The following table describes the management features available on supported devices.
| Feature | 10 Gb Ethernet Gateway Module | Grid Director 4700/ 4200/ 4036/ 4036E v3.5 | Managed IS5000 Switchesv | Managed SX6000 Switches | Externally Managed IS5000 / SX6000 Switches | Gateway BX5020 | HP C-Class | Linux Hosts | Windows Hosts |
|---|---|---|---|---|---|---|---|---|---|
| Discovery | |||||||||
IB L2 Discovery | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Advanced Discovery (IP, hostname, Hosts: CPU, memory, FW version) | Yes | Yes | No | Yes | No | No | No | Yes with UFM Host Agent | No |
Ethernet access Management interface | Yes | Yes | Yes | Yes | No | No | No | Yes | Yes |
Provisioning/ Configuration | |||||||||
IB Partitioning (pkey) | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
QoS: SL (SM configuration) | N/A | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
QoS: Rate Limit (SM configuration) | N/A | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Interface/VIF Configuration (IP, hostname, mtu, Bonding) | N/A | N/A | N/A | N/A | N/A | No | N/A | Yes with UFM Host Agent | No |
| Device Monitoring | |||||||||
Device Resources: CPU, Memory, Disk | No | Yes | No | No | No | No | No | Yes with UFM Host Agent | No |
Get device alerts (Temperature, PS, Fan) Note: This feature is not supported on Switch-X switches. | Yes | Yes | No | Yes | Yes | No | No | No | No |
L1 (Physical Port) –Monitoring | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
L2-3 (Interface/VIF) –Monitoring | No | No | No | No | No | No | No | Yes with UFM Host Agent | No |
Congestion Monitoring per port (enables congestion map) | No | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Congestion Monitoring per flow (Advanced Package) | No | Yes | No | No | No | No | No | No | No |
| Device Management | |||||||||
Add/remove to/from Rack | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Add/remove to/from Logical Server | N/A | N/A | N/A | N/A | N/A | N/A | N/A | Yes | Yes |
View/clear Alarms | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
SSH terminal to device | Yes | Yes | Yes | Yes | No | No | No | Yes | Yes |
Power On | No | No | No | No | No | No | No | Yes with IPMI | No |
Reboot | No | No | No | Yes (SX3606 only) | No | No | No | Yes with IPMI | No |
Shutdown | No | No | No | No | No | No | No | Yes with IPMI | No |
Port Enable/Disable | No | Yes | Yes | Yes | Yes | Yes | Yes | Yes | Yes |
Firmware Upgrade (HCA & switch) | No | Yes | No | Yes (Upon SW upgrade – SX6036 only) | No | No | No | Yes | No |
Inband Firmware Upgrade (over InfiniBand connection) | No | No | No | No | Yes | No | No | Yes | Yes |
Software Upgrade (OFED & switch) | No | Yes | No | Yes (SX3606 only) | No | No | No | Yes with UFM Host Agent | No |
| Protocols | |||||||||
Communication UFM Server – Device | IB/SNMP | IB/UDP | IB | IB/HTTP/ SSH | IB | IB | IB | IB, SSH, IPMI, UDP | IB |
- For a full list of supported IS5000 switches, see Supported IS5000 Switches.
- QoS Rate Limit (SM configuration): On ConnectX HCAs-only, for hosts.
- XmitWait counter monitoring requires ConnectX HCAs with firmware version 2.6 and above.
- This feature requires that the IP address is configured.
