Namespaces
	HostArchValues

Variables
static constexpr const char *	kHostArch = "host.arch"
	The CPU architecture the host system is running on. More...

static constexpr const char *	kHostCpuCacheL2Size = "host.cpu.cache.l2.size"
	The amount of level 2 memory cache available to the processor (in Bytes). More...

static constexpr const char *	kHostCpuFamily = "host.cpu.family"
	Family or generation of the CPU. More...

static constexpr const char *	kHostCpuModelId = "host.cpu.model.id"
	Model identifier. More...

static constexpr const char *	kHostCpuModelName = "host.cpu.model.name"
	Model designation of the processor. More...

static constexpr const char *	kHostCpuStepping = "host.cpu.stepping"
	Stepping or core revisions. More...

static constexpr const char *	kHostCpuVendorId = "host.cpu.vendor.id"
	Processor manufacturer identifier. More...

static constexpr const char *	kHostId = "host.id"
	Unique host ID. More...

static constexpr const char *	kHostImageId = "host.image.id"
	VM image ID or host OS image ID. More...

static constexpr const char *	kHostImageName = "host.image.name"
	Name of the VM image or OS install the host was instantiated from. More...

static constexpr const char *	kHostImageVersion = "host.image.version"
	The version string of the VM image or host OS as defined in Version Attributes. More...

static constexpr const char *	kHostIp = "host.ip"
	Available IP addresses of the host, excluding loopback interfaces. More...

static constexpr const char *	kHostMac = "host.mac"
	Available MAC addresses of the host, excluding loopback interfaces. More...

static constexpr const char *	kHostName = "host.name"
	Name of the host. More...

static constexpr const char *	kHostType = "host.type"
	Type of host. More...

static constexpr const char *	kHostArch = "host.arch"
	The CPU architecture the host system is running on. More...

static constexpr const char *	kHostCpuCacheL2Size = "host.cpu.cache.l2.size"
	The amount of level 2 memory cache available to the processor (in Bytes). More...

static constexpr const char *	kHostCpuFamily = "host.cpu.family"
	Family or generation of the CPU. More...

static constexpr const char *	kHostCpuModelId = "host.cpu.model.id"
	Model identifier. More...

static constexpr const char *	kHostCpuModelName = "host.cpu.model.name"
	Model designation of the processor. More...

static constexpr const char *	kHostCpuStepping = "host.cpu.stepping"
	Stepping or core revisions. More...

static constexpr const char *	kHostCpuVendorId = "host.cpu.vendor.id"
	Processor manufacturer identifier. More...

static constexpr const char *	kHostId = "host.id"
	Unique host ID. More...

static constexpr const char *	kHostImageId = "host.image.id"
	VM image ID or host OS image ID. More...

static constexpr const char *	kHostImageName = "host.image.name"
	Name of the VM image or OS install the host was instantiated from. More...

static constexpr const char *	kHostImageVersion = "host.image.version"
	The version string of the VM image or host OS as defined in Version Attributes. More...

static constexpr const char *	kHostIp = "host.ip"
	Available IP addresses of the host, excluding loopback interfaces. More...

static constexpr const char *	kHostMac = "host.mac"
	Available MAC addresses of the host, excluding loopback interfaces. More...

static constexpr const char *	kHostName = "host.name"
	Name of the host. More...

static constexpr const char *	kHostType = "host.type"
	Type of host. More...

Variable Documentation

◆ kHostArch [1/2]

constexpr const char* semconv::host::kHostArch = "host.arch"

staticconstexpr

The CPU architecture the host system is running on.

Definition at line 25 of file includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostArch [2/2]

constexpr const char* semconv::host::kHostArch = "host.arch"

staticconstexpr

The CPU architecture the host system is running on.

Definition at line 25 of file 9.2/includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostCpuCacheL2Size [1/2]

constexpr const char* semconv::host::kHostCpuCacheL2Size = "host.cpu.cache.l2.size"

staticconstexpr

The amount of level 2 memory cache available to the processor (in Bytes).

Definition at line 30 of file includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostCpuCacheL2Size [2/2]

constexpr const char* semconv::host::kHostCpuCacheL2Size = "host.cpu.cache.l2.size"

staticconstexpr

The amount of level 2 memory cache available to the processor (in Bytes).

Definition at line 30 of file 9.2/includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostCpuFamily [1/2]

constexpr const char* semconv::host::kHostCpuFamily = "host.cpu.family"

staticconstexpr

Family or generation of the CPU.

Definition at line 35 of file 9.2/includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostCpuFamily [2/2]

constexpr const char* semconv::host::kHostCpuFamily = "host.cpu.family"

staticconstexpr

Family or generation of the CPU.

Definition at line 35 of file includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostCpuModelId [1/2]

constexpr const char* semconv::host::kHostCpuModelId = "host.cpu.model.id"

staticconstexpr

Model identifier.

It provides more granular information about the CPU, distinguishing it from other CPUs within the same family.

Definition at line 41 of file includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostCpuModelId [2/2]

constexpr const char* semconv::host::kHostCpuModelId = "host.cpu.model.id"

staticconstexpr

Model identifier.

It provides more granular information about the CPU, distinguishing it from other CPUs within the same family.

Definition at line 41 of file 9.2/includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostCpuModelName [1/2]

constexpr const char* semconv::host::kHostCpuModelName = "host.cpu.model.name"

staticconstexpr

Model designation of the processor.

Definition at line 46 of file includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostCpuModelName [2/2]

constexpr const char* semconv::host::kHostCpuModelName = "host.cpu.model.name"

staticconstexpr

Model designation of the processor.

Definition at line 46 of file 9.2/includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostCpuStepping [1/2]

constexpr const char* semconv::host::kHostCpuStepping = "host.cpu.stepping"

staticconstexpr

Stepping or core revisions.

Definition at line 51 of file 9.2/includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostCpuStepping [2/2]

constexpr const char* semconv::host::kHostCpuStepping = "host.cpu.stepping"

staticconstexpr

Stepping or core revisions.

Definition at line 51 of file includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostCpuVendorId [1/2]

constexpr const char* semconv::host::kHostCpuVendorId = "host.cpu.vendor.id"

staticconstexpr

Processor manufacturer identifier.

A maximum 12-character string.

CPUID command returns the vendor ID string in EBX, EDX and ECX registers. Writing these to memory in this order results in a 12-character string.

Definition at line 59 of file 9.2/includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostCpuVendorId [2/2]

constexpr const char* semconv::host::kHostCpuVendorId = "host.cpu.vendor.id"

staticconstexpr

Processor manufacturer identifier.

A maximum 12-character string.

CPUID command returns the vendor ID string in EBX, EDX and ECX registers. Writing these to memory in this order results in a 12-character string.

Definition at line 59 of file includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostId [1/2]

constexpr const char* semconv::host::kHostId = "host.id"

staticconstexpr

Unique host ID.

For Cloud, this must be the instance_id assigned by the cloud provider. For non-containerized systems, this should be the

machine-id

. See the table below for the sources to use to determine the

machine-id

based on operating system.

Definition at line 66 of file includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostId [2/2]

constexpr const char* semconv::host::kHostId = "host.id"

staticconstexpr

Unique host ID.

For Cloud, this must be the instance_id assigned by the cloud provider. For non-containerized systems, this should be the

machine-id

. See the table below for the sources to use to determine the

machine-id

based on operating system.

Definition at line 66 of file 9.2/includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostImageId [1/2]

constexpr const char* semconv::host::kHostImageId = "host.image.id"

staticconstexpr

VM image ID or host OS image ID.

For Cloud, this value is from the provider.

Definition at line 71 of file includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostImageId [2/2]

constexpr const char* semconv::host::kHostImageId = "host.image.id"

staticconstexpr

VM image ID or host OS image ID.

For Cloud, this value is from the provider.

Definition at line 71 of file 9.2/includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostImageName [1/2]

constexpr const char* semconv::host::kHostImageName = "host.image.name"

staticconstexpr

Name of the VM image or OS install the host was instantiated from.

Definition at line 76 of file includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostImageName [2/2]

constexpr const char* semconv::host::kHostImageName = "host.image.name"

staticconstexpr

Name of the VM image or OS install the host was instantiated from.

Definition at line 76 of file 9.2/includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostImageVersion [1/2]

constexpr const char* semconv::host::kHostImageVersion = "host.image.version"

staticconstexpr

The version string of the VM image or host OS as defined in Version Attributes.

Definition at line 82 of file includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostImageVersion [2/2]

constexpr const char* semconv::host::kHostImageVersion = "host.image.version"

staticconstexpr

The version string of the VM image or host OS as defined in Version Attributes.

Definition at line 82 of file 9.2/includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostIp [1/2]

constexpr const char* semconv::host::kHostIp = "host.ip"

staticconstexpr

Available IP addresses of the host, excluding loopback interfaces.

IPv4 Addresses MUST be specified in dotted-quad notation. IPv6 addresses MUST be specified in the RFC 5952 format.

Definition at line 90 of file 9.2/includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostIp [2/2]

constexpr const char* semconv::host::kHostIp = "host.ip"

staticconstexpr

Available IP addresses of the host, excluding loopback interfaces.

IPv4 Addresses MUST be specified in dotted-quad notation. IPv6 addresses MUST be specified in the RFC 5952 format.

Definition at line 90 of file includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostMac [1/2]

constexpr const char* semconv::host::kHostMac = "host.mac"

staticconstexpr

Available MAC addresses of the host, excluding loopback interfaces.

MAC Addresses MUST be represented in IEEE RA hexadecimal form: as hyphen-separated octets in uppercase hexadecimal form from most to least significant.

Definition at line 100 of file includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostMac [2/2]

constexpr const char* semconv::host::kHostMac = "host.mac"

staticconstexpr

Available MAC addresses of the host, excluding loopback interfaces.

MAC Addresses MUST be represented in IEEE RA hexadecimal form: as hyphen-separated octets in uppercase hexadecimal form from most to least significant.

Definition at line 100 of file 9.2/includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostName [1/2]

constexpr const char* semconv::host::kHostName = "host.name"

staticconstexpr

Name of the host.

On Unix systems, it may contain what the hostname command returns, or the fully qualified hostname, or another name specified by the user.

Definition at line 106 of file includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostName [2/2]

constexpr const char* semconv::host::kHostName = "host.name"

staticconstexpr

Name of the host.

On Unix systems, it may contain what the hostname command returns, or the fully qualified hostname, or another name specified by the user.

Definition at line 106 of file 9.2/includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostType [1/2]

constexpr const char* semconv::host::kHostType = "host.type"

staticconstexpr

Type of host.

For Cloud, this must be the machine type.

Definition at line 111 of file includes/opentelemetry/semconv/incubating/host_attributes.h.

◆ kHostType [2/2]

constexpr const char* semconv::host::kHostType = "host.type"

staticconstexpr

Type of host.

For Cloud, this must be the machine type.

Definition at line 111 of file 9.2/includes/opentelemetry/semconv/incubating/host_attributes.h.

NVIDIA DeepStream SDK API Reference

9.2 Release

Namespaces

Variables

Variable Documentation

◆ kHostArch [1/2]

◆ kHostArch [2/2]

◆ kHostCpuCacheL2Size [1/2]

◆ kHostCpuCacheL2Size [2/2]

◆ kHostCpuFamily [1/2]

◆ kHostCpuFamily [2/2]

◆ kHostCpuModelId [1/2]

◆ kHostCpuModelId [2/2]

◆ kHostCpuModelName [1/2]

◆ kHostCpuModelName [2/2]

◆ kHostCpuStepping [1/2]

◆ kHostCpuStepping [2/2]

◆ kHostCpuVendorId [1/2]

◆ kHostCpuVendorId [2/2]

◆ kHostId [1/2]

◆ kHostId [2/2]

◆ kHostImageId [1/2]

◆ kHostImageId [2/2]

◆ kHostImageName [1/2]

◆ kHostImageName [2/2]

◆ kHostImageVersion [1/2]

◆ kHostImageVersion [2/2]

◆ kHostIp [1/2]

◆ kHostIp [2/2]

◆ kHostMac [1/2]

◆ kHostMac [2/2]

◆ kHostName [1/2]

◆ kHostName [2/2]

◆ kHostType [1/2]

◆ kHostType [2/2]