image image image image image

On This Page

ib partition management defmember


ib partition management defmember <type>
no ib partition management defmember

Sets the default membership for the management IB partition (default PKEY). The no form of the command resets the parameter to its default value.

Syntax Descriptiontype
  • full – full membership
  • limited – limited membership
  • both – both full and limited membership
DefaultFull membership
Configuration Modeconfig
History1.6
Example
UFM-APL [ mgmt-ha-active ] (config) # ib partition management defmember limited
Related Commands

show ib partition

Notes
  • The defmember setting controls the ability of end nodes to communicate over the management partition
  • It is not possible to modify the defmember in case OpenSM or UFM are running

show ib partition


show ib partition

Displays partition information.

Syntax DescriptionN/A
DefaultN/A
Configuration ModeAny configuration mode
History1.6
Example
UFM-APL [ mgmt-ha-active ] (config) # show ib partition

  management:     
  Default membership: full
  MTU limit:          2KB
Related Commands

ib partition management defmember

NotesN/A

ib partition management mtu-limit <2K|4K>


ib partition management mtu-limit <2K|4K>
no ib partition management mtu-limit <2K|4K>

Sets the MTU limit for the default partition. The no form of the command reset the MTU limit for the default partition to default.

Syntax Description

mtu-limit

2K|4K
Default
Configuration Modeconfig
History4.12.0
Example
UFM-APL [ mgmt-ha-active ] (config) # no ib partition management mtu-limit 4K
Related Commands

N/A

NotesN/A