image image image image image

On This Page

About This Manual

This User Manual describes NVIDIA® ConnectX®-4 Lx Ethernet adapter cards for Open Compute Project, spec 2.0. It provides details as to the interfaces of the board, specifications, required software and firmware for operating the board, and relevant documentation.

Ordering Part Numbers

The table below provides the ordering part numbers (OPN) for the available ConnectX-4 Lx Ethernet adapter cards for OCP Spec 2.0.

OPNMarketing DescriptionOCP Spec and Type
MCX4421A-XCQNConnectX®-4 Lx EN network interface card for OCP with Host Management, 10GbE dual-port SFP28, PCIe3.0 x8, no bracketOCP Spec 2.0 Type 1 Stacking Height
MCX4411A-ACANConnectX®-4 Lx EN network interface card for OCP, without host management, 25GbE single-port SFP28, PCIe3.0 x8, no bracket
MCX4421A-ACANConnectX®-4 Lx EN network interface card for OCP, without host management, 25GbE dual-port SFP28, PCIe3.0 x8, no bracket
MCX4411A-ACQNConnectX®-4 Lx EN network interface card for OCP with Host Management, 25GbE single-port SFP28, PCIe3.0 x8, no bracket
MCX4421A-ACQNConnectX®-4 Lx EN network interface card for OCP with Host Management, 25GbE dual-port SFP28, PCIe3.0 x8, no bracket
MCX4411A-ACUNConnectX®-4 Lx EN network interface card for OCP, without host management, 25GbE single-port SFP28, PCIe3.0 x8, UEFI Enabled, no bracket
MCX4421A-ACUNConnectX®-4 Lx EN network interface card for OCP, without host management, 25GbE dual-port SFP28, PCIe3.0 x8, UEFI Enabled, no bracket
MCX4431A-GCANConnectX®-4 Lx EN network interface card for OCP, with Host Management, 50GbE single-port QSFP28, PCIe3.0 x8, no bracket
MCX4431A-GCUNConnectX®-4 Lx EN network interface card for OCP2.0, Type 1, with Host Management, 50GbE single-port QSFP28, PCIe3.0 x8, UEFI Enabled, no bracket
MCX4431M-GCANConnectX®-4 Lx EN network interface card for OCP with Multi-Host and Host Management, 50GbE single-port QSFP28, PCIe3.0 x8, no bracketOCP Spec 2.0 Type 2 Stacking Height

Intended Audience

This manual is intended for the installer and user of these cards. The manual assumes basic familiarity with Ethernet network and architecture specifications.

Technical Support

Customers who purchased NVIDIA products directly from NVIDIA are invited to contact us through the following methods:

Customers who purchased NVIDIA Global Support Services, please see your contract for details regarding Technical Support.
Customers who purchased NVIDIA products through an NVIDIA-approved reseller should first seek assistance through their reseller.

Related Documentation

NVIDIA OFED for Linux User Manual and Release NotesUser Manual describing OFED features, performance, band diagnostic, tools content and configuration. See NVIDIA OFED for Linux Documentation.
WinOF-2 for Windows User Manual and Release NotesUser Manual describing WinOF-2 features, performance, Ethernet diagnostic, tools content and configuration. See WinOF-2 for Windows Documentation.
NVIDIA VMware for Ethernet User Manual and Release NotesUser Manual describing the various components of the NVIDIA ConnectX® NATIVE ESXi stack. See http://www.nvidia.com Products > Software > Ethernet Drivers > VMware Driver
NVIDIA Firmware Utility (mlxup) User Manual and Release NotesNVIDIA firmware update and query utility used to update the firmware. See http://www.nvidia.com > Products > Software > Firmware Tools >mlxup Firmware Utility
NVIDIA Firmware Tools (MFT) User Manual

User Manual describing the set of MFT firmware management tools for a single node. See MFT User Manual.

IEEE Std 802.3 SpecificationIEEE Ethernet specification at http://standards.ieee.org/
PCI Express SpecificationsIndustry Standard PCI Express Base and Card Electromechanical Specifications at https://pcisig.com/specifications
NVIDIA LinkX Interconnect Solutions

NVIDIA LinkX InfiniBand cables and transceivers are designed to maximize the performance of High-Performance Computing networks, requiring high-bandwidth, low-latency connections between compute nodes and switch nodes. NVIDIA offers one of industry’s broadest portfolio of QDR/FDR10 (40Gb/s), FDR (56Gb/s), EDR/HDR100 (100Gb/s) and HDR (200Gb/s) cables, including Direct Attach Copper cables (DACs), copper splitter cables, Active Optical Cables (AOCs) and transceivers in a wide range of lengths from 0.5m to 10km. In addition to meeting IBTA standards, NVIDIA tests every product in an end-to-end environment ensuring a Bit Error Rate of less than 1E-15Read more at https://www.nvidia.com/products/interconnect/infiniband-overview.php

Open Compute Project 2.0 Specification

https://www.opencompute.org/


Document Conventions

When discussing memory sizes, MB and MBytes are used in this document to mean size in mega Bytes. The use of Mb or Mbits (small b) indicates size in mega bits. In this document PCIe is used to mean PCI Express.