image image image image image

On This Page

ib managed-switch ahx-monitor enable


ib managed-switch ahx-monitor enable
no ib managed-switch ahx-monitor enable

Enables AHX monitoring.
The no form of the command disables AHX monitoring.

Syntax DescriptionN/A
DefaultN/A
Configuration Modeconfig
History4.2
Example
ufmapl [ mgmt-ha-active ] (config) # ib managed-switch ahx-monitor enable
Related Commands

show ib managed-switch ahx-monitor

Notes

managed-switch ahx-monitor interval


ib managed-switch ahx-monitor interval <time>
no ib managed-switch ahx-monitor interval

Configures AHX monitoring interval.
The no form of the command resets the AHX monitoring interval to default.

Syntax DescriptiontimeMonitoring interval values:
1m – 1 minute
5m – 5 minutes
10m – 10 minutes
15m – 15 minutes
20m – 20 minutes
30m – 30 minutes
1h – 1 hour
2h – 2 hours
3h – 3 hours
4h – 4 hours
6h – 6 hours
8h – 8 hours
12h – 12 hours
24h – 24 hours
Default1m
Configuration Modeconfig
History4.2
Example
ufmapl [ mgmt-ha-active ] (config) # ib managed-switch ahx-monitor interval 10m
Related Commands

show ib managed-switch ahx-monitor

Notes

ib managed-switch ahx-monitor device


ib managed-switch ahx-monitor device <switch-name> <ip | ipv6> <primary-ip-address> <secondary-ip-address> [<AHX alternative switch name>]
no ib managed-switch ahx-monitor device <switch-name>

Adds AHX device to monitoring.
The no form of the command removes AHX device from monitoring.

Syntax Descriptionswitch-nameAHX switch name
alternative-switch-nameAHX alternative switch name
ip | ipv6Sets IPv4/IPv6 addresses for this device
primary-ip-addressAHX primary IP address
secondary-ip-addressAHX secondary IP address
Default
Configuration Modeconfig
History4.2
Example
ufmapl [ mgmt-ha-active ] (config) # ib managed-switch ahx-monitor device ahx_switch01 ip 10.10.10.10 10.10.10.11
Related Commands

show ib managed-switch ahx-monitor

Notes

show ib managed-switch ahx-monitor


show ib managed-switch ahx-monitor

Displays AHX monitoring settings.

Syntax DescriptionN/A
DefaultN/A
Configuration ModeAny configuration mode
History4.2
Example
ufmapl [ mgmt-ha-active ] (config) # show ib managed-switch ahx-monitor
  AHX Monitoring:
    Enabled : Yes
    Interval: 10m

  AHX Devices:
    Switch name         : ahx_switch01
    Primary IP address  : 10.1.1.11
    Secondary IP address: 10.1.2.11
Related Commands

ib managed-switch ahx-monitor enable
managed-switch ahx-monitor interval
ib managed-switch ahx-monitor device

Notes