Bug Fixes in this Firmware Version

For a list of old Bug Fixes, please see Bug Fixes History.

Internal Ref.	Issue
2796324	Description: Fixed an issue that resulted in firmware getting stuck and causing unexpected behavior when connecting an optical transceiver that support RXLOS, and the remote side port was down.
	Keywords: cables, RXLOS
	Discovered in Version: 20.31.1014
	Fixed in Release: 20.32.1010
2748800	Description: Fixed an issue that caused the link status to be reported incorrectly and consequently caused the link to go down due to the wrong definition of the RX_LOS polarity in the INI.
	Keywords: RX_LOS polarity
	Discovered in Version: 20.31.1014
	Fixed in Release: 20.32.1010
2784304	Description: Fixed an issue that prevented the system from creating more than 128K QPs.
	Keywords: QP
	Discovered in Version: 20.31.1014
	Fixed in Release: 20.32.1010
2798556	Description: Modified the Effective BER calculation method. Due to this, the value of the Effective BER will be slightly higher, however the link quality remains the same as prior to this change. Note: There is no change in the Symbol BER, it is the same as prior to this change.
	Keywords: BER
	Discovered in Version: 20.31.1014
	Fixed in Release: 20.32.1010
2797035	Description: Removed a wrong indication of the PCIe link down in the AER registers on PCIe switch upstream port.
	Keywords: PCIe
	Discovered in Version: 20.31.1014
	Fixed in Release: 20.32.1010
2678394	Description: Limited the external loopback speed according to the used module's capabilities.
	Keywords: Cables
	Discovered in Version: 20.31.1014
	Fixed in Release: 20.32.1010
2733080	Description: This firmware version includes the following PCIe changes: Fixed the ACS Port Number field in DSPs and ACS Egress Control Vector field in DSPs Added support for VSC on USP of PCIe Switch Fixed the mapping of Legacy Interrupts in the PCIe Switch Fixed MRRS & MPS configurations in DSPs
	Keywords: PCIe
	Discovered in Version: 20.31.1014
	Fixed in Release: 20.32.1010
2823281	Description: Fixed an issue that resulted in wrong RNR timeout when trying to set it during the rts2rts_qp transition.
	Keywords: RNR timeout
	Discovered in Version: 20.31.1014
	Fixed in Release: 20.32.1010
2038112	Description: Fixed an issue that cause the flash frequency on boot to be lower than expected (under 50Mhz) by enabling the firmware to increase it on boot2 to normal frequency. Note: On boards that use Winbond flash, the firmware is blocked if using a firmware that does not include this fix.
	Keywords: Flash frequency, firmware boot, Windbond flash
	Discovered in Version: 20.31.1014
	Fixed in Release: 20.32.1010
2798627	Description: Added support for DSFP AOC (CMIS) v4 when error code is not reported by the module.
	Keywords: Cables
	Discovered in Version: 20.31.1014
	Fixed in Release: 20.32.1010
2740158	Description: Fixed a race between DC QP flush and DC packets that led to stuck slices in the hardware. To avoid such situation, firmware keeps the TCU drop set until QP flush is done.
	Keywords: DC
	Discovered in Version: 20.31.1014
	Fixed in Release: 20.32.1010