Bug Fixes in this Firmware Version
Internal Ref. | Issue |
3923754 (NVbugs) | Description: Fixed an issue that caused the Downstream Port Containment (DPC) not to be exposed on the downstream ports of the top level PCIe switch in products supporting PCIe switch. |
Keywords: PCIe Switch, DPC | |
Discovered in Version: 28.35.1012 | |
Fixed in Release: 28.36.1010 | |
3070480 | Description: Fixed an issue that resulted in PRBS lock loss (PRBS_CHK_ERR_CNT_NO_CLR field is raising) when the PRBS mode was first configured on the ConnectX-7 adapter card and then on the Wedge400 switch. |
Keywords: PRBS | |
Discovered in Version: 28.35.1012 | |
Fixed in Release: 28.36.1010 | |
3317621 | Description: Fixed an issue that caused wqe_based_steering CQEs not to be generated upon an error. |
Keywords: CQE | |
Discovered in Version: 28.35.1012 | |
Fixed in Release: 28.36.1010 | |
3239340 | Description: Aligned RDE behavior to DSP0266 v1.15.0 table 23. |
Keywords: RDE | |
Discovered in Version: 28.35.1012 | |
Fixed in Release: 28.36.1010 | |
3016801 | Description: Fixed a rare issue that resulted in link not raising when connecting a ConnentX-7 adapter card to IXIA in PAM4 speeds. |
Keywords: PAM4, IXIA, link up | |
Discovered in Version: 28.35.1012 | |
Fixed in Release: 28.36.1010 | |
3073517 | Description: Fixed an issue that resulted in device link down, and the device not being able to get traffic, when moving between two states DETECT and POLLING CONFIG in RTL. |
Keywords: RTL, link down, traffic | |
Discovered in Version: 28.35.1012 | |
Fixed in Release: 28.36.1010 | |
3073517 | Description: When connecting a ConnectX-7 adapter card to a ConnectX-5 or an NVIDIA Spectrum switch, configuring first 10G/40G and then configuring back 100G we result in linkup failure. |
Keywords: ConnectX-5, NVIDIA Spectrum, linkup | |
Discovered in Version: 28.33.4030 | |
Fixed in Release: 28.36.1010 | |
3077026 | Description: When connecting with MMS4X00-NL400 transceiver at 200Gb/s, instability may be experienced upon link up. |
Keywords: Transceiver, Link Up | |
Discovered in Version: 28.34.1002 | |
Fixed in Release: 28.36.1010 | |
3077026 | Description: When connecting a ConnectX-7 adapter card to ConnectX-7 adapter card and one side is configured to RM Loopback, and the port is toggled, link flap maybe experienced. |
Keywords: Link flap | |
Discovered in Version: 28.34.1002 | |
Fixed in Release: 28.36.1010 | |
3106146 | Description: Live migration of MPV affiliated function pair is not supported when port numbers are changed. Each function should stay on the same port number as before migration. |
Keywords: MPV live migration | |
Discovered in Version: 28.34.1002 | |
Fixed in Release: 28.36.1010 | |
2169950 | Description: When decapsulation on a packet occurs, the FCS indication is not calculated correctly. |
Keywords: FCS | |
Discovered in Version: 28.34.1002 | |
Fixed in Release: 28.36.1010 | |
3147219 | Description: SPDM Get Measurements might return an invalid signature while executed without the included measurements (request param2 = 0). |
Keywords: SPDM | |
Discovered in Version: 28.34.4000 | |
Fixed in Release: 28.36.1010 | |
3147207 | Description: The SPDM challenge command returns the hash of all the measurements without their headers. |
Keywords: SPDM | |
Discovered in Version: 28.34.4000 | |
Fixed in Release: 28.36.1010 | |
3261861 | Description: Connecting an HDR device to an NDR device with Optical cables longer than 30m causes degradation in the bandwidth. |
Keywords: HDR-to-NDR, cables | |
Discovered in Version: 28.35.1012 | |
Fixed in Release: 28.36.1010 | |
3225504 | Description: Enabled constant clock offset (visible using PPS out) when synchronizing the device using PTP in 25G or 10G port link speed. |
Keywords: PTP, PPS offset | |
Discovered in Version: 28.35.1012 | |
Fixed in Release: 28.36.1010 | |
3288489 | Description: Fixed an issue that caused the Pkey table not to be updated, and wrong value to be sent, when the MADs handled in a long process were sent using GLOBAL_GVMI instead of vport0_gvmi. |
Keywords: Pkey | |
Discovered in Version: 28.35.1012 | |
Fixed in Release: 28.36.1010 | |
3283455 | Description: Fixed a wrong lane mapping to serdes when selecting the OSFP port and using only 4 lanes. |
Keywords: QSFP, lanes | |
Discovered in Version: 28.35.1012 | |
Fixed in Release: 28.36.1010 |