layout-3layout-6layout-1layout-top
NVIDIA Docs Hub   NVIDIA Networking   Networking Software  

Technical Guides

layout-toplayout-6layout-1

Use Cases and Recommendations

In the world of data center automation and deployment, Day 0, Day 1, Day 2 and Day N are widely used terms to determine the stage of the device configuration and usage. The classification determines when the configurations are applied.

  • Day 0 configuration is the initial minimal configuration with which the switch starts up, based on the topology and network architecture that has been designed.
  • Day 1 configuration includes setting up common services like NTP, syslog, and so on.
  • Day 2 to Day N are the configurations you push to the device for day-to-day operations. This also includes patching and upgrading based on the changing needs of the environment.

Automation Options

OptionsRecommendations
Flat file automationYou must explicitly tell NVUE to ignore flat files pushed with automation methods outside of NVUE.
REST API driven automationNVUE is one hundred percent API driven and all features are accessible with the API. You can use the API for automation by any tool or script that can interacts with REST, such as Ansible, Python, Postman, and so on.
NVUE configuration file automationYou can automate and apply the startup.yaml file. You can do this today using PRA, as mentioned above.

Integrate with Existing Tools

ToolsRecommendation
AnsibleFor Day 0 configurations, you can use the PRA package to automate startup.yaml file generation or use the Ansible modules to set up the configuration as desired and run it across all the switches.
For Day 1 through day N configurations, you can leverage the Ansible modules that are available to make configuration changes on the go.
SaltFor Day 0 configurations, you can automate startup.yaml file generation.
For Day 1 through day N configurations, you can automate startup.yaml file updates and apply them on the switches.
PuppetFor Day 0 configurations, you can automate startup.yaml file generation.
For Day 1 through day N configurations, you can use the http_request module to interact with NVUE API.
ScriptsMost programming languages support making REST API calls. Use the RESTful NVUE API to integrate into your existing automation scripts.

Code Snippets

Using the REST API to make any updates (PATCH) is a multi step process:

  1. Create a new revision ID.
  2. Make the change using a PATCH request against the revision ID recorded in the previous step.
  3. Apply the changes to the revision changeset.
  4. Review the status of the applied revision. This step is optional.

You can combine multiple PATCH requests into one revision.

You can change configuration settings either at the root level or the object level. With a root patch, you can push all configurations to the switch in bulk. With a targeted configuration patch, you can control individual resources.

The examples below use curl. You can use any tool or programming language.

Revisions

  1. View the current applied configuration.

    curl -u 'cumulus:CumulusLinux!' -k -X GET "https://127.0.0.1:8765/nvue_v1/?rev=applied&filled=false" 

    "acl": {}, 
  "bridge": { 
    "domain": { 
      "br_default": { 
        "encap": "802.1Q", 
        "mac-address": "auto", 
        "multicast": { 
          "snooping": { 
            "enable": "off" 
          } 
        }, 
        "stp": { 
          "priority": 32768, 
          "state": { 
            "up": {} 
          } 
        }, 
        "type": "vlan-aware", 
        "untagged": 1, 
        "vlan": { 
          "10": { 
            "multicast": { 
              "snooping": { 
                "querier": { 
                  "source-ip": "0.0.0.0" 
                } 
              } 
            }, 
            "ptp": { 
              "enable": "off" 
            }, 
            "vni": { 
              "10": { 
                "flooding": { 
                  "enable": "auto" 
                }, 
                "mac-learning": "auto" 
              } 
.... 

    cumulus@switch:~$ nv config show

  2. Create a new revision ID.

    curl -u 'cumulus:CumulusLinux!' -k -X POST https://127.0.0.1:8765/nvue_v1/revision

    { 

"changeset/cumulus/2023-04-06_20.22.44_T2XP": { 
    "state": "pending", 
    "transition": { 
      "issue": {}, 
      "progress": "" 
    } 
} 
}

  3. Apply the revision changeset after you push all the configurations.

    Cumulus Linux applies but does not save the configuration; the configuration does not persist after a reboot.

    curl -u 'cumulus:CumulusLinux!' -d '{"state":"apply","auto-prompt":{"ays":"ays_yes"}}' -H 'Content-Type:application/json' -k -X PATCH https://127.0.0.1:8765/nvue_v1/revision/changeset%2Fcumulus%2F2023-04-06_20.22.44_T2XP

    { 
  "state": "apply", 
  "transition": { 
    "issue": {}, 
    "progress": "" 
  } 
} 

    cumulus@switch:~$ nv config apply

  4. Review the revision.

    curl -u 'cumulus:CumulusLinux!' -k -X GET https://127.0.0.1:8765/nvue_v1/revision/changeset%2Fcumulus%2F2023-04-06_20.22.44_T2XP

    { 
  "state": "applied", 
  "transition": { 
    "issue": {}, 
    "progress": "" 
  } 
}

  5. Save a revision. Save an applied configuration change to the startup configuration (/etc/nvue.d/startup.yaml) so that the changes persist after a reboot.

    curl -u 'cumulus:CumulusLinux!' -k -X PATCH -d '{"state": "save", "auto-prompt": {"ays": "ays_yes"}}' -H 'Content-Type: application/json'  https://127.0.0.1:8765/nvue_v1/revision/applied 

    { 
  "state": "save", 
  "transition": { 
    "issue": {}, 
    "progress": "" 
  } 
} 

    cumulus@switch:~$ nv config save

Day 0 - Set Up Basic Connectivity

Interfaces

  1. Set the loopback interface IP address.

    curl -u 'cumulus:CumulusLinux!' -d '{"99.99.99.99/32": {}}' -H 'Content-Type: application/json' -k -X PATCH https://127.0.0.1:8765/nvue_v1/interface/lo/ip/address?rev=changeset%2Fcumulus%2F2023-04-06_20.22.44_T2XP

    {   
"99.99.99.99/32": {}  
}

    cumulus@switch:~$ nv set interface lo ip address 99.99.99.99/32

  2. Review the IP address after you apply the revision.

    curl -u 'cumulus:CumulusLinux!' -k -X GET https://127.0.0.1:8765/nvue_v1/interface/lo/ip/address

    {   
"127.0.0.1/8": {},   
"99.99.99.99/32": {}, 
"::1/128": {}  
}

    cumulus@switch:~$ nv show interface lo ip address

Day 1 - Set Up Common Services

System Hostname and time zone

curl -u 'cumulus:CumulusLinux!' -d '{"hostname":"switch01","timezone":"America/Los_Angeles"}' -k -X PATCH https://127.0.0.1:8765/nvue_v1/system?rev=changeset%2Fcumulus%2F2023-04-06_20.31.58_T2XR

{}  

cumulus@switch:~$ nv set system hostname switch01 
cumulus@switch:~$ nv set system timezone America/Los_Angeles

NTP

curl -u 'cumulus:CumulusLinux!' -d '{"default":{"server:{"4.cumulusnetworks.pool.ntp.org":{"iburst":"on"}}}}' -k -X PATCH https://127.0.0.1:8765/nvue_v1/service/ntp?rev=changeset%2Fcumulus%2F2023-04-06_20.31.58_T2XR

{} 

cumulus@switch:~$ nv set service ntp default server 4.cumulusnetworks.pool.ntp.org iburst on

DNS

curl -u 'cumulus:CumulusLinux!' -d '{"mgmt":{"server:{"192.168.1.100":{}}}}' -k -X PATCH https://127.0.0.1:8765/nvue_v1/service/dns?rev=changeset%2Fcumulus%2F2023-04-06_20.31.58_T2XR

{} 

cumulus@switch:~$ nv set service dns mgmt server 192.168.1.100

Syslog

curl -u 'cumulus:CumulusLinux!' -d '{"mgmt":{"server:{"192.168.1.120":{"port":8000}}}}' -k -X PATCH https://127.0.0.1:8765/nvue_v1/service/syslog?rev=changeset%2Fcumulus%2F2023-04-06_20.31.58_T2XR

{} 

cumulus@switch:~$ nv set service syslog mgmt server 192.168.1.120 port 8000

All services at the root level

curl -u 'cumulus:CumulusLinux!' -d '{"system": {"hostname":"switch01","timezone":"America/Los_Angeles"}, "service": { "ntp": {"default":{"server:{"4.cumulusnetworks.pool.ntp.org":{"iburst":"on"}}}}, "dns": {"mgmt":{"server:{"192.168.1.100":{}}}}, "syslog": {"mgmt":{"server:{"192.168.1.120":{"port":8000}}}}}}' -k -X PATCH https://127.0.0.1:8765/nvue_v1/?rev=changeset%2Fcumulus%2F2023-04-06_20.31.58_T2XR

{}

Day 2 through Day N - Setup Configuration

Bond

curl -u 'cumulus:CumulusLinux!' -d '{"bond0": {"type":"bond","bond":{"member":{"swp1":{},"swp2":{},"swp3":{},"swp4":{}}}}}' -H 'Content-Type: application/json' -k -X PATCH https://127.0.0.1:8765/nvue_v1/interface?rev=changeset%2Fcumulus%2F2023-04-06_21.08.10_T2XV

{ 
  "bond0": { 
    "bond": { 
      "member": { 
        "swp1": {}, 
        "swp2": {}, 
        "swp3": {}, 
        "swp4": {} 
      } 
    }, 
    "type": "bond" 
  }, 
  "bond1": { 
    "bond": { 
      "lacp-bypass": "on", 
      "member": { 
        "swp1": {} 
      }, 
      "mlag": { 
        "enable": "on", 
        "id": 1 
      }, 
      "mode": "lacp" 
    }, 
    "bridge": { 
      "domain": { 
        "br_default": { 
          "access": 10, 
          "stp": { 
            "admin-edge": "on", 
            "auto-edge": "on", 
            "bpdu-guard": "on" 
          } 
        } 
      } 
    }, 
    "link": { 
      "mtu": 9000 
    }, 
    "type": "bond" 
  }, 
  "eth0": { 
    "ip": { 
      "address": { 
        "192.168.200.6/24": {} 
      }, 
      "vrf": "mgmt" 
    }, 
    "type": "eth" 
  }, 
  "lo": { 
    "ip": { 
      "address": { 
        "10.10.10.1/32": {} 
      } 
    }, 
    "type": "loopback" 
  } 
}  

cumulus@switch:~$ nv set interface bond0 bond member swp1-4

Bridge

curl -u 'cumulus:CumulusLinux!' -d '{"swp1": {"bridge":{"domain":{"br_default":{}}},"swp2": {"bridge":{"domain":{"br_default":{}}}}' -H 'Content-Type: application/json' -k -X PATCH https://127.0.0.1:8765/nvue_v1/interface?rev=changeset%2Fcumulus%2F2023-04-06_21.08.10_T2X 

curl -u 'cumulus:CumulusLinux!' -d '{"untagged":1,"vlan":{"10":{},"20":{}}}' -H 'Content-Type: application/json' -k -X PATCH https://127.0.0.1:8765/nvue_v1/bridge/domain/br_default?rev=changeset%2Fcumulus%2F2023-04-06_21.08.10_T2XVResourcesResources

{} 

cumulus@switch:~$ nv set interface swp1-2 bridge domain br_default
cumulus@switch:~$ nv set bridge domain br_default vlan 10,20
cumulus@switch:~$ nv set bridge domain br_default untagged 1

Resources

    Copyright © 2024  NVIDIA Corporation