Jetson Linux API Reference

39.2 Release
nvsipl::CameraModuleInfo Struct Reference

Detailed Description

Defines information for the camera module.

A camera module is a physical grouping of a serializer, image sensor(s), and associated EEPROM(s).

Definition at line 559 of file NvSIPLDeviceBlockInfo.hpp.

Collaboration diagram for nvsipl::CameraModuleInfo:

Data Fields

std::string name = ""
 Holds the name of the camera module, for example, "SF3324". More...
 
std::string description = ""
 Holds the description of the camera module. More...
 
uint32_t linkIndex {UINT32_MAX}
 Holds the index of the deserializer link to which this module is connected. More...
 
bool isSimulatorModeEnabled {false}
 Holds a per-link flag which indicates whether simulator mode has been enabled for a camera module. More...
 
SerInfo serInfo
 Holds the SerInfo of the serializer. More...
 
bool isEEPROMSupported {false}
 Holds EEPROM support. More...
 
EEPROMInfo eepromInfo
 Holds the information about EEPROM device in a camera module. More...
 
SensorInfo sensorInfo
 Holds the information about the sensor in a camera module. More...
 
std::vector< CryptoKeyInfo > cryptoKeysList {}
 Allows to specify crypto keys IDs used by the camera module driver and to associate each key with specific crypto accelerator. More...
 
SerdesDataTransmissionMode dataTransmissionMode {SerdesDataTransmissionMode::PIXEL_MODE}
 Data transmission mode for the serializer-deserializer link. More...
 

Field Documentation

◆ cryptoKeysList

std::vector<CryptoKeyInfo> nvsipl::CameraModuleInfo::cryptoKeysList {}

Allows to specify crypto keys IDs used by the camera module driver and to associate each key with specific crypto accelerator.

Platform crypto accelerator resources (bandwidth, keyslots, max latency) are limited and this configuration allows to distribute limited crypto resources among enabled cameras to satisfy performance requirements for a specific usecase.

Available HW resources are described in a platform Device Tree as a list of crypto "channels". Channels can be distributed as needed between cameras allowing to share specific HW engine resources or give resources exclusively to specific cameras.

Crypto hardware is usually used by camera drivers to accelerate cryptographic authentication of cameras, camera images and control signals. Therefore keyList configuration is only meaningful for camera drivers which support and implement authentication feature.

If keyList configuration is not provided in this config, but authentication is enabled on a camera - camera stack will use some default crypto settings which should enable functionality, but may not give expected level of performance or latency. Key object sharing between cameras will not be done if not explicitly requested in this keysList configuration.

Definition at line 616 of file NvSIPLDeviceBlockInfo.hpp.

◆ dataTransmissionMode

SerdesDataTransmissionMode nvsipl::CameraModuleInfo::dataTransmissionMode {SerdesDataTransmissionMode::PIXEL_MODE}

Data transmission mode for the serializer-deserializer link.

Specifies whether the link operates in pixel mode (default) or tunneling mode.

Default: SerdesDataTransmissionMode::PIXEL_MODE

Definition at line 625 of file NvSIPLDeviceBlockInfo.hpp.

◆ description

std::string nvsipl::CameraModuleInfo::description = ""

Holds the description of the camera module.

Definition at line 565 of file NvSIPLDeviceBlockInfo.hpp.

◆ eepromInfo

EEPROMInfo nvsipl::CameraModuleInfo::eepromInfo

Holds the information about EEPROM device in a camera module.

Definition at line 592 of file NvSIPLDeviceBlockInfo.hpp.

◆ isEEPROMSupported

bool nvsipl::CameraModuleInfo::isEEPROMSupported {false}

Holds EEPROM support.

EEPROM support varies based on sensor HW and sensor driver support.

Definition at line 590 of file NvSIPLDeviceBlockInfo.hpp.

◆ isSimulatorModeEnabled

bool nvsipl::CameraModuleInfo::isSimulatorModeEnabled {false}

Holds a per-link flag which indicates whether simulator mode has been enabled for a camera module.

This is used for the ISP reprocessing use case to simulate the presence of a device block.

Note
The flag should be false for Safety build. For non-Safety build, true or false is allowed.

Definition at line 582 of file NvSIPLDeviceBlockInfo.hpp.

◆ linkIndex

uint32_t nvsipl::CameraModuleInfo::linkIndex {UINT32_MAX}

Holds the index of the deserializer link to which this module is connected.

Valid value: [0, MAX_CAMERAMODULES_PER_PLATFORM - 1]

Definition at line 572 of file NvSIPLDeviceBlockInfo.hpp.

◆ name

std::string nvsipl::CameraModuleInfo::name = ""

Holds the name of the camera module, for example, "SF3324".

Definition at line 562 of file NvSIPLDeviceBlockInfo.hpp.

◆ sensorInfo

SensorInfo nvsipl::CameraModuleInfo::sensorInfo

Holds the information about the sensor in a camera module.

Definition at line 594 of file NvSIPLDeviceBlockInfo.hpp.

◆ serInfo

SerInfo nvsipl::CameraModuleInfo::serInfo

Holds the SerInfo of the serializer.

Definition at line 584 of file NvSIPLDeviceBlockInfo.hpp.


The documentation for this struct was generated from the following file: