ufm ha configure
ufm ha [ipv6] configure <peer-ip> <virtual-ip> [interface] Applies HA configuration. | ||
| Syntax Description | peer-ip | Management IP address of peer machine |
| virtual-ip | Virtual IP used for accessing the active (master) machine | |
| interface | Sets the working interface. The interface can be eth0...eth3, if no interface is assigned, eth0 is assumed to be the chosen interface. | |
| Default | N/A | |
| Configuration Mode | config | |
| History | 1.5 | |
| 1.6 | Added the "interface" parameter | |
| Example | ufmapl [ mgmt-sa ] (config) # ufm ha configure 172.30.30.24 172.30.30.100 Please enter admin password for peer machine: ***** Configuring high availability, please wait... High availability is now configured. Please wait a few minutes for UFM machines to synchronize the configuration partition (DRBD). Please make sure all local UFM users on both machines have the same capabilities and passwords. | |
| Related Commands | ||
| Notes | ||
ufm ha configure dual-subnet
ufm ha [ipv6] configure dual-subnet <local-ip> <peer-ip> <interface> Applies HA configuration for dual-subnet. | ||
| Syntax Description | local-ip | Management IP address of the local machine |
| peer-ip | Management IP address of peer machine | |
| interface | Sets the working interface. The interface can be eth0...eth3, if no interface is assigned, eth0 is assumed to be the chosen interface. | |
| Default | N/A | |
| Configuration Mode | config | |
| History | 4.1.5 | |
| Example | ufmapl [ mgmt-sa ] (config) # ufm ha ipv6 configure dual-subnet fcfc:fcfc:209:36:21e:67ff:fe49:ce2a fcfc:fcfc:209:32:21e:67ff:fe4f:483a eth1 | |
| Related Commands | ||
| Notes | ||
ufm ha
ufm ha [failover | takeover] Performs High Availability failover/takeover operations. | ||
| Syntax Description | failover | Failover can be performed only on master (active) machine |
| takeover | Takeover can be performed only on slave (standby) machine | |
| Default | N/A | |
| Configuration Mode | config | |
| History | 1.5 | |
| Example | ufmapl [ mgmt-sa ] (config) # ufm ha takeover | |
| Related Commands | ||
| Notes | ||
