Specifications
Physical | Size: 2.67 in. x 4.33 in. (68.00 mm x 110.05 mm) | |||
Connector: Dual SFP28 (copper and optical) | ||||
Protocol Support | Ethernet: 10GBASE-SR, 10GBASE-LR, 10GBASE-ER, 10GBASE-CX4, SGMII, 1000BASE-X | |||
Data Rate: 1/10 Gb/s Ethernet | ||||
PCI Express Gen3: SERDES @ 8.0GT/s, 8 lanes (2.0 and 1.1 compatible) | ||||
Power and Airflow | Voltage: 5V_AUX and 3.3V_AUX | |||
Power | Cable Type | Active Mode | Standby Mode | |
Typical Power(a) | Passive Cables | 9W | – | |
Maximum Power | Passive Cables | 10.63W | 5V_AUX: 3.4W | |
1.5W Active Cables | 13.63W | – | ||
Maximum power available through SFP28 port: 1.5W | ||||
Airflow(c) (port-to-heatsink) | Cable Type | Active Mode | Standby Mode | |
Passive/Active Cables | 200LFM | 100LFM | ||
Environmental | Temperature | Operational | 0°C to 55°C | |
Non-operational | -40°C to 70°C | |||
Humidity | Operational | 10% to 85% relative humidity | ||
Non-operational | 10% to 90% relative humidity | |||
Altitude (Operational) | 3050m | |||
Regulatory | Safety | CB / cTUVus / CE | ||
EMC | CE / FCC / VCCI / ICES / RCM | |||
RoHS | RoHS compliant | |||
Notes: a. Typical power for ATIS traffic load.
b. For both operational and non-operational states.
c. Simulated inside an air tunnel (15.2 mm high and 73 mm wide).
Physical | Size: 2.67 in. x 4.33 in. (68.00 mm x 110.05 mm) | |||
Connector: Single SFP28 (copper and optical) | ||||
Protocol Support | Ethernet: 25GBASE-R, 20GBASE-KR2, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII | |||
Data Rate: 1/10/25 Gb/s Ethernet | ||||
PCI Express Gen3: SERDES @ 8.0GT/s, 8 lanes (2.0 and 1.1 compatible) | ||||
Power and Airflow | Voltage: 5V_AUX and 3.3V_AUX | |||
Power | Cable Type | Active Mode | Standby Mode | |
Typical Power(a) | Passive Cables | 8.41W | TBD | |
Maximum Power | Passive Cables | 10.05W | TBD | |
1.5W Active Cables | 11.55 | TBD | ||
Maximum power available through SFP28 port: 1.5W | ||||
Airflow (port-to-heatsink) | Cable Type | Active Mode | Standby Mode | |
Passive/Active Cables | 200LFM | 100LFM | ||
Environmental | Temperature | Operational | 0°C to 55°C | |
Non-operational | -40°C to 70°C | |||
Humidity | Operational | 10% to 85% relative humidity | ||
Non-operational | 10% to 90% relative humidity | |||
Altitude (Operational) | 3050m | |||
Regulatory | Safety | CB / cTUVus / CE | ||
EMC | CE / FCC / VCCI / ICES / RCM | |||
RoHS | RoHS compliant | |||
Notes: a. Typical power for ATIS traffic load.
b. For both operational and non-operational states.
c. Simulated inside an air tunnel (15.2 mm high and 73 mm wide).
Physical | Size: 2.67 in. x 4.33 in. (68.00 mm x 110.05 mm) | |||
Connector: Single SFP28 (copper and optical) | ||||
Protocol Support | Ethernet: 25GBASE-R, 20GBASE-KR2, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII | |||
Data Rate: 1/10/25 Gb/s Ethernet | ||||
PCI Express Gen3: SERDES @ 8.0GT/s, 8 lanes (2.0 and 1.1 compatible) | ||||
Power and Airflow | Voltage: 5V_AUX and 3.3V_AUX | |||
Power | Cable Type | Active Mode | Standby Mode | |
Typical Power(a) | Passive Cables | 9.01W | TBD | |
Maximum Power | Passive Cables | 10.83W | TBD | |
1.5W Active Cables | 13.83W | TBD | ||
Maximum power available through SFP28 port: 1.5W | ||||
Airflow (port-to-heatsink) | Passive/Active Cables | 200LFM | 100LFM | |
Environmental | Temperature | Operational | 0°C to 55°C | |
Non-operational | -40°C to 70°C | |||
Humidity | Operational | 10% to 85% relative humidity | ||
Non-operational | 10% to 90% relative humidity | |||
Altitude (Operational) | 3050m | |||
Regulatory | Safety | CB / cTUVus / CE | ||
EMC | CE / FCC / VCCI / ICES / RCM | |||
RoHS | RoHS compliant | |||
Notes: a. Typical power for ATIS traffic load.
b. For both operational and non-operational states.
c. Simulated inside an air tunnel (15.2 mm high and 73 mm wide).
Physical | Size: 2.67 in. x 4.33 in. (68.00 mm x 110.05 mm) | |||
Connector: Single SFP28 (copper and optical) | ||||
Protocol Support | Ethernet: 25GBASE-R, 20GBASE-KR2, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII | |||
Data Rate: 1/10/25 Gb/s Ethernet | ||||
PCI Express Gen3: SERDES @ 8.0GT/s, 8 lanes (2.0 and 1.1 compatible) | ||||
Power and Airflow | Voltage: 5V_AUX and 3.3V_AUX | |||
Power | Cable Type | Active Mode | Standby Mode | |
Typical Power(a) | Passive Cables | 8.41W | TBD | |
Maximum Power | Passive Cables | 10.05W | TBD | |
1.5W Active Cables | 11.5W | TBD | ||
Maximum power available through SFP28 port: 1.5W | ||||
Airflow (port-to-heatsink) | Cable Type | Active Mode | Standby Mode | |
Passive/Active Cables | 200LFM | 100LFM | ||
Environmental | Temperature | Operational | 0°C to 55°C | |
Non-operational | -40°C to 70°C | |||
Humidity | Operational | 10% to 85% relative humidity | ||
Non-operational | 10% to 90% relative humidity | |||
Altitude (Operational) | 3050m | |||
Regulatory | Safety | CB / cTUVus / CE | ||
EMC | CE / FCC / VCCI / ICES / RCM | |||
RoHS | RoHS compliant | |||
Notes: a. Typical power for ATIS traffic load.
b. For both operational and non-operational states.
c. Simulated inside an air tunnel (15.2 mm high and 73 mm wide). Airflow direction - port to heatsink.
Physical | Size: 2.67 in. x 4.33 in. (68.00 mm x 110.05 mm) | |||
Connector: Dual SFP28 (copper and optical) | ||||
Protocol Support | Ethernet: 25GBASE-R, 20GBASE-KR2, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII | |||
Data Rate: 1/10/25 Gb/s Ethernet | ||||
PCI Express Gen3: SERDES @ 8.0GT/s, 8 lanes (2.0 and 1.1 compatible) | ||||
Power and Airflow | Voltage: 5V_AUX and 3.3V_AUX | |||
Power | Cable Type | Active Mode | Standby Mode | |
Typical Power(a) | Passive Cables | 9.01W | TBD | |
Maximum Power | Passive Cables | 10.83W | TBD | |
1.5W Active Cables | 13.83W | TBD | ||
Maximum power available through SFP28 port: 1.5W | ||||
Airflow (port-to-heatsink) | Cable Type | Active Mode | Standby Mode | |
Passive/Active Cables | 200LFM | 100LFM | ||
Environmental | Temperature | Operational | 0°C to 55°C | |
Non-operational | -40°C to 70°C | |||
Humidity | Operational | 10% to 85% relative humidity | ||
Non-operational | 10% to 90% relative humidity | |||
Altitude (Operational) | 3050m | |||
Regulatory | Safety | CB / cTUVus / CE | ||
EMC | CE / FCC / VCCI / ICES / RCM | |||
RoHS | RoHS compliant | |||
Notes: a. Typical power for ATIS traffic load.
b. For both operational and non-operational states.
c. Simulated inside an air tunnel (15.2 mm high and 73 mm wide). Airflow direction - port to heatsink.
Physical | Size: 2.67 in. x 4.33 in (68.00 mm x 110.05 mm) | |||
Connector: Single QSFP28 (copper and optical) | ||||
Protocol Support | Ethernet: 50GBASE-R4, 50G-R2 (EC), 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4, 40GBASE-LR4, 25GBASE-CR/CR-S, 25GBASE-SR, 25GBASE-LR, 25G-R (EC), 10GBASE-SR, 10GBASE-LR, 10GBASE-ER, 10GBASE-CX4, SGMII / 1000BASE-X | |||
Data Rate: 1/10/25/40/50 Gb/s Ethernet | ||||
PCI Express Gen3: SERDES @ 8.0GT/s, 8 lanes (2.0 and 1.1 compatible) | ||||
Power and Airflow | Voltage: 5V_AUX, 3.3V_AUX | |||
Power | Cable Type | Active Mode | Standby Mode | |
Typical Power(a) | Passive Cables | 9.07W | TBD | |
Maximum Power | Passive Cables | 10.82W | TBD | |
1.5W Active Cables | 14.32W | TBD | ||
Maximum power available through QSFP28 port: 3.5W | ||||
Airflow(c) (port-to-heatsink) | Cable Type | Active Mode | Standby Mode | |
Passive/Active Cables | 250LFM | 100LFM | ||
Environmental | Temperature | Operational | 0°C to 55°C | |
Non-operational | -40°C to 70°C | |||
Humidity | Operational | 10% to 85% relative humidity | ||
Non-operational | 10% to 90% relative humidity | |||
Altitude (Operational) | 3050m | |||
Regulatory | Safety | CB / cTUVus / CE | ||
EMC | CE / FCC / VCCI / ICES / RCM | |||
RoHS | RoHS compliant | |||
Notes: a. Typical power for ATIS traffic load.
b. For both operational and non-operational states.
c. Simulated inside an air tunnel (15.2 mm high and 73 mm wide).
Physical | Size: 3.07 in. x 4.33 in (78.00 mm x 110.05 mm) | |||
Connector: Single QSFP28 (copper and optical) | ||||
Protocol Support | Ethernet: 50GBASE-R4, 50G-R2 (EC), 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4, 40GBASE-LR4, 25GBASE-CR/CR-S, 25GBASE-SR, 25GBASE-LR, 25G-R (EC), 10GBASE-SR, 10GBASE-LR, 10GBASE-ER, 10GBASE-CX4, SGMII / 1000BASE-X | |||
Data Rate: 1/10/25/40/50 Gb/s Ethernet | ||||
PCI Express Gen3: SERDES @ 8.0GT/s, 8 lanes (2.0 and 1.1 compatible) | ||||
Power and Airflow | Voltage: 5V_AUX, 3.3V_AUX | |||
Power | Cable Type | Active Mode | Standby Mode | |
Typical Power(a) | Passive Cables | 11.2W | TBD | |
Maximum Power | Passive Cables | 13.08W | TBD | |
1.5W Active Cables | 16.58W | TBD | ||
Maximum power available through QSFP28 port: 3.5W | ||||
Airflow(c) (port-to-heatsink) | Cable Type | Active Mode | Standby Mode | |
Passive/Active Cables | 300LFM | 100LFM | ||
Environmental | Temperature | Operational | 0°C to 55°C | |
Non-operational | -40°C to 70°C | |||
Humidity | Operational | 10% to 85% relative humidity | ||
Non-operational | 10% to 90% relative humidity | |||
Altitude (Operational) | 3050m | |||
Regulatory | Safety | CB / cTUVus / CE | ||
EMC | CE / FCC / VCCI / ICES / RCM | |||
RoHS | RoHS compliant | |||
Notes: a. Typical power for ATIS traffic load.
b. For both operational and non-operational states.
c. Simulated inside an air tunnel (15.2 mm high and 73 mm wide). Airflow direction - port to heatsink.
For the 3D Model of the card, please refer to 3D Models at http://www.nvidia.com/page/3d_models.
All dimensions are in millimeters. The PCB mechanical tolerances is +/- 0.13mm.
Single-port 10/25 Gb/s Cards | Dual-port 10/25 Gb/s Cards |
| 
|
Single-port 50Gb/s Cards | Multi-host Single-port 50Gb/s Cards |
| 
|