTCA_DOM_BIAS_CURRENT_WARNING_LOWERLaser bias current (mA) for the digital optical module on a given switch or host exceeded user-defined minimum warning threshold
Laser output power alarm upperTCA_DOM_OUTPUT_POWER_ALARM_UPPERLaser output power (mW) for the digital optical module on a given switch or host exceeded user-defined maximum alarm threshold
Laser output power alarm lowerTCA_DOM_OUTPUT_POWER_ALARM_LOWERLaser output power (mW) for the digital optical module on a given switch or host exceeded user-defined minimum alarm threshold
Laser output power alarm upperTCA_DOM_OUTPUT_POWER_WARNING_UPPERLaser output power (mW) for the digital optical module on a given switch or host exceeded user-defined maximum warning threshold
Laser output power warning lowerTCA_DOM_OUTPUT_POWER_WARNING_LOWERLaser output power (mW) for the digital optical module on a given switch or host exceeded user-defined minimum warning threshold
Laser module temperature alarm upperTCA_DOM_MODULE_TEMPERATURE_ALARM_UPPERDigital optical module temperature (°C) on a given switch or host exceeded user-defined maximum alarm threshold
Laser module temperature alarm lowerTCA_DOM_MODULE_TEMPERATURE_ALARM_LOWERDigital optical module temperature (°C) on a given switch or host exceeded user-defined minimum alarm threshold
Laser module temperature warning upperTCA_DOM_MODULE_TEMPERATURE_WARNING_UPPERDigital optical module temperature (°C) on a given switch or host exceeded user-defined maximum warning threshold
Laser module temperature warning lowerTCA_DOM_MODULE_TEMPERATURE_WARNING_LOWERDigital optical module temperature (°C) on a given switch or host exceeded user-defined minimum warning threshold
Laser module voltage alarm upperTCA_DOM_MODULE_VOLTAGE_ALARM_UPPERTransceiver voltage (V) on a given switch or host exceeded user-defined maximum alarm threshold
Laser module voltage alarm lowerTCA_DOM_MODULE_VOLTAGE_ALARM_LOWERTransceiver voltage (V) on a given switch or host exceeded user-defined minimum alarm threshold
Laser module voltage warning upperTCA_DOM_MODULE_VOLTAGE_WARNING_UPPERTransceiver voltage (V) on a given switch or host exceeded user-defined maximum warning threshold
Laser module voltage warning lowerTCA_DOM_MODULE_VOLTAGE_WARNING_LOWERTransceiver voltage (V) on a given switch or host exceeded user-defined minimum warning threshold

DPU RoCE

NetQ UI NameNetQ CLI Event IDDescription
Implied nak seq errorTCA_HOSTD_IMPLIED_NAK_SEQ_ERRCount of implied sequence errors exceeded user-defined maximum threshold
Out of bufferTCA_HOSTD_OUT_OF_BUFFERCount of out-of-buffer errors exceeded user-defined maximum threshold
Outbound PCI stalled readTCA_HOSTD_OUTBOUND_PCI_STALLED_RDPercentage of outbound stalled read requests exceeded user-defined maximum threshold
Outbound PCI stalled writeTCA_HOSTD_OUTBOUND_PCI_STALLED_WRPercentage of outbound stalled write requests exceeded user-defined maximum threshold
Packet seq errTCA_HOSTD_PACKET_SEQ_ERRCount of packet sequence errors exceeded user-defined maximum threshold
Req CQE errorTCA_HOSTD_REQ_CQE_ERRORCount of req completion queue events (CQE) errors exceeded user-defined maximum threshold
Req remote access errorsTCA_HOSTD_REQ_REMOTE_ACCESS_ERRORSCount of remote access errors exceeded user-defined maximum threshold
Resp CQE errorTCA_HOSTD_RESP_CQE_ERRORCount of response completion queue events (CQE) errors exceeded user-defined maximum threshold
Resp remote access errorsTCA_HOSTD_RESP_REMOTE_ACCESS_ERRORSCount of response remote access errors exceeded user-defined maximum threshold
RNR nak retry errorTCA_HOSTD_RNR_NAK_RETRY_ERRCount of RNR retry errors exceeded user-defined maximum threshold
Rx CRC errors phyTCA_HOSTD_RX_CRC_ERRORS_PHYCount of Rx CRC errors exceeded user-defined maximum threshold
Rx discards phyTCA_HOSTD_RX_DISCARDS_PHYRate of Rx discards exceeded user-defined maximum threshold
Rx PCI signal integrityTCA_HOSTD_RX_PCI_SIGNAL_INTEGRITYCount of Rx PCIe signal integrity errors exceeded user-defined maximum threshold
Rx pcs symbol err phyTCA_HOSTD_RX_PCS_SYMBOL_ERR_PHYCount of Rx symbol errors exceeded user-defined maximum threshold
Rx prio0 buf discardTCA_HOSTD_RX_PRIO0_BUF_DISCARDRate of p0 buffer discards exceeded user-defined maximum threshold
Rx prio0 cong discardTCA_HOSTD_RX_PRIO0_CONG_DISCARDRate of p0 congestion discards exceeded user-defined maximum threshold
Rx prio1 buf discardTCA_HOSTD_RX_PRIO1_BUF_DISCARDRate of p1 buffer discards exceeded user-defined maximum threshold
Rx prio1 cong discardTCA_HOSTD_RX_PRIO1_CONG_DISCARDRate of p1 congestion discards exceeded user-defined maximum threshold
Rx prio2 buf discardTCA_HOSTD_RX_PRIO2_BUF_DISCARDRate of p2 buffer discards exceeded user-defined maximum threshold
Rx prio2 cong discardTCA_HOSTD_RX_PRIO2_CONG_DISCARDRate of p2 congestion discards exceeded user-defined maximum threshold
Rx prio3 buf discardTCA_HOSTD_RX_PRIO3_BUF_DISCARDRate of p3 buffer discards exceeded user-defined maximum threshold
Rx prio3 cong discardTCA_HOSTD_RX_PRIO3_CONG_DISCARDRate of p3 congestion discards exceeded user-defined maximum threshold
Rx prio4 buf discardTCA_HOSTD_RX_PRIO4_BUF_DISCARDRate of p4 buffer discards exceeded user-defined maximum threshold
Rx prio4 cong discardTCA_HOSTD_RX_PRIO4_CONG_DISCARDRate of p4 congestion discards exceeded user-defined maximum threshold
Rx prio5 buf discardTCA_HOSTD_RX_PRIO5_BUF_DISCARDRate of p5 buffer discards exceeded user-defined maximum threshold
Rx prio5 cong discardTCA_HOSTD_RX_PRIO5_CONG_DISCARDRate of p5 congestion discards exceeded user-defined maximum threshold
Rx prio6 buf discardTCA_HOSTD_RX_PRIO6_BUF_DISCARDRate of p6 buffer discards exceeded user-defined maximum threshold
Rx prio6 cong discardTCA_HOSTD_RX_PRIO6_CONG_DISCARDRate of p6 congestion discards exceeded user-defined maximum threshold
Rx prio7 buf discardTCA_HOSTD_RX_PRIO7_BUF_DISCARDRate of p7 buffer discards exceeded user-defined maximum threshold
Rx prio7 cong discardTCA_HOSTD_RX_PRIO7_CONG_DISCARDRate of p7 congestion discards exceeded user-defined maximum threshold
Rx symbol err phyTCA_HOSTD_RX_SYMBOL_ERR_PHYCount of Rx symbol errors (physical coding errors) exceeded user-defined maximum threshold
Tx discards phyTCA_HOSTD_TX_DISCARDS_PHYRate of Tx discards exceeded user-defined maximum threshold
Tx errors phyTCA_HOSTD_TX_ERRORS_PHYCount of Tx errors exceeded user-defined maximum threshold
Tx pause storm error eventsTCA_HOSTD_TX_PAUSE_STORM_ERROR_EVENTSCount of pause error events exceeded user-defined maximum threshold
Tx pause storm warning eventsTCA_HOSTD_TX_PAUSE_STORM_WARNING_EVENTSCount of pause warning events exceeded user-defined maximum threshold
Tx PCI signal integrityTCA_HOSTD_TX_PCI_SIGNAL_INTEGRITYCount of Tx PCIe signal integrity errors exceeded user-defined maximum threshold

ECMP

NetQ UI NameNetQ CLI Event IDDescription
ECMP imbalanceTCA_ECMP_IMBALANCEECMP path utilization imbalance greater than the threshold

Forwarding Resources

NetQ UI NameNetQ CLI Event IDDescription
Total route entries %TCA_TCAM_TOTAL_ROUTE_ENTRIES_UPPERNumber of routes on a given switch or host exceeded user-defined maximum threshold
Mcast routes %TCA_TCAM_TOTAL_MCAST_ROUTES_UPPERNumber of multicast routes on a given switch or host exceeded user-defined maximum threshold
MAC entries %TCA_TCAM_MAC_ENTRIES_UPPERNumber of MAC addresses on a given switch or host exceeded user-defined maximum threshold
IPv4 routes %TCA_TCAM_IPV4_ROUTE_UPPERNumber of IPv4 routes on a given switch or host exceeded user-defined maximum threshold
IPv4 hosts %TCA_TCAM_IPV4_HOST_UPPERNumber of IPv4 hosts on a given switch or host exceeded user-defined maximum threshold
Exceeding IPv6 routes %TCA_TCAM_IPV6_ROUTE_UPPERNumber of IPv6 routes on a given switch or host exceeded user-defined maximum threshold
IPv6 hosts %TCA_TCAM_IPV6_HOST_UPPERNumber of IPv6 hosts on a given switch or host exceeded user-defined maximum threshold
ECMP next hop %TCA_TCAM_ECMP_NEXTHOPS_UPPERNumber of equal cost multi-path (ECMP) next hop entries on a given switch or host exceeded user-defined maximum threshold

Interface Errors

NetQ UI NameNetQ CLI Event IDDescription
Oversize errorsTCA_HW_IF_OVERSIZE_ERRORSNumber of times a frame longer than maximum size (1518 Bytes) exceeded user-defined threshold
Undersize errorsTCA_HW_IF_UNDERSIZE_ERRORSNumber of times a frame shorter than minimum size (64 Bytes) exceeded user-defined threshold
Alignment errorsTCA_HW_IF_ALIGNMENT_ERRORSNumber of times a frame with an uneven byte count and a CRC error exceeded user-defined threshold
Jabber errorsTCA_HW_IF_JABBER_ERRORSNumber of times a frame longer than maximum size (1518 bytes) and with a CRC error exceeded user-defined threshold
Symbol errorsTCA_HW_IF_SYMBOL_ERRORSNumber of times that detected undefined or invalid symbols exceeded user-defined threshold

Interface Statistics

NetQ UI NameNetQ CLI Event IDDescription
Broadcast received bytesTCA_RXBROADCAST_UPPERNumber of broadcast receive bytes per second exceeded user-defined maximum threshold on a switch interface
Received bytesTCA_RXBYTES_UPPERNumber of receive bytes exceeded user-defined maximum threshold on a switch interface
Multicast received bytesTCA_RXMULTICAST_UPPERrx_multicast per second on a given switch or host exceeded user-defined maximum threshold
Broadcast transmitted bytesTCA_TXBROADCAST_UPPERNumber of broadcast transmit bytes per second exceeded user-defined maximum threshold on a switch interface
Transmitted bytesTCA_TXBYTES_UPPERNumber of transmit bytes exceeded user-defined maximum threshold on a switch interface
Multicast transmitted bytesTCA_TXMULTICAST_UPPERNumber of multicast transmit bytes per second exceeded user-defined maximum threshold on a switch interface
NetQ UI NameNetQ CLI Event IDDescription
Link flap errorsTCA_LINK_FLAP_UPPERNumber of link flaps exceeded user-defined maximum threshold

Resource Utilization

NetQ UI NameNetQ CLI Event IDDescription
Service memory utilizationTCA_SERVICE_MEMORY_UTILIZATION_UPPERPercentage of service memory utilization exceeded user-defined maximum threshold on a switch
Disk utilizationTCA_DISK_UTILIZATION_UPPERPercentage of disk utilization exceeded user-defined maximum threshold on a switch or host
CPU utilizationTCA_CPU_UTILIZATION_UPPERPercentage of CPU utilization exceeded user-defined maximum threshold on a switch or host
Service CPU utilizationTCA_SERVICE_CPU_UTILIZATION_UPPERPercentage of service CPU utilization exceeded user-defined maximum threshold on a switch
Memory utilizationTCA_MEMORY_UTILIZATION_UPPERPercentage of memory utilization exceeded user-defined maximum threshold on a switch or host

RoCE

NetQ UI NameNetQ CLI Event IDDescription
Rx CNP buffer usageTCA_RX_CNP_BUFFER_USAGE_CELLSPercentage of Rx General+CNP buffer usage exceeded user-defined maximum threshold on a switch interface
Rx CNP no buffer discardTCA_RX_CNP_NO_BUFFER_DISCARDRate of Rx General+CNP no buffer discard exceeded user-defined maximum threshold on a switch interface
Rx CNP PG usageTCA_RX_CNP_PG_USAGE_CELLSPercentage of Rx General+CNP PG usage exceeded user-defined maximum threshold on a switch interface
Rx RoCE buffer usageTCA_RX_ROCE_BUFFER_USAGE_CELLSPercentage of Rx RoCE buffer usage exceeded user-defined maximum threshold on a switch interface
Rx RoCE no buffer discardTCA_RX_ROCE_NO_BUFFER_DISCARDRate of Rx RoCE no buffer discard exceeded user-defined maximum threshold on a switch interface
Rx RoCE PG usageTCA_RX_ROCE_PG_USAGE_CELLSPercentage of Rx RoCE PG usage exceeded user-defined maximum threshold on a switch interface
Rx RoCE PFC pause durationTCA_RX_ROCE_PFC_PAUSE_DURATIONNumber of Rx RoCE PFC pause duration exceeded user-defined maximum threshold on a switch interface
Rx RoCE PFC pause packetsTCA_RX_ROCE_PFC_PAUSE_PACKETSRate of Rx RoCE PFC pause packets exceeded user-defined maximum threshold on a switch interface
Tx CNP buffer usageTCA_TX_CNP_BUFFER_USAGE_CELLSPercentage of Tx General+CNP buffer usage exceeded user-defined maximum threshold on a switch interface
Tx CNP TC usageTCA_TX_CNP_TC_USAGE_CELLSPercentage of Tx CNP TC usage exceeded user-defined maximum threshold on a switch interface
Tx CNP unicast no buffer discardTCA_TX_CNP_UNICAST_NO_BUFFER_DISCARDRate of Tx CNP unicast no buffer discard exceeded user-defined maximum threshold on a switch interface
Tx ECN marked packetsTCA_TX_ECN_MARKED_PACKETSRate of Tx Port ECN marked packets exceeded user-defined maximum threshold on a switch interface
Tx RoCE buffer usageTCA_TX_ROCE_BUFFER_USAGE_CELLSPercentage of Tx RoCE buffer usage exceeded user-defined maximum threshold on a switch interface
Tx RoCE PFC pause durationTCA_TX_ROCE_PFC_PAUSE_DURATIONNumber of Tx RoCE PFC pause duration exceeded user-defined maximum threshold on a switch interface
Tx RoCE PFC pause packetsTCA_TX_ROCE_PFC_PAUSE_PACKETSRate of Tx RoCE PFC pause packets exceeded user-defined maximum threshold on a switch interface
Tx RoCE TC usageTCA_TX_ROCE_TC_USAGE_CELLSPercentage of Tx RoCE TC usage exceeded user-defined maximum threshold on a switch interface
Tx RoCE unicast no buffer discardTCA_TX_ROCE_UNICAST_NO_BUFFER_DISCARDRate of Tx RoCE unicast no buffer discard exceeded user-defined maximum threshold on a switch interface

Sensors

NetQ UI NameNetQ CLI Event IDDescription
Fan speedTCA_SENSOR_FAN_UPPERFan speed exceeded user-defined maximum threshold on a switch
Power supply wattsTCA_SENSOR_POWER_UPPERPower supply output exceeded user-defined maximum threshold on a switch
Power supply voltsTCA_SENSOR_VOLTAGE_UPPERPower supply voltage exceeded user-defined maximum threshold on a switch
Switch temperatureTCA_SENSOR_TEMPERATURE_UPPERTemperature (° C) exceeded user-defined maximum threshold on a switch

What Just Happened

NetQ UI NameNetQ CLI Event IDDrop TypeReason/Port Down ReasonDescription
ACL drop aggregate upperTCA_WJH_ACL_DROP_AGG_UPPERACLEgress port ACLACL action set to deny on the physical egress port or bond
ACL drop aggregate upperTCA_WJH_ACL_DROP_AGG_UPPERACLEgress router ACLACL action set to deny on the egress switch virtual interfaces (SVIs)
ACL drop aggregate upperTCA_WJH_ACL_DROP_AGG_UPPERACLIngress port ACLACL action set to deny on the physical ingress port or bond
ACL drop aggregate upperTCA_WJH_ACL_DROP_AGG_UPPERACLIngress router ACLACL action set to deny on the ingress switch virtual interfaces (SVIs)
Buffer drop aggregate upperTCA_WJH_BUFFER_DROP_AGG_UPPERBufferPacket Latency Threshold CrossedTime a packet spent within the switch exceeded or dropped below the specified high or low threshold
Buffer drop aggregate upperTCA_WJH_BUFFER_DROP_AGG_UPPERBufferPort TC Congestion Threshold CrossedPercentage of the occupancy buffer exceeded or dropped below the specified high or low threshold
Buffer drop aggregate upperTCA_WJH_BUFFER_DROP_AGG_UPPERBufferTail dropTail drop is enabled, and buffer queue is filled to maximum capacity
Buffer drop aggregate upperTCA_WJH_BUFFER_DROP_AGG_UPPERBufferWREDWeighted Random Early Detection is enabled, and buffer queue is filled to maximum capacity or the RED engine dropped the packet as of random congestion prevention
CRC error upperTCA_WJH_CRC_ERROR_UPPERL1Auto-negotiation failureNegotiation of port speed with peer has failed
CRC error upperTCA_WJH_CRC_ERROR_UPPERL1Bad signal integrityIntegrity of the signal on port is not sufficient for good communication
CRC error upperTCA_WJH_CRC_ERROR_UPPERL1Cable/transceiver is not supportedThe attached cable or transceiver is not supported by this port
CRC error upperTCA_WJH_CRC_ERROR_UPPERL1Cable/transceiver is unpluggedA cable or transceiver is missing or not fully inserted into the port
CRC error upperTCA_WJH_CRC_ERROR_UPPERL1Calibration failureCalibration failure
CRC error upperTCA_WJH_CRC_ERROR_UPPERL1Link training failureLink is not able to go operational up due to link training failure
CRC error upperTCA_WJH_CRC_ERROR_UPPERL1Peer is sending remote faultsPeer node is not operating correctly
CRC error upperTCA_WJH_CRC_ERROR_UPPERL1Port admin downPort has been purposely set down by user
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERL2Destination MAC is reserved (DMAC=01-80-C2-00-00-0x)The address cannot be used by this link
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERL2Ingress spanning tree filterPort is in Spanning Tree blocking state
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERL2Ingress VLAN filteringFrames whose port is not a member of the VLAN are discarded
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERL2MLAG port isolationNot supported for port isolation implemented with system ACL
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERL2Multicast egress port list is emptyNo ports are defined for multicast egress
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERL2Port loopback filterPort is operating in loopback mode; packets are being sent to itself (source MAC address is the same as the destination MAC address
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERL2Unicast MAC table action discardCurrently not supported
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERL2VLAN tagging mismatchVLAN tags on the source and destination do not match
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterBlackhole ARP/neighborPacket received with blackhole adjacency
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterBlackhole routePacket received with action equal to discard
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterChecksum or IPver or IPv4 IHL too shortCannot read packet due to header checksum error, IP version mismatch, or IPv4 header length is too short
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterDestination IP is loopback addressCannot read packet as destination IP address is a loopback address (dip=>127.0.0.0/8)
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterEgress router interface is disabledPacket destined to a different subnet cannot be routed because egress router interface is disabled
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterIngress router interface is disabledPacket destined to a different subnet cannot be routed because ingress router interface is disabled
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterIPv4 destination IP is link localPacket has IPv4 destination address that is a local link (destination in 169.254.0.0/16)
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterIPv4 destination IP is local network (destination=0.0.0.0/8)Packet has IPv4 destination address that is a local network (destination=0.0.0.0/8)
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterIPv4 routing table (LPM) unicast missNo route available in routing table for packet
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterIPv4 source IP is limited broadcastPacket has broadcast source IP address
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterIPv6 destination in multicast scope FFx0:/16Packet received with multicast destination address in FFx0:/16 address range
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterIPv6 destination in multicast scope FFx1:/16Packet received with multicast destination address in FFx1:/16 address range
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterIPv6 routing table (LPM) unicast missNo route available in routing table for packet
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterMulticast MAC mismatchFor IPv4, destination MAC address is not equal to {0x01-00-5E-0 (25 bits), DIP[22:0]} and DIP is multicast. For IPv6, destination MAC address is not equal to {0x3333, DIP[31:0]} and DIP is multicast
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterNon IP packetCannot read packet header because it is not an IP packet
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterNon-routable packetPacket has no route in routing table
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterPacket size is larger than router interface MTUPacket has larger MTU configured than the VLAN
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterRouter interface loopbackPacket has destination IP address that is local. For example, SIP = 1.1.1.1, DIP = 1.1.1.128.
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterSource IP equals destination IPPacket has a source IP address equal to the destination IP address
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterSource IP is in class ECannot read packet as source IP address is a Class E address
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterSource IP is loopback addressCannot read packet as source IP address is a loopback address ( ipv4 => 127.0.0.0/8 for ipv6 => ::1/128)
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterSource IP is multicastCannot read packet as source IP address is a multicast address (ipv4 SIP => 224.0.0.0/4)
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterSource IP is unspecifiedCannot read packet as source IP address is unspecified (ipv4 = 0.0.0.0/32; for ipv6 = ::0)
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterTTL value is too smallPacket has TTL value of 1
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterUnicast destination IP but multicast destination MACCannot read packet with IP unicast address when destination MAC address is not unicast (FF:FF:FF:FF:FF:FF)
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERRouterUnresolved neighbor/next-hopThe next hop in the route is unknown
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERTunnelDecapsulation errorDecapsulation produced incorrect format of packet. For example, encapsulation of packet with many VLANs or IP options on the underlay can cause de-capsulation to result in a short packet.
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERTunnelOverlay switch - Source MAC equals destination MACOverlay packet’s source MAC address is the same as the destination MAC address
Drop aggregate upperTCA_WJH_DROP_AGG_UPPERTunnelOverlay switch - Source MAC is multicastOverlay packet’s source MAC address is multicast
Symbol error upperTCA_WJH_SYMBOL_ERROR_UPPERL1Auto-negotiation failureNegotiation of port speed with peer has failed
Symbol error upperTCA_WJH_SYMBOL_ERROR_UPPERL1Bad signal integrityIntegrity of the signal on port is not sufficient for good communication
Symbol error upperTCA_WJH_SYMBOL_ERROR_UPPERL1Cable/transceiver is not supportedThe attached cable or transceiver is not supported by this port
Symbol error upperTCA_WJH_SYMBOL_ERROR_UPPERL1Cable/transceiver is unpluggedA cable or transceiver is missing or not fully inserted into the port
Symbol error upperTCA_WJH_SYMBOL_ERROR_UPPERL1Calibration failureCalibration failure
Symbol error upperTCA_WJH_SYMBOL_ERROR_UPPERL1Link training failureLink is not able to go operational up due to link training failure
Symbol error upperTCA_WJH_SYMBOL_ERROR_UPPERL1Peer is sending remote faultsPeer node is not operating correctly
Symbol error upperTCA_WJH_SYMBOL_ERROR_UPPERL1Port admin downPort has been purposely set down by user