PIM

nv show interface <interface-id> router pim

Shows PIM configuration for the specified interface.

Command Syntax

Syntax	Description
`<interface-id>`	The interface name.

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show interface vlan10 router pim
                            applied    
--------------------------  -----------
enable                      on         
active-active               off        
dr-priority                 1          
address-family                         
  ipv4-unicast                         
    multicast-boundary-oil  MyPrefixLis
    use-source              none       
    allow-rp                           
      enable                off        
bfd                                    
  enable                    off        
timers                                 
  hello-interval            auto

nv show interface <interface-id> router pim address-family

Shows PIM configuration settings for all address families for the specified interface.

Command Syntax

Syntax	Description
`<interface-id>`	The interface name.

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show interface vlan10 router pim address-family
                          applied    
------------------------  -----------
ipv4-unicast                         
  multicast-boundary-oil  MyPrefixLis
  use-source              none       
  allow-rp                           
    enable                off

nv show interface <interface-id> router pim address-family ipv4

Shows IPv4 PIM configuration settings for the specified interface.

Command Syntax

Syntax	Description
`<interface-id>`	The interface name.

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show interface vlan10 router pim address-family ipv4
                        applied    
----------------------  -----------
multicast-boundary-oil  MyPrefixLis
use-source              none       
allow-rp                           
  enable                off

nv show interface <interface-id> router pim address-family ipv4 allow-rp

Shows PIM allow RP configuration settings for IPv4 for the specified interface.

Command Syntax

Syntax	Description
`<interface-id>`	The interface name.

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show interface vlan10 router pim address-family ipv4 allow-rp
        applied
------  -------
enable  on

nv show interface <interface-id> router pim bfd

Shows PIM BFD configuration settings for the specified interface.

Command Syntax

Syntax	Description
`<interface-id>`	The interface name.

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show interface vlan10 router pim bfd
        applied
------  -------
enable  off

nv show interface <interface-id> router pim timers

Shows PIM timer settings for the specified interface.

Command Syntax

Syntax	Description
`<interface-id>`	The interface name.

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show interface vlan10 router pim timers
                applied
--------------  -------
hello-interval  auto

nv show router pim

Shows global PIM configuration on the switch.

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show router pim
                       applied
---------------------  -------
enable                 on     
packets                3      
timers                        
  hello-interval       30     
  join-prune-interval  100    
  keep-alive           10000  
  register-suppress    20000  
  rp-keep-alive        185

nv show router pim timers

Shows global PIM timer settings on the switch.

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show router pim timers
                     applied
-------------------  -------
hello-interval       30     
join-prune-interval  100    
keep-alive           10000  
register-suppress    20000  
rp-keep-alive        185

nv show vrf <vrf-id> router pim

Shows PIM configuration settings for the specified VRF.

Command Syntax

Syntax	Description
`<vrf-id>`	The VRF name.

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show vrf default router pim
                          applied         
------------------------  ----------------
enable                    on              
address-family                            
  ipv4-unicast                            
    register-accept-list  none            
    send-v6-secondary     on              
    ssm-prefix-list       MyCustomSSMrange
    [rp]                  10.10.10.101    
    spt-switchover                        
      action              infinity        
      prefix-list         SPTrange        
ecmp                                      
  enable                  on              
  rebalance               on              
timers                                    
  keep-alive              auto            
  rp-keep-alive           auto

nv show vrf <vrf-id> router pim address-family

Shows address family specific PIM configuration for the specified VRF.

Command Syntax

Syntax	Description
`<vrf-id>`	The VRF name.

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show vrf default router pim address-family
                       applied         
----------------------  ----------------
ipv4-unicast                            
  register-accept-list  none            
  send-v6-secondary     on              
  ssm-prefix-list       MyCustomSSMrange
  [rp]                  10.10.10.101    
  spt-switchover                        
    action              infinity        
    prefix-list         SPTrange

nv show vrf <vrf-id> router pim address-family ipv4

Shows IPv4 PIM configuration for the specified VRF.

Command Syntax

Syntax	Description
`<vrf-id>`	The VRF name.

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show vrf default router pim address-family ipv4
                      applied         
--------------------  ----------------
register-accept-list  none            
send-v6-secondary     on              
ssm-prefix-list       MyCustomSSMrange
[rp]                  10.10.10.101    
spt-switchover                        
  action              infinity        
  prefix-list         SPTrange

nv show vrf <vrf-id> router pim address-family ipv4 rp <rp-id>

Shows IPv4 PIM configuration settings for a specific RP for the specified VRF.

Command Syntax

Syntax	Description
`<vrf-id>`	The VRF name.
`<rp-id>`	RP IP address

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show vrf default router pim address-family ipv4 rp 10.10.10.101
               applied    
-------------  -----------
[group-range]  224.0.0.0/4

nv show vrf <vrf-id> router pim address-family ipv4 rp <rp-id> group-range

Shows the group ranges for the IPv4 PIM RP for the specified VRF.

Command Syntax

Syntax	Description
`<vrf-id>`	The VRF name.
`<rp-id>`	RP IP address

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show vrf default router pim address-family ipv4 rp 10.100.100.100 group-range

nv show vrf <vrf-id> router pim address-family ipv4 rp <rp-id> group-range <group-range-id>

Shows IPv4 PIM configuration settings for a specific RP group range for the specified VRF.

Command Syntax

Syntax	Description
`<vrf-id>`	The VRF name.
`<rp-id>`	RP IP address
`<group-range-id>`	The group range associated with the RP.

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show vrf default router pim address-family ipv4 rp 10.100.100.100 group-range 224.0.0.0/4

nv show vrf <vrf-id> router pim address-family ipv4 spt-switchover

Shows IPv4 PIM SPT switchover configuration for the specified VRF.

Command Syntax

Syntax	Description
`<vrf-id>`	The VRF name.

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show vrf default router pim address-family ipv4 spt-switchover
             applied 
-----------  --------
action       infinity
prefix-list  SPTrange

nv show vrf <vrf-id> router pim ecmp

Shows PIM ECMP settings for the specified VRF.

Command Syntax

Syntax	Description
`<vrf-id>`	The VRF name.

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show vrf default router pim ecmp
           applied
---------  -------
enable     on     
rebalance  on

nv show vrf <vrf-id> router pim msdp-mesh-group

Shows the MSDP mesh groups for the specified VRF.

Command Syntax

Syntax	Description
`<vrf-id>`	The VRF name.

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show vrf default router pim msdp-mesh-group

nv show vrf <vrf-id> router pim msdp-mesh-group <msdp-mesh-group-id>

Shows specific MSDP mesh group information for the specified VRF.

Command Syntax

Syntax	Description
`<vrf-id>`	The VRF name.
`<msdp-mesh-group-id>`	The MSDP mesh group name.

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show vrf default router pim msdp-mesh-group pod1

nv show vrf <vrf-id> router pim msdp-mesh-group <msdp-mesh-group-id> member-address

Shows the MSDP mesh group members for the specified VRF.

Command Syntax

Syntax	Description
`<vrf-id>`	The VRF name.
`<msdp-mesh-group-id>`	The MSDP mesh group name.

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show vrf default router pim msdp-mesh-group pod1 member-address

nv show vrf <vrf-id> router pim msdp-mesh-group <msdp-mesh-group-id> member-address <mesh-member-id>

Shows information about the specified MSDP mesh group member for the specified VRF.

Command Syntax

Syntax	Description
`<vrf-id>`	The VRF name.
`<msdp-mesh-group-id>`	The MSDP mesh group name.
`<mesh-member-id>`	The IP address of the MSDP mesh group member.

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show vrf default router pim msdp-mesh-group pod1 member-address 10.1.10.102

nv show vrf <vrf-id> router pim timers

Shows PIM timer settings for the specified VRF.

Command Syntax

Syntax	Description
`<vrf-id>`	The VRF name.

Version History

Introduced in Cumulus Linux 5.0.0

Example

cumulus@switch:~$ nv show vrf default router pim timers
               applied
-------------  -------
keep-alive     auto   
rp-keep-alive  auto