Specifications
Physical | Size: 3.07 in. x 4.33 in (78.00mm x 110.05mm) | |||
Connector: Dual SFP28 Ethernet (copper and optical) | ||||
Protocol Support | Ethernet: 25GBASE-CR/CR-S, 25GBASE-SR, 25GBASE-LR, 25G Ethernet Consortium, 10GBASE-SR, 10GBASE-LR, 10GBASE-ER, SGMII / 1000BASE-X | |||
Data Rate: 1/10/25 Gb/s Ethernet | ||||
PCI Express Gen3: SERDES @ 8.0GT/s (respectively), 16 lanes (2.0 and 1.1 compatible) | ||||
Power and Airflow | Voltage: 3.3V_PCI, 3.3V_AUX, 5V_AUX, 12V | |||
Power | Cable Type | Active Mode | Standby Mode | |
Typical Power(a) | Passive Cables | 12.95W | – | |
1.5W Active Cables | 15.95W | – | ||
Maximum Power | Passive Cables | 15.55W | 5V_AUX/12V: 4W | |
1.5W Active Cables | 18.55W | – | ||
Maximum power available through QSFP28 port: 1.5W | ||||
Airflow(c) | Cable Type | Heatsink to Port | Port to Heatsink | |
Passive Cable | 350LFM | 400LFM | ||
Active 1.5W Cable | 350LFM | 400LFM | ||
Environmental | Temperature | Operational | 0°C to 55°C | |
Non-operational | -40°C to 70°C | |||
Humidity | Operational | 10% to 85% relative humidity | ||
Non-operational | 10% to 90% relative humidity | |||
Altitude (Operational) | 3050m | |||
Regulatory | Safety | CB / cTUVus / CE | ||
EMC | CE / FCC / VCCI / ICES / RCM | |||
RoHS | RoHS compliant | |||
a. Typical power for ATIS traffic load.
b. For both operational and non-operational states.
c. Airflow is measured on ambient 55°.
NVIDIA recommends populating MCX542B-ACAN in a standard PCIe x8 OCP connector which exposes PCIe lanes in a straight manner.
In case the OCP slot exposes PCIe lanes in a reversed manner, MCX542B-ACAN supports automatic lane reversal with FW image from April 2019 release and above.
Please note that in standby mode, only port0 is available.
Physical | Size: 2.67 in. x 4.33 in (68.00mm x 110.05mm) | |||
Connector: Dual SFP28 Ethernet (copper and optical) | ||||
Protocol Support | Ethernet: 25GBASE-CR/CR-S, 25GBASE-SR, 25GBASE-LR, 25G Ethernet Consortium, 10GBASE-SR, 10GBASE-LR, 10GBASE-ER, SGMII / 1000BASE-X | |||
Data Rate: 1/10/25 Gb/s Ethernet | ||||
PCI Express Gen3: SERDES @ 8.0GT/s (respectively), 8 lanes (2.0 and 1.1 compatible) | ||||
Power and Airflow | Voltage: 3.3V_PCI, 3.3V_AUX, 5V_AUX, 12V | |||
Power | Cable Type | Active Mode | Standby Mode | |
Typical Power(a) | Passive Cables | 9.51W | – | |
1.5W Active Cables | 12.51W | – | ||
Maximum Power | Passive Cables | 11.98W | 5V_AUX/12V: 4W | |
1.5W Active Cables | 14.98W | – | ||
Maximum power available through QSFP28 port: 1.5W | ||||
Airflow(c) | Cable Type | Heatsink to Port | Port to Heatsink | |
Passive Cable | 400LFM | 400LFM | ||
Active 1.5W Cable | NA | 1200LFM | ||
Environmental | Temperature | Operational | 0°C to 55°C | |
Non-operational | -40°C to 70°C | |||
Humidity | Operational | 10% to 85% relative humidity | ||
Non-operational | 10% to 90% relative humidity | |||
Altitude (Operational) | 3050m | |||
Regulatory | Safety | CB / cTUVus / CE | ||
EMC | CE / FCC / VCCI / ICES / RCM | |||
RoHS | RoHS compliant | |||
a. Typical power for ATIS traffic load.
b. For both operational and non-operational states.
c. Airflow is measured on ambient 55°.
Physical | Size: 3.07 in. x 4.33 in (78.00mm x 110.05mm) | |||
Connector: Single QSFP28 Ethernet (copper and optical) | ||||
Protocol Support | Ethernet: 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR | |||
Data Rate: 1/10/25/40/50 Gb/s | ||||
PCI Express Gen3: SERDES @ 8.0GT/s (respectively), 16 lanes (2.0 and 1.1 compatible) | ||||
Power and Airflow | Voltage: 3.3VAUX, 5VAUX, 12V | |||
Power | Cable Type | Active Mode | Standby Mode | |
Typical Power(a) | Passive Cables | 13.77W | – | |
Maximum Power | Passive Cables | 16.35W | 5VAUX/12V: 5.8W | |
1.5W Active Cables | 17.85W | – | ||
Maximum power available through QSFP28 port: 3.5W | ||||
Airflow tested in a ducted tunnel(c) | Cable Type | Heatsink to Port | Port to Heatsink | |
Passive Cable | 400LFM | 400LFM | ||
Active 3.5W Cable | Not Supported | 800LFM | ||
Environmental | Temperature | Operational | 0°C to 55°C | |
Non-operational | -40°C to 70°C | |||
Humidity | Operational | 10% to 85% relative humidity | ||
Non-operational | 10% to 90% relative humidity | |||
Altitude (Operational) | 3050m | |||
Regulatory | Safety | CB / cTUVus / CE | ||
EMC | CE / FCC / VCCI / ICES / RCM | |||
RoHS | RoHS compliant | |||
a. Typical power for ATIS traffic load.
b. For both operational and non-operational states.
c. Airflow is measured on ambient 55°.
Physical | Size: 3.07 in. x 4.33 in (78.00mm x 110.05mm) | |||
Connector: Single QSFP28 Ethernet (copper and optical) | ||||
Protocol Support | Ethernet: 100GBASE-CR4, 100GBASE-KR4, 100GBASE-SR4, 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR | |||
Data Rate: 1/10/25/40/50/100 Gb/s | ||||
PCI Express Gen3: SERDES @ 8.0GT/s (respectively), 16 lanes (2.0 and 1.1 compatible) | ||||
Power and Airflow | Voltage: 3.3VAUX, 5VAUX, 12V | |||
Power | Cable Type | Active Mode | Standby Mode | |
Typical Power(a) | Passive Cables | 14.48W | – | |
Maximum Power | Passive Cables | 17.57W | 5VAUX/12V: 6.7W | |
1.5W Active Cables | 21.07W | – | ||
Maximum power available through QSFP28 port: 3.5W | ||||
Airflow tested in a ducted tunnel(c) | Cable Type | Heatsink to Port | Port to Heatsink | |
Passive Cable | 400LFM | 800LFM | ||
Active 1.5W Cable | NA | 400LFM | ||
Environmental | Temperature | Operational | 0°C to 55°C | |
Non-operational | -40°C to 70°C | |||
Humidity | Operational | 10% to 85% relative humidity | ||
Non-operational | 10% to 90% relative humidity | |||
Altitude (Operational) | 3050m | |||
Regulatory | Safety | CB / cTUVus / CE | ||
EMC | CE / FCC / VCCI / ICES / RCM | |||
RoHS | RoHS compliant | |||
a. Typical power for ATIS traffic load.
b. For both operational and non-operational states.
c. Airflow is measured on ambient 55°.
Physical | Size: 3.07 in. x 4.33 in (78.00mm x 110.05mm) | |||
Connector: Single QSFP28 Ethernet (copper and optical) | ||||
Protocol Support | Ethernet: 100GBASE-CR4, 100GBASE-KR4, 100GBASE-SR4, 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR | |||
Data Rate: 1/10/25/40/50/100 Gb/s | ||||
PCI Express Gen3: SERDES @ 8.0GT/s (respectively), 16 lanes (2.0 and 1.1 compatible) | ||||
Power and Airflow | Voltage: 3.3VAUX, 5VAUX, 12V | |||
Power | Cable Type | |||
Typical Power(a) | Passive Cables | 14.48W | ||
Maximum Power | Passive Cables | 17.57W | ||
1.5W Active Cables | 21.07W | |||
Maximum power available through QSFP28 port: 3.5W | ||||
Airflow tested in a ducted tunnel(c) | Cable Type | Heatsink to Port | Port to Heatsink | |
Passive Cable | 450LFM | 400LFM | ||
Active 1.5W Cable | 1200LFM | 700LFM | ||
Airflow tested in Dell’s PowerEdge Servers (C6420)(c) | Passive Cable | 450LFM | NA | |
Environmental | Temperature | Operational | 0°C to 55°C | |
Non-operational | -40°C to 70°C | |||
Humidity | Operational | 10% to 85% relative humidity | ||
Non-operational | 10% to 90% relative humidity | |||
Altitude (Operational) | 3050m | |||
Regulatory | Safety | CB / cTUVus / CE | ||
EMC | CE / FCC / VCCI / ICES / RCM | |||
RoHS | RoHS compliant | |||
a. Typical power for ATIS traffic load.
b. For both operational and non-operational states.
c. Airflow is measured on ambient 55°.
Physical | Size: 3.07 in. x 4.33 in (78.00mm x 110.05mm) | |||
Connector: Dual QSFP28 Ethernet (copper and optical) | ||||
Protocol Support | Ethernet: 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR | |||
Data Rate: 1/10/25/40 Gb/s | ||||
PCI Express Gen3: SERDES @ 8.0GT/s, 16 lanes (2.0 and 1.1 compatible) | ||||
Power and Airflow | Voltage: 3.3VAUX, 5VAUX, 12V | |||
Power | Cable Type | |||
Typical Power(a) | Passive Cables | 15.4W | ||
1.5W Active Cables | 23.2W | |||
Maximum Power | Passive Cables | 18.1W | ||
1.5W Active Cables | 25.9W | |||
Maximum power available through QSFP28 port: 3.5W | ||||
Airflow tested in a ducted tunnel(c) | Heatsink to Port | Port to Heatsink | ||
Passive Cable | 400LFM | 400LFM | ||
Active 1.5W Cable | NA | 1200LFM | ||
Environmental | Temperature | Operational | 0°C to 55°C | |
Non-operational | -40°C to 70°C | |||
Humidity | Operational | 10% to 85% relative humidity | ||
Non-operational | 10% to 90% relative humidity | |||
Altitude (Operational) | 3050m | |||
Regulatory | Safety | CB / cTUVus / CE | ||
EMC | CE / FCC / VCCI / ICES / RCM | |||
RoHS | RoHS compliant | |||
a. Typical power for ATIS traffic load.
b. For both operational and non-operational states.
c. Airflow is measured on ambient 55°.
Physical | Size: 3.07 in. x 4.33 in (78.00mm x 110.05mm) | |||
Connector: Dual QSFP28 Ethernet (copper and optical) | ||||
Protocol Support | Ethernet: 100GBASE-CR4, 100GBASE-KR4, 100GBASE-SR4, 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR | |||
Data Rate: 1/10/25/40/50/100 Gb/s | ||||
PCI Express Gen3/4: SERDES @ 8.0GT/s/16Gt/s, 16 lanes (2.0 and 1.1 compatible) | ||||
Power and Airflow | Voltage: 3.3VAUX, 5VAUX, 12V | |||
Power | Cable Type | |||
Typical Power(a) | Passive Cables | 20.03W | ||
3.5W Active Cables | 27.8W | |||
Maximum Power | Passive Cables | 24.3W | ||
3.5W Active Cables | 32.11W | |||
Maximum power available through QSFP28 port: 3.5W | ||||
Airflow(c) | Heatsink to Port | Port to Heatsink | ||
Passive Cable | 400LFM | 400LFM | ||
NVIDIA Active Cables | Not supported | 1200LFM | ||
Environmental | Temperature | Operational | 0°C to 55°C | |
Non-operational | -40°C to 70°C | |||
Humidity | Operational | 10% to 85% relative humidity | ||
Non-operational | 10% to 90% relative humidity | |||
Altitude (Operational) | 3050m | |||
Regulatory | Safety | CB / cTUVus / CE | ||
EMC | CE / FCC / VCCI / ICES / RCM | |||
RoHS | RoHS compliant | |||
a. Typical power for ATIS traffic load.
b. For both operational and non-operational states.
c. Airflow is measured on ambient 55°.
All dimensions are in millimeters. All the mechanical tolerances are +/- 0.1mm.
MCX542A-ACAN Mechanical Drawing and Dimensions
MCX542B-ACAN Mechanical Drawing and Dimensions
MCX545B-CCUN Mechanical Drawing and Dimensions
MCX545A-CCAN and MCX545A-CCUN Mechanical Drawing and Dimensions
MCX546A-CDAN and MCX546A-BCAN Mechanical Drawing and Dimensions
