image image image image image

On This Page

ib hca-smp-window


ib hca-smp-window <value>
no ib hca-smp-window

Sets the maximum number of SMPs sent in HCA.
The no form of the command resets this parameter to its default.

Syntax DescriptionvalueRange: 0-256
Default128
Configuration Modeconfig
History4.4.0
Example
UFM-APL [ mgmt-ha-active ] (config) # ib hca-smp-window 128
Related Commands

show ib hca-smp-window

Notes

UFM system must be rebooted to apply the new configuration

ib hca-vl15-window


ib hca-vl15-window <value>
no ib hca-vl15-window

Sets the HCA VL15 port receive buffer size.
The no form of the command resets this parameter to its default.

Syntax Descriptionvalue1,2,4,8,16,32,64,128
Default1
Configuration Modeconfig
History4.4.0
Example
UFM-APL [ mgmt-ha-active ] (config) # ib hca-vl15-window 1
Related Commands

show ib hca-vl15-window

Notes

UFM system must be rebooted to apply the new configuration

ufm hca-grouping enable


ufm hca-grouping enable
no ufm hca-grouping enable

Enables HCA grouping.
The no form of the command disables HCA grouping.

Syntax DescriptionN/A
DefaultDisabled
Configuration Modeconfig
History4.5.0
Example
UFM-APL [ mgmt-ha-active ] (config) # ufm hca-grouping enable 
WARNING. Enabling multi-NIC grouping will cause reset of
your fabric network configuration (PKEY and QoS configuration).
You will have to redefine your network PKEYs and QoS configuration 
(PKEY->GUIDs and QoS->GUIDs association) after applying the script. 
Are you sure you wish to proceed? [yes/no] yes
Related Commands

show ufm hca-grouping

Notes

To use this capability, it is recommended for users to use this command after performing software upgrade.

show ib hca-smp-window


show ib hca-smp-window

Displays the configured maximum number of SMPs sent in HCA.

Syntax DescriptionN/A
DefaultN/A
Configuration ModeAny configuration mode
History4.4.0
Example
UFM-APL [ mgmt-ha-active ] (config) # show ib hca-smp-window
Running configuration: 128
User configuration:    256
Please reload machine to load new configurations.
Related Commands

ib hca-smp-window

Notes

The example shows an instance where the system has not been rebooted after implementing new configuration

show ib hca-vl15-window


show ib hca-vl15-window

Displays the configured HCA VL15 port receive buffer size.

Syntax DescriptionN/A
DefaultN/A
Configuration ModeAny configuration mode
History4.4.0
Example
UFM-APL [ mgmt-ha-active ] (config) # show ib hca-vl15-window
Running configuration: 1
User configuration:    64
Please reload machine to load new configurations.
Related Commands

ib hca-vl15-window

Notes

The example shows an instance where the system has not been rebooted after implementing new configuration

show ufm hca-grouping


show ufm hca-grouping

Displays UFM HCA grouping configuration.

Syntax DescriptionN/A
DefaultN/A
Configuration ModeAny configuration mode
History4.5.0
Example
UFM-APL [ mgmt-ha-active ] (config) # show ufm hca-grouping 
  HCA grouping: Yes
Related Commands

ufm hca-grouping enable

Notes