Variables
static constexpr const char *	kAppBuildId = "app.build_id"
	Unique identifier for a particular build or compilation of the application. More...

static constexpr const char *	kAppInstallationId = "app.installation.id"
	A unique identifier representing the installation of an application on a specific device. More...

static constexpr const char *	kAppJankFrameCount = "app.jank.frame_count"
	A number of frame renders that experienced jank. More...

static constexpr const char *	kAppJankPeriod = "app.jank.period"
	The time period, in seconds, for which this jank is being reported. More...

static constexpr const char *	kAppJankThreshold = "app.jank.threshold"
	The minimum rendering threshold for this jank, in seconds. More...

static constexpr const char *	kAppScreenCoordinateX = "app.screen.coordinate.x"
	The x (horizontal) coordinate of a screen coordinate, in screen pixels. More...

static constexpr const char *	kAppScreenCoordinateY = "app.screen.coordinate.y"
	The y (vertical) component of a screen coordinate, in screen pixels. More...

static constexpr const char *	kAppWidgetId = "app.widget.id"
	An identifier that uniquely differentiates this widget from other widgets in the same application. More...

static constexpr const char *	kAppWidgetName = "app.widget.name"
	The name of an application widget. More...

static constexpr const char *	kAppBuildId = "app.build_id"
	Unique identifier for a particular build or compilation of the application. More...

static constexpr const char *	kAppInstallationId = "app.installation.id"
	A unique identifier representing the installation of an application on a specific device. More...

static constexpr const char *	kAppJankFrameCount = "app.jank.frame_count"
	A number of frame renders that experienced jank. More...

static constexpr const char *	kAppJankPeriod = "app.jank.period"
	The time period, in seconds, for which this jank is being reported. More...

static constexpr const char *	kAppJankThreshold = "app.jank.threshold"
	The minimum rendering threshold for this jank, in seconds. More...

static constexpr const char *	kAppScreenCoordinateX = "app.screen.coordinate.x"
	The x (horizontal) coordinate of a screen coordinate, in screen pixels. More...

static constexpr const char *	kAppScreenCoordinateY = "app.screen.coordinate.y"
	The y (vertical) component of a screen coordinate, in screen pixels. More...

static constexpr const char *	kAppWidgetId = "app.widget.id"
	An identifier that uniquely differentiates this widget from other widgets in the same application. More...

static constexpr const char *	kAppWidgetName = "app.widget.name"
	The name of an application widget. More...

Variable Documentation

◆ kAppBuildId [1/2]

constexpr const char* semconv::app::kAppBuildId = "app.build_id"

staticconstexpr

Unique identifier for a particular build or compilation of the application.

Definition at line 25 of file includes/opentelemetry/semconv/incubating/app_attributes.h.

◆ kAppBuildId [2/2]

constexpr const char* semconv::app::kAppBuildId = "app.build_id"

staticconstexpr

Unique identifier for a particular build or compilation of the application.

Definition at line 25 of file 9.2/includes/opentelemetry/semconv/incubating/app_attributes.h.

◆ kAppInstallationId [1/2]

constexpr const char* semconv::app::kAppInstallationId = "app.installation.id"

staticconstexpr

A unique identifier representing the installation of an application on a specific device.

Its value SHOULD persist across launches of the same application installation, including through application upgrades. It SHOULD change if the application is uninstalled or if all applications of the vendor are uninstalled. Additionally, users might be able to reset this value (e.g. by clearing application data). If an app is installed multiple times on the same device (e.g. in different accounts on Android), each

app.installation.id

SHOULD have a different value. If multiple OpenTelemetry SDKs are used within the same application, they SHOULD use the same value for

app.installation.id

. Hardware IDs (e.g. serial number, IMEI, MAC address) MUST NOT be used as the

app.installation.id

.

For iOS, this value SHOULD be equal to the vendor identifier.

For Android, examples of

app.installation.id

implementations include:

Firebase Installation ID.
A globally unique UUID which is persisted across sessions in your application.
App set ID.
@code Settings.getString(Settings.Secure.ANDROID_ID) @endcode.

More information about Android identifier best practices can be found in the Android user data IDs guide.

Definition at line 54 of file includes/opentelemetry/semconv/incubating/app_attributes.h.

◆ kAppInstallationId [2/2]

constexpr const char* semconv::app::kAppInstallationId = "app.installation.id"

staticconstexpr

A unique identifier representing the installation of an application on a specific device.

Its value SHOULD persist across launches of the same application installation, including through application upgrades. It SHOULD change if the application is uninstalled or if all applications of the vendor are uninstalled. Additionally, users might be able to reset this value (e.g. by clearing application data). If an app is installed multiple times on the same device (e.g. in different accounts on Android), each

app.installation.id

SHOULD have a different value. If multiple OpenTelemetry SDKs are used within the same application, they SHOULD use the same value for

app.installation.id

. Hardware IDs (e.g. serial number, IMEI, MAC address) MUST NOT be used as the

app.installation.id

.

For iOS, this value SHOULD be equal to the vendor identifier.

For Android, examples of

app.installation.id

implementations include:

Firebase Installation ID.
A globally unique UUID which is persisted across sessions in your application.
App set ID.
@code Settings.getString(Settings.Secure.ANDROID_ID) @endcode.

More information about Android identifier best practices can be found in the Android user data IDs guide.

Definition at line 54 of file 9.2/includes/opentelemetry/semconv/incubating/app_attributes.h.

◆ kAppJankFrameCount [1/2]

constexpr const char* semconv::app::kAppJankFrameCount = "app.jank.frame_count"

staticconstexpr

A number of frame renders that experienced jank.

Depending on platform limitations, the value provided MAY be approximation.

Definition at line 61 of file includes/opentelemetry/semconv/incubating/app_attributes.h.

◆ kAppJankFrameCount [2/2]

constexpr const char* semconv::app::kAppJankFrameCount = "app.jank.frame_count"

staticconstexpr

A number of frame renders that experienced jank.

Depending on platform limitations, the value provided MAY be approximation.

Definition at line 61 of file 9.2/includes/opentelemetry/semconv/incubating/app_attributes.h.

◆ kAppJankPeriod [1/2]

constexpr const char* semconv::app::kAppJankPeriod = "app.jank.period"

staticconstexpr

The time period, in seconds, for which this jank is being reported.

Definition at line 66 of file includes/opentelemetry/semconv/incubating/app_attributes.h.

◆ kAppJankPeriod [2/2]

constexpr const char* semconv::app::kAppJankPeriod = "app.jank.period"

staticconstexpr

The time period, in seconds, for which this jank is being reported.

Definition at line 66 of file 9.2/includes/opentelemetry/semconv/incubating/app_attributes.h.

◆ kAppJankThreshold [1/2]

constexpr const char* semconv::app::kAppJankThreshold = "app.jank.threshold"

staticconstexpr

The minimum rendering threshold for this jank, in seconds.

Definition at line 71 of file includes/opentelemetry/semconv/incubating/app_attributes.h.

◆ kAppJankThreshold [2/2]

constexpr const char* semconv::app::kAppJankThreshold = "app.jank.threshold"

staticconstexpr

The minimum rendering threshold for this jank, in seconds.

Definition at line 71 of file 9.2/includes/opentelemetry/semconv/incubating/app_attributes.h.

◆ kAppScreenCoordinateX [1/2]

constexpr const char* semconv::app::kAppScreenCoordinateX = "app.screen.coordinate.x"

staticconstexpr

The x (horizontal) coordinate of a screen coordinate, in screen pixels.

Definition at line 76 of file 9.2/includes/opentelemetry/semconv/incubating/app_attributes.h.

◆ kAppScreenCoordinateX [2/2]

constexpr const char* semconv::app::kAppScreenCoordinateX = "app.screen.coordinate.x"

staticconstexpr

The x (horizontal) coordinate of a screen coordinate, in screen pixels.

Definition at line 76 of file includes/opentelemetry/semconv/incubating/app_attributes.h.

◆ kAppScreenCoordinateY [1/2]

constexpr const char* semconv::app::kAppScreenCoordinateY = "app.screen.coordinate.y"

staticconstexpr

The y (vertical) component of a screen coordinate, in screen pixels.

Definition at line 81 of file 9.2/includes/opentelemetry/semconv/incubating/app_attributes.h.

◆ kAppScreenCoordinateY [2/2]

constexpr const char* semconv::app::kAppScreenCoordinateY = "app.screen.coordinate.y"

staticconstexpr

The y (vertical) component of a screen coordinate, in screen pixels.

Definition at line 81 of file includes/opentelemetry/semconv/incubating/app_attributes.h.

◆ kAppWidgetId [1/2]

constexpr const char* semconv::app::kAppWidgetId = "app.widget.id"

staticconstexpr

An identifier that uniquely differentiates this widget from other widgets in the same application.

A widget is an application component, typically an on-screen visual GUI element.

Definition at line 88 of file 9.2/includes/opentelemetry/semconv/incubating/app_attributes.h.

◆ kAppWidgetId [2/2]

constexpr const char* semconv::app::kAppWidgetId = "app.widget.id"

staticconstexpr

An identifier that uniquely differentiates this widget from other widgets in the same application.

A widget is an application component, typically an on-screen visual GUI element.

Definition at line 88 of file includes/opentelemetry/semconv/incubating/app_attributes.h.

◆ kAppWidgetName [1/2]

constexpr const char* semconv::app::kAppWidgetName = "app.widget.name"

staticconstexpr

The name of an application widget.

A widget is an application component, typically an on-screen visual GUI element.

Definition at line 95 of file 9.2/includes/opentelemetry/semconv/incubating/app_attributes.h.

◆ kAppWidgetName [2/2]

constexpr const char* semconv::app::kAppWidgetName = "app.widget.name"

staticconstexpr

The name of an application widget.

A widget is an application component, typically an on-screen visual GUI element.

Definition at line 95 of file includes/opentelemetry/semconv/incubating/app_attributes.h.

NVIDIA DeepStream SDK API Reference

9.2 Release

Variables

Variable Documentation

◆ kAppBuildId [1/2]

◆ kAppBuildId [2/2]

◆ kAppInstallationId [1/2]

◆ kAppInstallationId [2/2]

◆ kAppJankFrameCount [1/2]

◆ kAppJankFrameCount [2/2]

◆ kAppJankPeriod [1/2]

◆ kAppJankPeriod [2/2]

◆ kAppJankThreshold [1/2]

◆ kAppJankThreshold [2/2]

◆ kAppScreenCoordinateX [1/2]

◆ kAppScreenCoordinateX [2/2]

◆ kAppScreenCoordinateY [1/2]

◆ kAppScreenCoordinateY [2/2]

◆ kAppWidgetId [1/2]

◆ kAppWidgetId [2/2]

◆ kAppWidgetName [1/2]

◆ kAppWidgetName [2/2]