> This page is for NVIDIA Studio Voice on Holoscan for Media, version 1.2.0 (Latest) (default).
> For other versions, use one of these documentation indexes:
> - 1.2.0 (Latest) (default): https://docs.nvidia.com/nim/maxine/studio-voice-h4m/1.2.0/llms.txt

> For clean Markdown of any page, append .md to the page URL.
> For a complete documentation index, see https://docs.nvidia.com/nim/maxine/llms.txt.

# Verification

After the sample chart is deployed, the end-to-end demo can be verified by confirming that the pipeline is healthy and that audio output from the receiver can be heard in VLC (or another SRT client). A preview stream is exposed by the receiver over SRT; the cluster's node address and the service or NodePort mapped to the receiver's SRT port should be taken from your Helm values.

---

## Open an SRT Stream in VLC

The following steps are performed:

1. **Start VLC media player**.
2. Select **Media** → **Open Network Stream** (or **Open Network**).
3. In the **URL** field, enter an SRT URL in the following form:

   ```text
   srt://<node-of-pod>:<port>
   ```

   - `<node-of-pod>` is the Kubernetes or OpenShift node address on which the SRT listener is exposed.
   - `<port>` is the mapped port for the receiver's SRT preview.

Obtain a node IP address for the SRT URL as follows:

```bash
oc get node -o wide
```

On plain Kubernetes, use `kubectl get node -o wide` instead of `oc`.

The **INTERNAL-IP** (or another address that is routable from the machine on which VLC is run) is used together with the external or NodePort value configured for the receiver's SRT preview.

**Example**

```text
srt://<internal-ip>:<external-srt-port>
```

Follow the same address pattern as in [View Output via SRT](/nim/maxine/studio-voice-h4m/installation/studio-voice-h4m-sample#view-output-via-srt) for your release and environment.

After playback is established, the preview should be similar to the following image. The enhanced audio waveform is visible in the VLC audio visualizer.

![VLC preview with Studio Voice enhanced audio](/nim/maxine/_fern-files/_img/c193bee657e849b48d3a53859a069f5ad5c5c2f293d23b3c85d914adfd5a53ea.webp)

---

## NMOS Workflow

When the Helm charts are deployed with NMOS enabled, the sender, Studio Voice NIM service, and receiver are registered with the NMOS registry. In the NMOS Connection Manager UI, these components are listed under **Available**.

Each node is dragged from **Available** into the workspace; outputs are then connected to inputs so that media is routed **sender → NIM → receiver** in the order required by the deployment. The reference wiring is shown in the following diagram.

Connect receivers to the NIM *before* the sender is connected, so that audio is not accumulated in receiver queues. For more information, refer to [NMOS Mode](/nim/maxine/studio-voice-h4m/installation/studio-voice-h4m-service#nmos-mode) and [Recommended: Two-Phase Deploy](/nim/maxine/studio-voice-h4m/installation/studio-voice-h4m-sample#recommended-two-phase-deploy).

![NMOS Connection Manager workspace with sender, NIM, and receiver connections](/nim/maxine/_fern-files/_img/869fae01d39ee7c8f34d7bc6ff010a4bb2ecc302d2cf1d206c6d88171d345524.webp)

---

## See Also

- [End-to-End Demo Chart Installation](/nim/maxine/studio-voice-h4m/installation/studio-voice-h4m-sample) — SRT port mapping and receiver settings.
- [Pipeline Configuration](/nim/maxine/studio-voice-h4m/configuration/pipeline) — Model and pipeline tuning options.
- [Observability](/nim/maxine/studio-voice-h4m/observability) — Health checks and logs.