Linux Driver Installation
This section describes how to install and test the MLNX_OFED for Linux package on a single server with ConnectX-5 adapter card installed.
Requirements | Description |
Platforms | A server platform with a ConnectX-4 Lx adapter card installed • MT27710 ConnectX®-4 Lx (firmware: fw-ConnectX4-Lx) |
Required Disk Space for Installation | 1GB |
Operating System | Linux operating system. |
Installer Privileges | The installation requires administrator (root) privileges on the target machine. |
Verify that the system has a network adapter installed.
The following example shows a system with an installed adapter card:# lspci -v | grep Mellanox 86:00.0 Network controller [0207]: Mellanox Technologies MT27710 Family Subsystem: Mellanox Technologies Device 0014 86:00.1 Network controller [0207]: Mellanox Technologies MT27710 Family Subsystem: Mellanox Technologies Device 0014
2. Download the ISO image to your host.
The image’s name has the format MLNX_OFED_LINUX-<ver>-<OS label><CPU arch>.iso.
You can download and install the latest OpenFabrics Enterprise Distribution (OFED) software package available via the NVIDIA web site at nvidia.com/en-us/networking → Products → Software → InfiniBand Drivers →NVIDIA MLNX_OFEDScroll down to the Download wizard, and click the Download tab.
Choose your relevant package depending on your host operating system.
Click the desired ISO/tgz package.
To obtain the download link, accept the End User License Agreement (EULA).
3. Use the Hash utility to confirm the file integrity of your ISO image. Run the following command and compare the result to the value provided on the download page.
SHA256 MLNX_OFED_LINUX-<ver>-<OS label>.iso
Installing MLNX_OFED
Installation Script
The installation script, mlnxofedinstall, performs the following:
Discovers the currently installed kernel
Uninstalls any software stacks that are part of the standard operating system distribution or another vendor's commercial stack
Installs the MLNX_OFED_LINUX binary RPMs (if they are available for the current kernel)
Identifies the currently installed InfiniBand and Ethernet network adapters and automatically upgrades the firmware
Note: To perform a firmware upgrade using customized firmware binaries, a path can be provided to the folder that contains the firmware binary files, by running --fw-image-dir. Using this option, the firmware version embedded in the MLNX_OFED package will be ignored.
Example:./mlnxofedinstall --fw-image-dir /tmp/my_fw_bin_files
WarningIf the driver detects unsupported cards on the system, it will abort the installation procedure. To avoid this, make sure to add --skip-unsupported-devices-check flag during installation.
Usage
./mnt/mlnxofedinstall [OPTIONS]
The installation script removes all previously installed OFED packages and re-installs from scratch. You will be prompted to acknowledge the deletion of the old packages.
WarningPre-existing configuration files will be saved with the extension “.conf.rpmsave”.
If you need to install OFED on an entire (homogeneous) cluster, a common strategy is to mount the ISO image on one of the cluster nodes and then copy it to a shared file system such as NFS. To install on all the cluster nodes, use cluster-aware tools (suchaspdsh).
If your kernel version does not match with any of the offered pre-built RPMs, you can add your kernel version by using the “mlnx_add_kernel_support.sh” script located inside the MLNX_OFED package.
WarningOn Redhat and SLES distributions with errata kernel installed there is no need to use the mlnx_add_kernel_support.sh script. The regular installation can be performed and weak-updates mechanism will create symbolic links to the MLNX_OFED kernel modules.
WarningIf you regenerate kernel modules for a custom kernel (using --add-kernel-support), the packages installation will not involve automatic regeneration of the initramfs. In some cases, such as a system with a root filesystem mounted over a ConnectX card, not regenerating the initramfs may even cause the system to fail to reboot.
In such cases, the installer will recommend running the following command to update the initramfs:
dracut -f
On some OSs, dracut -f might result in the following error message which can be safely ignore.
libkmod: kmod_module_new_from_path: kmod_module 'mdev' already exists with different path
The “mlnx_add_kernel_support.sh” script can be executed directly from the mlnxofedinstall script. For further information, please see '--add-kernel-support' option below.
WarningOn Ubuntu and Debian distributions drivers installation use Dynamic Kernel Module Support (DKMS) framework. Thus, the drivers' compilation will take place on the host during MLNX_OFED installation.
Therefore, using "mlnx_add_kernel_support.sh" is irrelevant on Ubuntu and Debian distributions.Example: The following command will create a MLNX_OFED_LINUX ISO image for RedHat 7.3 under the /tmp directory.
# ./MLNX_OFED_LINUX-x.x-x-rhel7.
3
-x86_64/mlnx_add_kernel_support.sh -m /tmp/MLNX_OFED_LINUX-x.x-x-rhel7.3
-x86_64/ --make-tgz Note: This program will create MLNX_OFED_LINUX TGZfor
rhel7.3
under /tmp directory. All Mellanox, OEM, OFED, or Distribution IB packages will be removed. Do you want tocontinue
?[y/N]:y See log file /tmp/mlnx_ofed_iso.21642
.log Building OFED RPMs. Please wait... Removing OFED RPMs... Created /tmp/MLNX_OFED_LINUX-x.x-x-rhel7.3
-x86_64-ext.tgzThe script adds the following lines to /etc/security/limits.conf for the userspace components such as MPI:
* soft memlock unlimited
* hard memlock unlimited
These settings set the amount of memory that can be pinned by a userspace application to unlimited. If desired, tune the value unlimited to a specific amount of RAM.
For your machine to be part of the InfiniBand/VPI fabric, a Subnet Manager must be running on one of the fabric nodes. At this point, OFED for Linux has already installed the OpenSM Subnet Manager on your machine.
For the list of installation options, run:
./mlnxofedinstall --h
Installation Procedure
This section describes the installation procedure of MLNX_OFED on NVIDIA adapter cards.
Log in to the installation machine as root.
Mount the ISO image on your machine.
host1# mount -o ro,loop MLNX_OFED_LINUX-<ver>-<OS label>-<CPU arch>.iso /mnt
Run the installation script.
/mnt/mlnxofedinstall Logs dir: /tmp/MLNX_OFED_LINUX-x.x-x.logs This program will install the MLNX_OFED_LINUX
package
on your machine. Note that all other Mellanox, OEM, OFED, RDMA or Distribution IB packages will be removed. Those packages are removed due to conflicts with MLNX_OFED_LINUX,do
not reinstall them. Starting MLNX_OFED_LINUX-x.x.x installation ... ........ ........ Installation finished successfully. Attempting to perform Firmware update... Querying Mellanox devices firmware ...WarningFor unattended installation, use the --force installation option while running the MLNX_OFED installation script:
/mnt/mlnxofedinstall --forceWarningMLNX_OFED for Ubuntu should be installed with the following flags in chroot environment:
./mlnxofedinstall --without-dkms --add-kernel-support --kernel <kernel version in chroot> --without-fw-update --force
For example:
./mlnxofedinstall --without-dkms --add-kernel-support --kernel 3.13.0-85-generic --without-fw-update --force
Note that the path to kernel sources (--kernel-sources) should be added if the sources are not in their default location.WarningIn case your machine has the latest firmware, no firmware update will occur and the installation script will print at the end of installation a message similar to the following:
Device #1:
----------
Device Type: ConnectX-X
Part Number: MCXXXX-XXX
PSID: MT_2190110032
PCI Device Name: 0b:00.0
Base MAC: 0000e41d2d5cf810
Versions: Current Available
FW 12.14.0114 12.14.0114
Status: Up to dateWarningIn case your machine has an unsupported network adapter device, no firmware update will occur and one of the error messages below will be printed. Please contact your hardware vendor for help with firmware updates.
Error message #1:
Device #1:
----------
Device Type: ConnectX-X
Part Number: MCXXXX-XXX
PSID: MT_2190110032
PCI Device Name: 0b:00.0
Base MAC: 0000e41d2d5cf810
Versions: Current Available
FW 12.14.0114 N/A
Status: No matching image foundError message #2:
The firmware for this device is not distributed inside NVIDIA driver: 0000:01:00.0 (PSID: IBM2150110033)
To obtain firmware for this device, please contact your HW vendor.Case A: If the installation script has performed a firmware update on your network adapter, you need to either restart the driver or reboot your system before the firmware update can take effect. Refer to the table below to find the appropriate action for your specific card.
Action \ Adapter
Driver Restart
Standard Reboot (Soft Reset)
Cold Reboot (Hard Reset)
Standard ConnectX-4/ConnectX-4 Lx or higher
-
+
-
Adapters with Multi-Host Support
-
-
+
Socket Direct Cards
-
-
+
Case B: If the installations script has not performed a firmware upgrade on your network adapter, restart the driver by running: “/etc/init.d/openibd restart”.
(InfiniBand only) Run the hca_self_test.ofed utility to verify whether or not the InfiniBand link is up. The utility also checks for and displays additional information such as:
HCA firmware version
Kernel architecture
Driver version
Number of active HCA ports along with their states
Node GUID
For more details on hca_self_test.ofed, see the file docs/readme_and_user_manual/hca_self_test.readme.
After installation completion, information about the OFED installation, such as prefix, kernel version, and installation parameters can be retrieved by running the command /etc/infiniband/info. Most of the OFED components can be configured or reconfigured after the installation, by modifying the relevant configuration files. See the relevant chapters in this manual for details.
The list of the modules that will be loaded automatically upon boot can be found in the /etc/infiniband/openib.conf file.WarningInstalling OFED will replace the RDMA stack and remove existing 3rd party RDMA connectors.
Installation Results
Software
Most of MLNX_OFED packages are installed under the “/usr” directory except for the following packages which are installed under the “/opt” directory:
fca and ibutils
iproute2 (rdma tool) - installed under /opt/Mellanox/iproute2/sbin/rdma
The kernel modules are installed under
/lib/modules/`uname -r`/updates on SLES and Fedora Distributions
/lib/modules/`uname -r`/extra/mlnx-ofa_kernel on RHEL and other RedHat like Distributions
/lib/modules/`uname -r`/updates/dkms/ on Ubuntu
Firmware
The firmware of existing network adapter devices will be updated if the following two conditions are fulfilled:
The installation script is run in default mode; that is, without the option ‘--without- fw-update’
The firmware version of the adapter device is older than the firmware version included with the OFED ISO image
Note: If an adapter’s Flash was originally programmed with an Expansion ROM image, the automatic firmware update will also burn an Expansion ROM image.
In case your machine has an unsupported network adapter device, no firmware update will occur and the error message below will be printed.
"The firmware for this device is not distributed inside NVIDIA driver: 0000:01:00.0 (PSID: IBM2150110033)
To obtain firmware for this device, please contact your HW vendor."
Installation Logging
While installing MLNX_OFED, the install log for each selected package will be saved in a separate log file.
The path to the directory containing the log files will be displayed after running the installation script in the following format:
Example:
Logs dir: /tmp/MLNX_OFED_LINUX-
4.4
-1.0
.0.0
.IBMM2150110033.logsDriver Load Upon System Boot
Upon system boot, the NVIDIA drivers will be loaded automatically.
To prevent the automatic load of the NVIDIA drivers upon system boot:
Add the following lines to the "/etc/modprobe.d/mlnx.conf" file.
blacklist mlx5_core blacklist mlx5_ib
Set “ONBOOT=no” in the "/etc/infiniband/openib.conf" file.
If the modules exist in the initramfs file, they can automatically be loaded by the kernel. To prevent this behavior, update the initramfs using the operating systems’ standard tools.Note: The process of updating the initramfs will add the blacklists from step 1, and will prevent the kernel from loading the modules automatically.
mlnxofedinstall Return Codes
The table below lists the mlnxofedinstall script return codes and their meanings.
Return Code
Meaning
0
The Installation ended successfully
1
The installation failed
2
No firmware was found for the adapter device
22
Invalid parameter
28
Not enough free space
171
Not applicable to this system configuration. This can occur when the required hardware is not present on the system
172
Prerequisites are not met. For example, missing the required software installed or the hardware is not configured correctly
173
Failed to start the mst driver
Software
Most of MLNX_OFED packages are installed under the “/usr” directory except for the following packages which are installed under the “/opt” directory:
fca and ibutils
iproute2 (rdma tool) - installed under /opt/Mellanox/iproute2/sbin/rdma
The kernel modules are installed under
/lib/modules/`uname -r`/updates on SLES and Fedora Distributions
/lib/modules/`uname -r`/extra/mlnx-ofa_kernel on RHEL and other RedHat like Distributions
/lib/modules/`uname -r`/updates/dkms/ on Ubuntu
Firmware
The firmware of existing network adapter devices will be updated if the following two conditions are fulfilled:
The installation script is run in default mode; that is, without the option ‘--without- fw-update’
The firmware version of the adapter device is older than the firmware version included with the OFED ISO image
Note: If an adapter’s Flash was originally programmed with an Expansion ROM image, the automatic firmware update will also burn an Expansion ROM image.
In case your machine has an unsupported network adapter device, no firmware update will occur and the error message below will be printed.
"The firmware for this device is not distributed inside NVIDIA driver: 0000:01:00.0 (PSID: IBM2150110033)
To obtain firmware for this device, please contact your HW vendor."
Installation Logging
While installing MLNX_OFED, the install log for each selected package will be saved in a separate log file.
The path to the directory containing the log files will be displayed after running the installation script in the following format:
Example:
Logs dir: /tmp/MLNX_OFED_LINUX-
4.4
-1.0
.0.0
.IBMM2150110033.logsUninstalling MLNX_OFED
Use the script /usr/sbin/ofed_uninstall.sh to uninstall the MLNX_OFED package. The script is part of the ofed-scripts RPM.
Additional Installation Procedures
Installing MLNX_OFED Using YUM
This type of installation is applicable to RedHat/OL and Fedora operating systems.
Setting up MLNX_OFED YUM Repository
Log into the installation machine as root.
Mount the ISO image on your machine and copy its content to a shared location in your network.
# mount -o ro,loop MLNX_OFED_LINUX-<ver>-<OS label>-<CPU arch>.iso /mnt
Download and install NVIDIA's GPG-KEY:
The key can be downloaded via the following link:
http://www.mellanox.com/downloads/ofed/RPM-GPG-KEY-Mellanox# wget http:
//www.mellanox.com/downloads/ofed/RPM-GPG-KEY-Mellanox
--2018
-01
-25
13
:52
:30
-- http://www.mellanox.com/downloads/ofed/RPM-GPG-KEY-Mellanox
Resolving www.mellanox.com...72.3
.194.0
Connecting to www.mellanox.com|72.3
.194.0
|:80
... connected. HTTP request sent, awaiting response...200
OK Length:1354
(1
.3K) [text/plain] Saving to: ?RPM-GPG-KEY-Mellanox?100
%[=================================================>]1
,354
--.-K/s in 0s2018
-01
-25
13
:52
:30
(247
MB/s) - ?RPM-GPG-KEY-Mellanox? saved [1354
/1354
]Install the key.
# sudo rpm --
import
RPM-GPG-KEY-Mellanox warning: rpmts_HdrFromFdno: Header V3 DSA/SHA1 Signature, key ID 6224c050: NOKEY Retrieving key from file:///repos/MLNX_OFED/<MLNX_OFED file>/RPM-GPG-KEY-Mellanox
Importing GPG key0x6224C050
: Userid:"Mellanox Technologies (Mellanox Technologies - Signing Key v2) <support@mellanox.com>"
From : /repos/MLNX_OFED/<MLNX_OFED file>/RPM-GPG-KEY-Mellanox Isthis
ok [y/N]:Check that the key was successfully imported.
# rpm -q gpg-pubkey --qf
'%{NAME}-%{VERSION}-%{RELEASE}\t%{SUMMARY}\n'
| grep Mellanox gpg-pubkey-a9e4b643-520791ba gpg(Mellanox Technologies <support@mellanox
.com>)Create a yum repository configuration file called "/etc/yum.repos.d/mlnx_ofed.repo" with the following content:
[mlnx_ofed] name=MLNX_OFED Repository baseurl=file:
///<path to extracted MLNX_OFED package>/RPMS
enabled=1
gpgkey=file:///<path to the downloaded key RPM-GPG-KEY-Mellanox>
gpgcheck=1
Check that the repository was successfully added.
# yum repolist Loaded plugins: product-id, security, subscription-manager This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register. repo id repo name status mlnx_ofed MLNX_OFED Repository
108
rpmforge RHEL 6Server - RPMforge.net - dag4
,597
repolist:8
,351
Setting up MLNX_OFED YUM Repository Using --add-kernel-support
Log into the installation machine as root.
Mount the ISO image on your machine and copy its content to a shared location in your network.
# mount -o ro,loop MLNX_OFED_LINUX-<ver>-<OS label>-<CPU arch>.iso /mnt
Build the packages with kernel support and create the tarball.
# /mnt/mlnx_add_kernel_support.sh --make-tgz <optional --kmp> -k $(uname -r) -m /mnt/ Note: This program will create MLNX_OFED_LINUX TGZ
for
rhel7.6
under /tmp directory. Do you want tocontinue
?[y/N]:y See log file /tmp/mlnx_iso.4120_logs/mlnx_ofed_iso.4120
.log Checkingif
all needed packages are installed... Building MLNX_OFED_LINUX RPMS . Please wait... Creating metadata-rpmsfor
3.10
.0
-957.21
.3
.el7.x86_64 ... WARNING: If you are going to configurethis
package
as a repository, then please note WARNING: that it contains unsigned rpms, therefore, you need to disable the gpgcheck WARNING: by setting'gpgcheck=0'
in the repository conf file. Created /tmp/MLNX_OFED_LINUX-5.2
-0.5
.5.0
-rhel7.6
-x86_64-ext.tgzOpen the tarball.
# cd /tmp/ # tar -xvf /tmp/MLNX_OFED_LINUX-
5.2
-0.5
.5.0
-rhel7.6
-x86_64-ext.tgzCreate a YUM repository configuration file called "/etc/yum.repos.d/mlnx_ofed.repo" with the following content:
[mlnx_ofed] name=MLNX_OFED Repository baseurl=file:
///<path to extracted MLNX_OFED package>/RPMS
enabled=1
gpgcheck=0
Check that the repository was successfully added.
# yum repolist Loaded plugins: product-id, security, subscription-manager This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register. repo id repo name status mlnx_ofed MLNX_OFED Repository
108
rpmforge RHEL 6Server - RPMforge.net - dag4
,597
repolist:8
,351
Installing MLNX_OFED Using the YUM Tool
After setting up the YUM repository for MLNX_OFED package, perform the following:
View the available package groups by invoking:
# yum search mlnx-ofed- mlnx-ofed-all.noarch : MLNX_OFED all installer
package
(with KMP support) mlnx-ofed-all-user-only.noarch : MLNX_OFED all-user-only installerpackage
(User Space packages only) mlnx-ofed-basic.noarch : MLNX_OFED basic installerpackage
(with KMP support) mlnx-ofed-basic-user-only.noarch : MLNX_OFED basic-user-only installerpackage
(User Space packages only) mlnx-ofed-bluefield.noarch : MLNX_OFED bluefield installerpackage
(with KMP support) mlnx-ofed-bluefield-user-only.noarch : MLNX_OFED bluefield-user-only installerpackage
(User Space packages only) mlnx-ofed-dpdk.noarch : MLNX_OFED dpdk installerpackage
(with KMP support) mlnx-ofed-dpdk-upstream-libs.noarch : MLNX_OFED dpdk-upstream-libs installerpackage
(with KMP support) mlnx-ofed-dpdk-upstream-libs-user-only.noarch : MLNX_OFED dpdk-upstream-libs-user-only installerpackage
(User Space packages only) mlnx-ofed-dpdk-user-only.noarch : MLNX_OFED dpdk-user-only installerpackage
(User Space packages only) mlnx-ofed-eth-only-user-only.noarch : MLNX_OFED eth-only-user-only installerpackage
(User Space packages only) mlnx-ofed-guest.noarch : MLNX_OFED guest installerpackage
(with KMP support) mlnx-ofed-guest-user-only.noarch : MLNX_OFED guest-user-only installerpackage
(User Space packages only) mlnx-ofed-hpc.noarch : MLNX_OFED hpc installerpackage
(with KMP support) mlnx-ofed-hpc-user-only.noarch : MLNX_OFED hpc-user-only installerpackage
(User Space packages only) mlnx-ofed-hypervisor.noarch : MLNX_OFED hypervisor installerpackage
(with KMP support) mlnx-ofed-hypervisor-user-only.noarch : MLNX_OFED hypervisor-user-only installerpackage
(User Space packages only) mlnx-ofed-kernel-only.noarch : MLNX_OFED kernel-only installerpackage
(with KMP support) mlnx-ofed-vma.noarch : MLNX_OFED vma installerpackage
(with KMP support) mlnx-ofed-vma-eth.noarch : MLNX_OFED vma-eth installerpackage
(with KMP support) mlnx-ofed-vma-eth-user-only.noarch : MLNX_OFED vma-eth-user-only installerpackage
(User Space packages only) mlnx-ofed-vma-user-only.noarch : MLNX_OFED vma-user-only installerpackage
(User Space packages only) mlnx-ofed-vma-vpi.noarch : MLNX_OFED vma-vpi installerpackage
(with KMP support) mlnx-ofed-vma-vpi-user-only.noarch : MLNX_OFED vma-vpi-user-only installerpackage
(User Space packages onlywhere:
mlnx-ofed-all
Installs all available packages in MLNX_OFED
mlnx-ofed-basic
Installs basic packages required for running NVIDIA cards
mlnx-ofed-guest
Installs packages required by guest OS
mlnx-ofed-hpc
Installs packages required for HPC
mlnx-ofed-hypervisor
Installs packages required by hypervisor OS
mlnx-ofed-vma
Installs packages required by VMA
mlnx-ofed-vma-eth
Installs packages required by VMA to work over Ethernet
mlnx-ofed-vma-vpi
Installs packages required by VMA to support VPI
bluefield
Installs packages required for BlueField
dpdk
Installs packages required for DPDK
dpdk-upstream-libs
Installs packages required for DPDK using RDMA-Core
kernel-only
Installs packages required for a non-default kernel
Note: MLNX_OFED provides kernel module RPM packages with KMP support for RHEL and SLES. For other operating systems, kernel module RPM packages are provided only for the operating system's default kernel. In this case, the group RPM packages have the supported kernel version in their package's name.
Example:mlnx-ofed-all-
3.17
.4
-301
.fc21.x86_64.noarch : MLNX_OFED all installerpackage
for
kernel3.17
.4
-301
.fc21.x86_64 (without KMP support) mlnx-ofed-basic-3.17
.4
-301
.fc21.x86_64.noarch : MLNX_OFED basic installerpackage
for
kernel3.17
.4
-301
.fc21.x86_64 (without KMP support) mlnx-ofed-guest-3.17
.4
-301
.fc21.x86_64.noarch : MLNX_OFED guest installerpackage
for
kernel3.17
.4
-301
.fc21.x86_64 (without KMP support) mlnx-ofed-hpc-3.17
.4
-301
.fc21.x86_64.noarch : MLNX_OFED hpc installerpackage
for
kernel3.17
.4
-301
.fc21.x86_64 (without KMP support) mlnx-ofed-hypervisor-3.17
.4
-301
.fc21.x86_64.noarch : MLNX_OFED hypervisor installerpackage
for
kernel3.17
.4
-301
.fc21.x86_64 (without KMP support) mlnx-ofed-vma-3.17
.4
-301
.fc21.x86_64.noarch : MLNX_OFED vma installerpackage
for
kernel3.17
.4
-301
.fc21.x86_64 (without KMP support) mlnx-ofed-vma-eth-3.17
.4
-301
.fc21.x86_64.noarch : MLNX_OFED vma-eth installerpackage
for
kernel3.17
.4
-301
.fc21.x86_64 (without KMP support) mlnx-ofed-vma-vpi-3.17
.4
-301
.fc21.x86_64.noarch : MLNX_OFED vma-vpi installerpackage
for
kernel3.17
.4
-301
.fc21.x86_64 (without KMP support) mlnx-ofed-hypervisor-3.17
.4
-301
.fc21.x86_64.noarch : MLNX_OFED hypervisor installerpackage
for
kernel3.17
.4
-301
.fc21.x86_64 (without KMP support) mlnx-ofed-vma-3.17
.4
-301
.fc21.x86_64.noarch : MLNX_OFED vma installerpackage
for
kernel3.17
.4
-301
.fc21.x86_64 (without KMP support) mlnx-ofed-vma-eth-3.17
.4
-301
.fc21.x86_64.noarch : MLNX_OFED vma-eth installerpackage
for
kernel3.17
.4
-301
.fc21.x86_64 (without KMP support) mlnx-ofed-vma-vpi-3.17
.4
-301
.fc21.x86_64.noarch : MLNX_OFED vma-vpi installerpackage
for
kernel3.17
.4
-301
.fc21.x86_64 (without KMP support)When using an operating system different than RHEL or SLES, or you have installed a kernel that is not supported by default in MLNX_OFED, you can use the mlnx_add_kernel_support.sh script to build MLNX_OFED for your kernel.
The script will automatically build the matching group RPM packages for your kernel so that you can still install MLNX_OFED via yum.
Please note that the resulting MLNX_OFED repository will contain unsigned RPMs, therefore, you should set 'gpgcheck=0' in the repository configuration file.Install the desired group.
# yum install mlnx-ofed-all Loaded plugins: langpacks, product-id, subscription-manager Resolving Dependencies --> Running transaction check ---> Package mlnx-ofed-all.noarch
0
:3.1
-0.1
.2
will be installed --> Processing Dependency: kmod-isert =1.0
-OFED.3.1
.0.1
.2.1
.g832a737.rhel7u1for
package
: mlnx-ofed-all-3.1
-0.1
.2
.noarch .................. .................. qperf.x86_640
:0.4
.9
-9
rds-devel.x86_640
:2.0
.7
-1.12
rds-tools.x86_640
:2.0
.7
-1.12
sdpnetstat.x86_640
:1.60
-26
srptools.x86_640
:1.0
.2
-12
Complete!
WarningInstalling MLNX_OFED using the “YUM” tool does not automatically update the firmware.
To update the firmware to the version included in MLNX_OFED package, run:
# yum install mlnx-fw-updaterInstalling MLNX_OFED Using apt-get
This type of installation is applicable to Debian and Ubuntu operating systems.
Setting up MLNX_OFED apt-get Repository
Log into the installation machine as root.
Extract the MLNX_OFED package on a shared location in your network.
It can be downloaded from https://www.nvidia.com/en-us/networking/ → Products → Software→ InfiniBand Drivers.Create an apt-get repository configuration file called "/etc/apt/sources.list.d/mlnx_ofed.list" with the following content:
deb file:/<path to extracted MLNX_OFED
package
>/DEBS ./Download and install NVIDIA's Technologies GPG-KEY.
# wget -qO - http:
//www.mellanox.com/downloads/ofed/RPM-GPG-KEY-Mellanox | sudo apt-key add -
Verify that the key was successfully imported.
# apt-key list pub 1024D/A9E4B643
2013
-08
-11
uid Mellanox Technologies <support@mellanox
.com> sub 1024g/09FCC2692013
-08
-11
Update the apt-get cache.
# sudo apt-get update
Setting up MLNX_OFED apt-get Repository Using --add-kernel-support
Log into the installation machine as root.
Mount the ISO image on your machine and copy its content to a shared location in your network.
# mount -o ro,loop MLNX_OFED_LINUX-<ver>-<OS label>-<CPU arch>.iso /mnt
Build the packages with kernel support and create the tarball.
# /mnt/mlnx_add_kernel_support.sh --make-tgz <optional --kmp> -k $(uname -r) -m /mnt/ Note: This program will create MLNX_OFED_LINUX TGZ
for
rhel7.6
under /tmp directory. Do you want tocontinue
?[y/N]:y See log file /tmp/mlnx_iso.4120_logs/mlnx_ofed_iso.4120
.log Checkingif
all needed packages are installed... Building MLNX_OFED_LINUX RPMS . Please wait... Creating metadata-rpmsfor
3.10
.0
-957.21
.3
.el7.x86_64 ... WARNING: If you are going to configurethis
package
as a repository, then please note WARNING: that it contains unsigned rpms, therefore, you need to disable the gpgcheck WARNING: by setting'gpgcheck=0'
in the repository conf file. Created /tmp/MLNX_OFED_LINUX-5.2
-0.5
.5.0
-rhel7.6
-x86_64-ext.tgzOpen the tarball.
# cd /tmp/ # tar -xvf /tmp/MLNX_OFED_LINUX-
5.2
-0.5
.5.0
-rhel7.6
-x86_64-ext.tgzCreate an apt-get repository configuration file called "/etc/apt/sources.list.d/mlnx_ofed.list" with the following content:
deb [trusted=yes] file:/<path to extracted MLNX_OFED
package
>/DEBS ./Update the apt-get cache.
# sudo apt-get update
Installing MLNX_OFED Using the apt-get Tool
After setting up the apt-get repository for MLNX_OFED package, perform the following:
View the available package groups by invoking:
# apt-cache search mlnx-ofed- apt-cache search mlnx-ofed ........ knem-dkms - DKMS support
for
mlnx-ofed kernel modules mlnx-ofed-kernel-dkms - DKMS supportfor
mlnx-ofed kernel modules mlnx-ofed-kernel-utils - Userspace tools to restart and tune mlnx-ofed kernel modules mlnx-ofed-vma-vpi - MLNX_OFED vma-vpi installerpackage
(with DKMS support) mlnx-ofed-kernel-only - MLNX_OFED kernel-only installerpackage
(with DKMS support) mlnx-ofed-bluefield - MLNX_OFED bluefield installerpackage
(with DKMS support) mlnx-ofed-hpc-user-only - MLNX_OFED hpc-user-only installerpackage
(User Space packages only) mlnx-ofed-dpdk-user-only - MLNX_OFED dpdk-user-only installerpackage
(User Space packages only) mlnx-ofed-all-exact - MLNX_OFED all installerpackage
(with DKMS support) (exact) mlnx-ofed-all - MLNX_OFED all installerpackage
(with DKMS support) mlnx-ofed-vma-vpi-user-only - MLNX_OFED vma-vpi-user-only installerpackage
(User Space packages only) mlnx-ofed-eth-only-user-only - MLNX_OFED eth-only-user-only installerpackage
(User Space packages only) mlnx-ofed-vma-user-only - MLNX_OFED vma-user-only installerpackage
(User Space packages only) mlnx-ofed-hpc - MLNX_OFED hpc installerpackage
(with DKMS support) mlnx-ofed-bluefield-user-only - MLNX_OFED bluefield-user-only installerpackage
(User Space packages only) mlnx-ofed-dpdk - MLNX_OFED dpdk installerpackage
(with DKMS support) mlnx-ofed-vma-eth-user-only - MLNX_OFED vma-eth-user-only installerpackage
(User Space packages only) mlnx-ofed-all-user-only - MLNX_OFED all-user-only installerpackage
(User Space packages only) mlnx-ofed-vma-eth - MLNX_OFED vma-eth installerpackage
(with DKMS support) mlnx-ofed-vma - MLNX_OFED vma installerpackage
(with DKMS support) mlnx-ofed-dpdk-upstream-libs-user-only - MLNX_OFED dpdk-upstream-libs-user-only installerpackage
(User Space packages only) mlnx-ofed-basic-user-only - MLNX_OFED basic-user-only installerpackage
(User Space packages only) mlnx-ofed-basic-exact - MLNX_OFED basic installerpackage
(with DKMS support) (exact) mlnx-ofed-basic - MLNX_OFED basic installerpackage
(with DKMS support) mlnx-ofed-dpdk-upstream-libs - MLNX_OFED dpdk-upstream-libs installerpackage
(with DKMS support)where:
mlnx-ofed-all
MLNX_OFED all installer package
mlnx-ofed-basic
MLNX_OFED basic installer package
mlnx-ofed-vma
MLNX_OFED vma installer package
mlnx-ofed-hpc
MLNX_OFED HPC installer package
mlnx-ofed-vma-eth
MLNX_OFED vma-eth installer package
mlnx-ofed-vma-vpi
MLNX_OFED vma-vpi installer package
knem-dkms
MLNX_OFED DKMS support for mlnx-ofed kernel modules
kernel-dkms
MLNX_OFED kernel-dkms installer package
kernel-only
MLNX_OFED kernel-only installer package
bluefield
MLNX_OFED bluefield installer package
mlnx-ofed-all-exact
MLNX_OFED mlnx-ofed-all-exact installer package
dpdk
MLNX_OFED dpdk installer package
mlnx-ofed-basic-exact
MLNX_OFED mlnx-ofed-basic-exact installer package
dpdk-upstream-libs
MLNX_OFED dpdk-upstream-libs installer package
Install the desired group.
apt-get install
'<group name>'
Example:
apt-get install mlnx-ofed-all
WarningInstalling MLNX_OFED using the “apt-get” tool does not automatically update the firmware.
To update the firmware to the version included in MLNX_OFED package, run:
# apt-get install mlnx-fw-updater
Performance Tuning
Depending on the application of the user's system, it may be necessary to modify the default configuration of network adapters based on the ConnectX® adapters. In case that tuning is required, please refer to the Performance Tuning Guide for NVIDIA Network Adapters.