4.1. Device Management

CUDART_DEVICE

This section describes the device management functions of the CUDA runtime application programming interface.

Functions

__host__cudaError_t cudaChooseDevice ( int* device, const cudaDeviceProp* prop )
Select compute-device which best matches criteria.
__host____device__cudaError_t cudaDeviceGetAttribute ( int* value, cudaDeviceAttr attr, int  device )
Returns information about the device.
__host__cudaError_t cudaDeviceGetByPCIBusId ( int* device, const char* pciBusId )
Returns a handle to a compute device.
__host____device__cudaError_t cudaDeviceGetCacheConfig ( cudaFuncCache ** pCacheConfig )
Returns the preferred cache configuration for the current device.
__host____device__cudaError_t cudaDeviceGetLimit ( size_t* pValue, cudaLimit limit )
Returns resource limits.
__host__cudaError_t cudaDeviceGetP2PAttribute ( int* value, cudaDeviceP2PAttr attr, int  srcDevice, int  dstDevice )
Queries attributes of the link between two devices.
__host__cudaError_t cudaDeviceGetPCIBusId ( char* pciBusId, int  len, int  device )
Returns a PCI Bus Id string for the device.
__host____device__cudaError_t cudaDeviceGetSharedMemConfig ( cudaSharedMemConfig ** pConfig )
Returns the shared memory configuration for the current device.
__host__cudaError_t cudaDeviceGetStreamPriorityRange ( int* leastPriority, int* greatestPriority )
Returns numerical values that correspond to the least and greatest stream priorities.
__host__cudaError_t cudaDeviceReset ( void )
Destroy all allocations and reset all state on the current device in the current process.
__host__cudaError_t cudaDeviceSetCacheConfig ( cudaFuncCache cacheConfig )
Sets the preferred cache configuration for the current device.
__host__cudaError_t cudaDeviceSetLimit ( cudaLimit limit, size_t value )
Set resource limits.
__host__cudaError_t cudaDeviceSetSharedMemConfig ( cudaSharedMemConfig config )
Sets the shared memory configuration for the current device.
__host____device__cudaError_t cudaDeviceSynchronize ( void )
Wait for compute device to finish.
__host____device__cudaError_t cudaGetDevice ( int* device )
Returns which device is currently being used.
__host____device__cudaError_t cudaGetDeviceCount ( int* count )
Returns the number of compute-capable devices.
__host__cudaError_t cudaGetDeviceFlags ( unsigned int* flags )
Gets the flags for the current device.
__host__cudaError_t cudaGetDeviceProperties ( cudaDeviceProp* prop, int  device )
Returns information about the compute-device.
__host__cudaError_t cudaIpcCloseMemHandle ( void* devPtr )
Close memory mapped with cudaIpcOpenMemHandle.
__host__cudaError_t cudaIpcGetEventHandle ( cudaIpcEventHandle_t* handle, cudaEvent_t event )
Gets an interprocess handle for a previously allocated event.
__host__cudaError_t cudaIpcGetMemHandle ( cudaIpcMemHandle_t* handle, void* devPtr )
Gets an interprocess memory handle for an existing device memory allocation.
__host__cudaError_t cudaIpcOpenEventHandle ( cudaEvent_t* event, cudaIpcEventHandle_t handle )
Opens an interprocess event handle for use in the current process.
__host__cudaError_t cudaIpcOpenMemHandle ( void** devPtr, cudaIpcMemHandle_t handle, unsigned int  flags )
Opens an interprocess memory handle exported from another process and returns a device pointer usable in the local process.
__host__cudaError_t cudaSetDevice ( int  device )
Set device to be used for GPU executions.
__host__cudaError_t cudaSetDeviceFlags ( unsigned int  flags )
Sets flags to be used for device executions.
__host__cudaError_t cudaSetValidDevices ( int* device_arr, int  len )
Set a list of devices that can be used for CUDA.

Functions

__host__cudaError_t cudaChooseDevice ( int* device, const cudaDeviceProp* prop )
Select compute-device which best matches criteria.
Parameters
device
- Device with best match
prop
- Desired device properties
Description

Returns in *device the device which has properties that best match *prop.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaGetDeviceCount, cudaGetDevice, cudaSetDevice, cudaGetDeviceProperties

__host____device__cudaError_t cudaDeviceGetAttribute ( int* value, cudaDeviceAttr attr, int  device )
Returns information about the device.
Parameters
value
- Returned device attribute value
attr
- Device attribute to query
device
- Device number to query
Description

Returns in *value the integer value of the attribute attr on device device. The supported attributes are:

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaGetDeviceCount, cudaGetDevice, cudaSetDevice, cudaChooseDevice, cudaGetDeviceProperties, cuDeviceGetAttribute

__host__cudaError_t cudaDeviceGetByPCIBusId ( int* device, const char* pciBusId )
Returns a handle to a compute device.
Parameters
device
- Returned device ordinal
pciBusId
- String in one of the following forms: [domain]:[bus]:[device].[function] [domain]:[bus]:[device] [bus]:[device].[function] where domain, bus, device, and function are all hexadecimal values
Description

Returns in *device a device ordinal given a PCI bus ID string.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaDeviceGetPCIBusId, cuDeviceGetByPCIBusId

__host____device__cudaError_t cudaDeviceGetCacheConfig ( cudaFuncCache ** pCacheConfig )
Returns the preferred cache configuration for the current device.
Parameters
pCacheConfig
- Returned cache configuration
Description

On devices where the L1 cache and shared memory use the same hardware resources, this returns through pCacheConfig the preferred cache configuration for the current device. This is only a preference. The runtime will use the requested configuration if possible, but it is free to choose a different configuration if required to execute functions.

This will return a pCacheConfig of cudaFuncCachePreferNone on devices where the size of the L1 cache and shared memory are fixed.

The supported cache configurations are:

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaDeviceSetCacheConfig, cudaFuncSetCacheConfig ( C API), cudaFuncSetCacheConfig ( C++ API), cuCtxGetCacheConfig

__host____device__cudaError_t cudaDeviceGetLimit ( size_t* pValue, cudaLimit limit )
Returns resource limits.
Parameters
pValue
- Returned size of the limit
limit
- Limit to query
Description

Returns in *pValue the current size of limit. The supported cudaLimit values are:

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaDeviceSetLimit, cuCtxGetLimit

__host__cudaError_t cudaDeviceGetP2PAttribute ( int* value, cudaDeviceP2PAttr attr, int  srcDevice, int  dstDevice )
Queries attributes of the link between two devices.
Parameters
value
- Returned value of the requested attribute
attr
srcDevice
- The source device of the target link.
dstDevice
- The destination device of the target link.
Description

Returns in *value the value of the requested attribute attrib of the link between srcDevice and dstDevice. The supported attributes are:

  • CudaDevP2PAttrPerformanceRank: A relative value indicating the performance of the link between two devices. Lower value means better performance (0 being the value used for most performant link).

  • CudaDevP2PAttrAccessSupported: 1 if peer access is enabled.

  • CudaDevP2PAttrNativeAtomicSupported: 1 if native atomic operations over the link are supported.

Returns cudaErrorInvalidDevice if srcDevice or dstDevice are not valid or if they represent the same device.

Returns cudaErrorInvalidValue if attrib is not valid or if value is a null pointer.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaCtxEnablePeerAccess, cudaCtxDisablePeerAccess, cudaCtxCanAccessPeer, cuDeviceGetP2PAttribute

__host__cudaError_t cudaDeviceGetPCIBusId ( char* pciBusId, int  len, int  device )
Returns a PCI Bus Id string for the device.
Parameters
pciBusId
- Returned identifier string for the device in the following format [domain]:[bus]:[device].[function] where domain, bus, device, and function are all hexadecimal values. pciBusId should be large enough to store 13 characters including the NULL-terminator.
len
- Maximum length of string to store in name
device
- Device to get identifier string for
Description

Returns an ASCII string identifying the device dev in the NULL-terminated string pointed to by pciBusId. len specifies the maximum length of the string that may be returned.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaDeviceGetByPCIBusId, cuDeviceGetPCIBusId

__host____device__cudaError_t cudaDeviceGetSharedMemConfig ( cudaSharedMemConfig ** pConfig )
Returns the shared memory configuration for the current device.
Parameters
pConfig
- Returned cache configuration
Description

This function will return in pConfig the current size of shared memory banks on the current device. On devices with configurable shared memory banks, cudaDeviceSetSharedMemConfig can be used to change this setting, so that all subsequent kernel launches will by default use the new bank size. When cudaDeviceGetSharedMemConfig is called on devices without configurable shared memory, it will return the fixed bank size of the hardware.

The returned bank configurations can be either:

  • cudaSharedMemBankSizeFourByte - shared memory bank width is four bytes.

  • cudaSharedMemBankSizeEightByte - shared memory bank width is eight bytes.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaDeviceSetCacheConfig, cudaDeviceGetCacheConfig, cudaDeviceSetSharedMemConfig, cudaFuncSetCacheConfig, cuCtxGetSharedMemConfig

__host__cudaError_t cudaDeviceGetStreamPriorityRange ( int* leastPriority, int* greatestPriority )
Returns numerical values that correspond to the least and greatest stream priorities.
Parameters
leastPriority
- Pointer to an int in which the numerical value for least stream priority is returned
greatestPriority
- Pointer to an int in which the numerical value for greatest stream priority is returned
Description

Returns in *leastPriority and *greatestPriority the numerical values that correspond to the least and greatest stream priorities respectively. Stream priorities follow a convention where lower numbers imply greater priorities. The range of meaningful stream priorities is given by [*greatestPriority, *leastPriority]. If the user attempts to create a stream with a priority value that is outside the the meaningful range as specified by this API, the priority is automatically clamped down or up to either *leastPriority or *greatestPriority respectively. See cudaStreamCreateWithPriority for details on creating a priority stream. A NULL may be passed in for *leastPriority or *greatestPriority if the value is not desired.

This function will return '0' in both *leastPriority and *greatestPriority if the current context's device does not support stream priorities (see cudaDeviceGetAttribute).

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaStreamCreateWithPriority, cudaStreamGetPriority, cuCtxGetStreamPriorityRange

__host__cudaError_t cudaDeviceReset ( void )
Destroy all allocations and reset all state on the current device in the current process.
Returns

cudaSuccess

Description

Explicitly destroys and cleans up all resources associated with the current device in the current process. Any subsequent API call to this device will reinitialize the device.

Note that this function will reset the device immediately. It is the caller's responsibility to ensure that the device is not being accessed by any other host threads from the process when this function is called.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaDeviceSynchronize

__host__cudaError_t cudaDeviceSetCacheConfig ( cudaFuncCache cacheConfig )
Sets the preferred cache configuration for the current device.
Parameters
cacheConfig
- Requested cache configuration
Description

On devices where the L1 cache and shared memory use the same hardware resources, this sets through cacheConfig the preferred cache configuration for the current device. This is only a preference. The runtime will use the requested configuration if possible, but it is free to choose a different configuration if required to execute the function. Any function preference set via cudaFuncSetCacheConfig ( C API) or cudaFuncSetCacheConfig ( C++ API) will be preferred over this device-wide setting. Setting the device-wide cache configuration to cudaFuncCachePreferNone will cause subsequent kernel launches to prefer to not change the cache configuration unless required to launch the kernel.

This setting does nothing on devices where the size of the L1 cache and shared memory are fixed.

Launching a kernel with a different preference than the most recent preference setting may insert a device-side synchronization point.

The supported cache configurations are:

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaDeviceGetCacheConfig, cudaFuncSetCacheConfig ( C API), cudaFuncSetCacheConfig ( C++ API), cuCtxSetCacheConfig

__host__cudaError_t cudaDeviceSetLimit ( cudaLimit limit, size_t value )
Set resource limits.
Parameters
limit
- Limit to set
value
- Size of limit
Description

Setting limit to value is a request by the application to update the current limit maintained by the device. The driver is free to modify the requested value to meet h/w requirements (this could be clamping to minimum or maximum values, rounding up to nearest element size, etc). The application can use cudaDeviceGetLimit() to find out exactly what the limit has been set to.

Setting each cudaLimit has its own specific restrictions, so each is discussed here.

  • cudaLimitDevRuntimeSyncDepth controls the maximum nesting depth of a grid at which a thread can safely call cudaDeviceSynchronize(). Setting this limit must be performed before any launch of a kernel that uses the device runtime and calls cudaDeviceSynchronize() above the default sync depth, two levels of grids. Calls to cudaDeviceSynchronize() will fail with error code cudaErrorSyncDepthExceeded if the limitation is violated. This limit can be set smaller than the default or up the maximum launch depth of 24. When setting this limit, keep in mind that additional levels of sync depth require the runtime to reserve large amounts of device memory which can no longer be used for user allocations. If these reservations of device memory fail, cudaDeviceSetLimit will return cudaErrorMemoryAllocation, and the limit can be reset to a lower value. This limit is only applicable to devices of compute capability 3.5 and higher. Attempting to set this limit on devices of compute capability less than 3.5 will result in the error cudaErrorUnsupportedLimit being returned.

  • cudaLimitDevRuntimePendingLaunchCount controls the maximum number of outstanding device runtime launches that can be made from the current device. A grid is outstanding from the point of launch up until the grid is known to have been completed. Device runtime launches which violate this limitation fail and return cudaErrorLaunchPendingCountExceeded when cudaGetLastError() is called after launch. If more pending launches than the default (2048 launches) are needed for a module using the device runtime, this limit can be increased. Keep in mind that being able to sustain additional pending launches will require the runtime to reserve larger amounts of device memory upfront which can no longer be used for allocations. If these reservations fail, cudaDeviceSetLimit will return cudaErrorMemoryAllocation, and the limit can be reset to a lower value. This limit is only applicable to devices of compute capability 3.5 and higher. Attempting to set this limit on devices of compute capability less than 3.5 will result in the error cudaErrorUnsupportedLimit being returned.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaDeviceGetLimit, cuCtxSetLimit

__host__cudaError_t cudaDeviceSetSharedMemConfig ( cudaSharedMemConfig config )
Sets the shared memory configuration for the current device.
Parameters
config
- Requested cache configuration
Description

On devices with configurable shared memory banks, this function will set the shared memory bank size which is used for all subsequent kernel launches. Any per-function setting of shared memory set via cudaFuncSetSharedMemConfig will override the device wide setting.

Changing the shared memory configuration between launches may introduce a device side synchronization point.

Changing the shared memory bank size will not increase shared memory usage or affect occupancy of kernels, but may have major effects on performance. Larger bank sizes will allow for greater potential bandwidth to shared memory, but will change what kinds of accesses to shared memory will result in bank conflicts.

This function will do nothing on devices with fixed shared memory bank size.

The supported bank configurations are:

  • cudaSharedMemBankSizeDefault: set bank width the device default (currently, four bytes)

  • cudaSharedMemBankSizeFourByte: set shared memory bank width to be four bytes natively.

  • cudaSharedMemBankSizeEightByte: set shared memory bank width to be eight bytes natively.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaDeviceSetCacheConfig, cudaDeviceGetCacheConfig, cudaDeviceGetSharedMemConfig, cudaFuncSetCacheConfig, cuCtxSetSharedMemConfig

__host____device__cudaError_t cudaDeviceSynchronize ( void )
Wait for compute device to finish.
Returns

cudaSuccess

Description

Blocks until the device has completed all preceding requested tasks. cudaDeviceSynchronize() returns an error if one of the preceding tasks has failed. If the cudaDeviceScheduleBlockingSync flag was set for this device, the host thread will block until the device has finished its work.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaDeviceReset, cuCtxSynchronize

__host____device__cudaError_t cudaGetDevice ( int* device )
Returns which device is currently being used.
Parameters
device
- Returns the device on which the active host thread executes the device code.
Returns

cudaSuccess

Description

Returns in *device the current device for the calling host thread.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaGetDeviceCount, cudaSetDevice, cudaGetDeviceProperties, cudaChooseDevice, cuCtxGetCurrent

__host____device__cudaError_t cudaGetDeviceCount ( int* count )
Returns the number of compute-capable devices.
Parameters
count
- Returns the number of devices with compute capability greater or equal to 2.0
Description

Returns in *count the number of devices with compute capability greater or equal to 2.0 that are available for execution. If there is no such device then cudaGetDeviceCount() will return cudaErrorNoDevice. If no driver can be loaded to determine if any such devices exist then cudaGetDeviceCount() will return cudaErrorInsufficientDriver.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaGetDevice, cudaSetDevice, cudaGetDeviceProperties, cudaChooseDevice, cuDeviceGetCount

__host__cudaError_t cudaGetDeviceFlags ( unsigned int* flags )
Gets the flags for the current device.
Parameters
flags
- Pointer to store the device flags
Description

Returns in flags the flags for the current device. If there is a current device for the calling thread, and the device has been initialized or flags have been set on that device specifically, the flags for the device are returned. If there is no current device, but flags have been set for the thread with cudaSetDeviceFlags, the thread flags are returned. Finally, if there is no current device and no thread flags, the flags for the first device are returned, which may be the default flags. Compare to the behavior of cudaSetDeviceFlags.

Typically, the flags returned should match the behavior that will be seen if the calling thread uses a device after this call, without any change to the flags or current device inbetween by this or another thread. Note that if the device is not initialized, it is possible for another thread to change the flags for the current device before it is initialized. Additionally, when using exclusive mode, if this thread has not requested a specific device, it may use a device other than the first device, contrary to the assumption made by this function.

If a context has been created via the driver API and is current to the calling thread, the flags for that context are always returned.

Flags returned by this function may specifically include cudaDeviceMapHost even though it is not accepted by cudaSetDeviceFlags because it is implicit in runtime API flags. The reason for this is that the current context may have been created via the driver API in which case the flag is not implicit and may be unset.

See also:

cudaGetDevice, cudaGetDeviceProperties, cudaSetDevice, cudaSetDeviceFlags, cuCtxGetFlags, cuDevicePrimaryCtxGetState

__host__cudaError_t cudaGetDeviceProperties ( cudaDeviceProp* prop, int  device )
Returns information about the compute-device.
Parameters
prop
- Properties for the specified device
device
- Device number to get properties for
Description

Returns in *prop the properties of device dev. The cudaDeviceProp structure is defined as:

‎    struct cudaDeviceProp {
              char name[256];
              size_t totalGlobalMem;
              size_t sharedMemPerBlock;
              int regsPerBlock;
              int warpSize;
              size_t memPitch;
              int maxThreadsPerBlock;
              int maxThreadsDim[3];
              int maxGridSize[3];
              int clockRate;
              size_t totalConstMem;
              int major;
              int minor;
              size_t textureAlignment;
              size_t texturePitchAlignment;
              int deviceOverlap;
              int multiProcessorCount;
              int kernelExecTimeoutEnabled;
              int integrated;
              int canMapHostMemory;
              int computeMode;
              int maxTexture1D;
              int maxTexture1DMipmap;
              int maxTexture1DLinear;
              int maxTexture2D[2];
              int maxTexture2DMipmap[2];
              int maxTexture2DLinear[3];
              int maxTexture2DGather[2];
              int maxTexture3D[3];
              int maxTexture3DAlt[3];
              int maxTextureCubemap;
              int maxTexture1DLayered[2];
              int maxTexture2DLayered[3];
              int maxTextureCubemapLayered[2];
              int maxSurface1D;
              int maxSurface2D[2];
              int maxSurface3D[3];
              int maxSurface1DLayered[2];
              int maxSurface2DLayered[3];
              int maxSurfaceCubemap;
              int maxSurfaceCubemapLayered[2];
              size_t surfaceAlignment;
              int concurrentKernels;
              int ECCEnabled;
              int pciBusID;
              int pciDeviceID;
              int pciDomainID;
              int tccDriver;
              int asyncEngineCount;
              int unifiedAddressing;
              int memoryClockRate;
              int memoryBusWidth;
              int l2CacheSize;
              int maxThreadsPerMultiProcessor;
              int streamPrioritiesSupported;
              int globalL1CacheSupported;
              int localL1CacheSupported;
              size_t sharedMemPerMultiprocessor;
              int regsPerMultiprocessor;
              int managedMemSupported;
              int isMultiGpuBoard;
              int multiGpuBoardGroupID;
              int singleToDoublePrecisionPerfRatio;
              int pageableMemoryAccess;
              int concurrentManagedAccess;
              int computePreemptionSupported;
              int canUseHostPointerForRegisteredMem;
              int cooperativeLaunch;
              int cooperativeMultiDeviceLaunch;
          }
where:
  • name[256] is an ASCII string identifying the device;

  • totalGlobalMem is the total amount of global memory available on the device in bytes;

  • sharedMemPerBlock is the maximum amount of shared memory available to a thread block in bytes;

  • regsPerBlock is the maximum number of 32-bit registers available to a thread block;

  • warpSize is the warp size in threads;

  • memPitch is the maximum pitch in bytes allowed by the memory copy functions that involve memory regions allocated through cudaMallocPitch();

  • maxThreadsPerBlock is the maximum number of threads per block;

  • maxThreadsDim[3] contains the maximum size of each dimension of a block;

  • maxGridSize[3] contains the maximum size of each dimension of a grid;

  • clockRate is the clock frequency in kilohertz;

  • totalConstMem is the total amount of constant memory available on the device in bytes;

  • major, minor are the major and minor revision numbers defining the device's compute capability;

  • textureAlignment is the alignment requirement; texture base addresses that are aligned to textureAlignment bytes do not need an offset applied to texture fetches;

  • texturePitchAlignment is the pitch alignment requirement for 2D texture references that are bound to pitched memory;

  • deviceOverlap is 1 if the device can concurrently copy memory between host and device while executing a kernel, or 0 if not. Deprecated, use instead asyncEngineCount.

  • multiProcessorCount is the number of multiprocessors on the device;

  • kernelExecTimeoutEnabled is 1 if there is a run time limit for kernels executed on the device, or 0 if not.

  • integrated is 1 if the device is an integrated (motherboard) GPU and 0 if it is a discrete (card) component.

  • canMapHostMemory is 1 if the device can map host memory into the CUDA address space for use with cudaHostAlloc()/cudaHostGetDevicePointer(), or 0 if not;

  • computeMode is the compute mode that the device is currently in. Available modes are as follows:
    • cudaComputeModeDefault: Default mode - Device is not restricted and multiple threads can use cudaSetDevice() with this device.

    • cudaComputeModeExclusive: Compute-exclusive mode - Only one thread will be able to use cudaSetDevice() with this device.

    • cudaComputeModeProhibited: Compute-prohibited mode - No threads can use cudaSetDevice() with this device.

    • cudaComputeModeExclusiveProcess: Compute-exclusive-process mode - Many threads in one process will be able to use cudaSetDevice() with this device.

      If cudaSetDevice() is called on an already occupied device with computeMode cudaComputeModeExclusive, cudaErrorDeviceAlreadyInUse will be immediately returned indicating the device cannot be used. When an occupied exclusive mode device is chosen with cudaSetDevice, all subsequent non-device management runtime functions will return cudaErrorDevicesUnavailable.

  • maxTexture1D is the maximum 1D texture size.

  • maxTexture1DMipmap is the maximum 1D mipmapped texture texture size.

  • maxTexture1DLinear is the maximum 1D texture size for textures bound to linear memory.

  • maxTexture2D[2] contains the maximum 2D texture dimensions.

  • maxTexture2DMipmap[2] contains the maximum 2D mipmapped texture dimensions.

  • maxTexture2DLinear[3] contains the maximum 2D texture dimensions for 2D textures bound to pitch linear memory.

  • maxTexture2DGather[2] contains the maximum 2D texture dimensions if texture gather operations have to be performed.

  • maxTexture3D[3] contains the maximum 3D texture dimensions.

  • maxTexture3DAlt[3] contains the maximum alternate 3D texture dimensions.

  • maxTextureCubemap is the maximum cubemap texture width or height.

  • maxTexture1DLayered[2] contains the maximum 1D layered texture dimensions.

  • maxTexture2DLayered[3] contains the maximum 2D layered texture dimensions.

  • maxTextureCubemapLayered[2] contains the maximum cubemap layered texture dimensions.

  • maxSurface1D is the maximum 1D surface size.

  • maxSurface2D[2] contains the maximum 2D surface dimensions.

  • maxSurface3D[3] contains the maximum 3D surface dimensions.

  • maxSurface1DLayered[2] contains the maximum 1D layered surface dimensions.

  • maxSurface2DLayered[3] contains the maximum 2D layered surface dimensions.

  • maxSurfaceCubemap is the maximum cubemap surface width or height.

  • maxSurfaceCubemapLayered[2] contains the maximum cubemap layered surface dimensions.

  • surfaceAlignment specifies the alignment requirements for surfaces.

  • concurrentKernels is 1 if the device supports executing multiple kernels within the same context simultaneously, or 0 if not. It is not guaranteed that multiple kernels will be resident on the device concurrently so this feature should not be relied upon for correctness;

  • ECCEnabled is 1 if the device has ECC support turned on, or 0 if not.

  • pciBusID is the PCI bus identifier of the device.

  • pciDeviceID is the PCI device (sometimes called slot) identifier of the device.

  • pciDomainID is the PCI domain identifier of the device.

  • tccDriver is 1 if the device is using a TCC driver or 0 if not.

  • asyncEngineCount is 1 when the device can concurrently copy memory between host and device while executing a kernel. It is 2 when the device can concurrently copy memory between host and device in both directions and execute a kernel at the same time. It is 0 if neither of these is supported.

  • unifiedAddressing is 1 if the device shares a unified address space with the host and 0 otherwise.

  • memoryClockRate is the peak memory clock frequency in kilohertz.

  • memoryBusWidth is the memory bus width in bits.

  • l2CacheSize is L2 cache size in bytes.

  • maxThreadsPerMultiProcessor is the number of maximum resident threads per multiprocessor.

  • streamPrioritiesSupported is 1 if the device supports stream priorities, or 0 if it is not supported.

  • globalL1CacheSupported is 1 if the device supports caching of globals in L1 cache, or 0 if it is not supported.

  • localL1CacheSupported is 1 if the device supports caching of locals in L1 cache, or 0 if it is not supported.

  • sharedMemPerMultiprocessor is the maximum amount of shared memory available to a multiprocessor in bytes; this amount is shared by all thread blocks simultaneously resident on a multiprocessor;

  • regsPerMultiprocessor is the maximum number of 32-bit registers available to a multiprocessor; this number is shared by all thread blocks simultaneously resident on a multiprocessor;

  • managedMemory is 1 if the device supports allocating managed memory on this system, or 0 if it is not supported.

  • isMultiGpuBoard is 1 if the device is on a multi-GPU board (e.g. Gemini cards), and 0 if not;

  • multiGpuBoardGroupID is a unique identifier for a group of devices associated with the same board. Devices on the same multi-GPU board will share the same identifier;

  • singleToDoublePrecisionPerfRatio is the ratio of single precision performance (in floating-point operations per second) to double precision performance.

  • pageableMemoryAccess is 1 if the device supports coherently accessing pageable memory without calling cudaHostRegister on it, and 0 otherwise.

  • concurrentManagedAccess is 1 if the device can coherently access managed memory concurrently with the CPU, and 0 otherwise.

  • computePreemptionSupported is 1 if the device supports Compute Preemption, and 0 otherwise.

  • canUseHostPointerForRegisteredMem is 1 if the device can access host registered memory at the same virtual address as the CPU, and 0 otherwise.

  • cooperativeLaunch is 1 if the device supports launching cooperative kernels via cudaLaunchCooperativeKernel, and 0 otherwise.

  • cooperativeMultiDeviceLaunch is 1 if the device supports launching cooperative kernels via cudaLaunchCooperativeKernelMultiDevice, and 0 otherwise.

See also:

cudaGetDeviceCount, cudaGetDevice, cudaSetDevice, cudaChooseDevice, cudaDeviceGetAttribute, cuDeviceGetAttribute, cuDeviceGetName

__host__cudaError_t cudaIpcCloseMemHandle ( void* devPtr )
Close memory mapped with cudaIpcOpenMemHandle.
Parameters
devPtr
- Device pointer returned by cudaIpcOpenMemHandle
Description

Unmaps memory returnd by cudaIpcOpenMemHandle. The original allocation in the exporting process as well as imported mappings in other processes will be unaffected.

Any resources used to enable peer access will be freed if this is the last mapping using them.

IPC functionality is restricted to devices with support for unified addressing on Linux operating systems. IPC functionality is not supported on Tegra platforms.

See also:

cudaMalloc, cudaFree, cudaIpcGetEventHandle, cudaIpcOpenEventHandle, cudaIpcGetMemHandle, cudaIpcOpenMemHandle, cuIpcCloseMemHandle

__host__cudaError_t cudaIpcGetEventHandle ( cudaIpcEventHandle_t* handle, cudaEvent_t event )
Gets an interprocess handle for a previously allocated event.
Parameters
handle
- Pointer to a user allocated cudaIpcEventHandle in which to return the opaque event handle
event
- Event allocated with cudaEventInterprocess and cudaEventDisableTiming flags.
Description

Takes as input a previously allocated event. This event must have been created with the cudaEventInterprocess and cudaEventDisableTiming flags set. This opaque handle may be copied into other processes and opened with cudaIpcOpenEventHandle to allow efficient hardware synchronization between GPU work in different processes.

After the event has been been opened in the importing process, cudaEventRecord, cudaEventSynchronize, cudaStreamWaitEvent and cudaEventQuery may be used in either process. Performing operations on the imported event after the exported event has been freed with cudaEventDestroy will result in undefined behavior.

IPC functionality is restricted to devices with support for unified addressing on Linux operating systems. IPC functionality is not supported on Tegra platforms.

See also:

cudaEventCreate, cudaEventDestroy, cudaEventSynchronize, cudaEventQuery, cudaStreamWaitEvent, cudaIpcOpenEventHandle, cudaIpcGetMemHandle, cudaIpcOpenMemHandle, cudaIpcCloseMemHandle, cuIpcGetEventHandle

__host__cudaError_t cudaIpcGetMemHandle ( cudaIpcMemHandle_t* handle, void* devPtr )
Gets an interprocess memory handle for an existing device memory allocation.
Parameters
handle
- Pointer to user allocated cudaIpcMemHandle to return the handle in.
devPtr
- Base pointer to previously allocated device memory
Description

Takes a pointer to the base of an existing device memory allocation created with cudaMalloc and exports it for use in another process. This is a lightweight operation and may be called multiple times on an allocation without adverse effects.

If a region of memory is freed with cudaFree and a subsequent call to cudaMalloc returns memory with the same device address, cudaIpcGetMemHandle will return a unique handle for the new memory.

IPC functionality is restricted to devices with support for unified addressing on Linux operating systems. IPC functionality is not supported on Tegra platforms.

See also:

cudaMalloc, cudaFree, cudaIpcGetEventHandle, cudaIpcOpenEventHandle, cudaIpcOpenMemHandle, cudaIpcCloseMemHandle, cuIpcGetMemHandle

__host__cudaError_t cudaIpcOpenEventHandle ( cudaEvent_t* event, cudaIpcEventHandle_t handle )
Opens an interprocess event handle for use in the current process.
Parameters
event
- Returns the imported event
handle
- Interprocess handle to open
Description

Opens an interprocess event handle exported from another process with cudaIpcGetEventHandle. This function returns a cudaEvent_t that behaves like a locally created event with the cudaEventDisableTiming flag specified. This event must be freed with cudaEventDestroy.

Performing operations on the imported event after the exported event has been freed with cudaEventDestroy will result in undefined behavior.

IPC functionality is restricted to devices with support for unified addressing on Linux operating systems. IPC functionality is not supported on Tegra platforms.

See also:

cudaEventCreate, cudaEventDestroy, cudaEventSynchronize, cudaEventQuery, cudaStreamWaitEvent, cudaIpcGetEventHandle, cudaIpcGetMemHandle, cudaIpcOpenMemHandle, cudaIpcCloseMemHandle, cuIpcOpenEventHandle

__host__cudaError_t cudaIpcOpenMemHandle ( void** devPtr, cudaIpcMemHandle_t handle, unsigned int  flags )
Opens an interprocess memory handle exported from another process and returns a device pointer usable in the local process.
Parameters
devPtr
- Returned device pointer
handle
- cudaIpcMemHandle to open
flags
- Flags for this operation. Must be specified as cudaIpcMemLazyEnablePeerAccess
Description

Maps memory exported from another process with cudaIpcGetMemHandle into the current device address space. For contexts on different devices cudaIpcOpenMemHandle can attempt to enable peer access between the devices as if the user called cudaDeviceEnablePeerAccess. This behavior is controlled by the cudaIpcMemLazyEnablePeerAccess flag. cudaDeviceCanAccessPeer can determine if a mapping is possible.

Contexts that may open cudaIpcMemHandles are restricted in the following way. cudaIpcMemHandles from each device in a given process may only be opened by one context per device per other process.

Memory returned from cudaIpcOpenMemHandle must be freed with cudaIpcCloseMemHandle.

Calling cudaFree on an exported memory region before calling cudaIpcCloseMemHandle in the importing context will result in undefined behavior.

IPC functionality is restricted to devices with support for unified addressing on Linux operating systems. IPC functionality is not supported on Tegra platforms.

Note:

No guarantees are made about the address returned in *devPtr. In particular, multiple processes may not receive the same address for the same handle.

See also:

cudaMalloc, cudaFree, cudaIpcGetEventHandle, cudaIpcOpenEventHandle, cudaIpcGetMemHandle, cudaIpcCloseMemHandle, cudaDeviceEnablePeerAccess, cudaDeviceCanAccessPeer, cuIpcOpenMemHandle

__host__cudaError_t cudaSetDevice ( int  device )
Set device to be used for GPU executions.
Parameters
device
- Device on which the active host thread should execute the device code.
Description

Sets device as the current device for the calling host thread. Valid device id's are 0 to (cudaGetDeviceCount() - 1).

Any device memory subsequently allocated from this host thread using cudaMalloc(), cudaMallocPitch() or cudaMallocArray() will be physically resident on device. Any host memory allocated from this host thread using cudaMallocHost() or cudaHostAlloc() or cudaHostRegister() will have its lifetime associated with device. Any streams or events created from this host thread will be associated with device. Any kernels launched from this host thread using the <<<>>> operator or cudaLaunchKernel() will be executed on device.

This call may be made from any host thread, to any device, and at any time. This function will do no synchronization with the previous or new device, and should be considered a very low overhead call.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaGetDeviceCount, cudaGetDevice, cudaGetDeviceProperties, cudaChooseDevice, cuCtxSetCurrent

__host__cudaError_t cudaSetDeviceFlags ( unsigned int  flags )
Sets flags to be used for device executions.
Parameters
flags
- Parameters for device operation
Description

Records flags as the flags to use when initializing the current device. If no device has been made current to the calling thread, then flags will be applied to the initialization of any device initialized by the calling host thread, unless that device has had its initialization flags set explicitly by this or any host thread.

If the current device has been set and that device has already been initialized then this call will fail with the error cudaErrorSetOnActiveProcess. In this case it is necessary to reset device using cudaDeviceReset() before the device's initialization flags may be set.

The two LSBs of the flags parameter can be used to control how the CPU thread interacts with the OS scheduler when waiting for results from the device.

  • cudaDeviceScheduleAuto: The default value if the flags parameter is zero, uses a heuristic based on the number of active CUDA contexts in the process C and the number of logical processors in the system P. If C > P, then CUDA will yield to other OS threads when waiting for the device, otherwise CUDA will not yield while waiting for results and actively spin on the processor.

  • cudaDeviceScheduleSpin: Instruct CUDA to actively spin when waiting for results from the device. This can decrease latency when waiting for the device, but may lower the performance of CPU threads if they are performing work in parallel with the CUDA thread.

  • cudaDeviceScheduleYield: Instruct CUDA to yield its thread when waiting for results from the device. This can increase latency when waiting for the device, but can increase the performance of CPU threads performing work in parallel with the device.

  • cudaDeviceScheduleBlockingSync: Instruct CUDA to block the CPU thread on a synchronization primitive when waiting for the device to finish work.

  • cudaDeviceBlockingSync: Instruct CUDA to block the CPU thread on a synchronization primitive when waiting for the device to finish work.

    Deprecated: This flag was deprecated as of CUDA 4.0 and replaced with cudaDeviceScheduleBlockingSync.

  • cudaDeviceMapHost: This flag enables allocating pinned host memory that is accessible to the device. It is implicit for the runtime but may be absent if a context is created using the driver API. If this flag is not set, cudaHostGetDevicePointer() will always return a failure code.

  • cudaDeviceLmemResizeToMax: Instruct CUDA to not reduce local memory after resizing local memory for a kernel. This can prevent thrashing by local memory allocations when launching many kernels with high local memory usage at the cost of potentially increased memory usage.

See also:

cudaGetDeviceFlags, cudaGetDeviceCount, cudaGetDevice, cudaGetDeviceProperties, cudaSetDevice, cudaSetValidDevices, cudaChooseDevice, cuDevicePrimaryCtxSetFlags

__host__cudaError_t cudaSetValidDevices ( int* device_arr, int  len )
Set a list of devices that can be used for CUDA.
Parameters
device_arr
- List of devices to try
len
- Number of devices in specified list
Description

Sets a list of devices for CUDA execution in priority order using device_arr. The parameter len specifies the number of elements in the list. CUDA will try devices from the list sequentially until it finds one that works. If this function is not called, or if it is called with a len of 0, then CUDA will go back to its default behavior of trying devices sequentially from a default list containing all of the available CUDA devices in the system. If a specified device ID in the list does not exist, this function will return cudaErrorInvalidDevice. If len is not 0 and device_arr is NULL or if len exceeds the number of devices in the system, then cudaErrorInvalidValue is returned.

Note:

Note that this function may also return error codes from previous, asynchronous launches.

See also:

cudaGetDeviceCount, cudaSetDevice, cudaGetDeviceProperties, cudaSetDeviceFlags, cudaChooseDevice