PTM
The nv unset commands remove the configuration you set with the equivalent nv set commands. This guide only describes an nv unset command if it differs from the nv set command.
nv set router ptm
Provides commands to configure PTM.
nv set router ptm enable
Turns PTM on or off. When on, PTM performs additional checks to ensure that routing adjacencies form only on links that have connectivity and that conform to the specification that the ptmd service defines. The default setting is off.
Version History
Introduced in Cumulus Linux 5.3.0
Example
cumulus@switch:~$ nv set router ptm enable on