Specifications
Physical | Size: 4.52in. x 2.99in. (115mm x 76mm) | ||||
Connector: Dual SFP28 Ethernet (copper and optical) | |||||
Bracket: Thumbscrew Bracket | |||||
Protocol Support | Ethernet: 10GBASE-SR, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII | ||||
Data Rate: 1/10 Gb/s Ethernet | |||||
PCI Express Gen3: SERDES @ 8.0GT/s, 8 lanes (2.0 and 1.1 compatible) | |||||
Power and Airflow | Voltage: 3.3V_EDGE, 12V_EDGE | ||||
Power | Cable Type | Active Mode | Standby Mode | ||
12V_EDGE | 3.3V_EDGE | ||||
Typical Power(a) | Passive Cables | 8.47W | 25mW | 3.3W | |
1.5W Active Cables | 12W | 25mW | 5W | ||
Maximum Power | Passive Cables | 10.35W | 25mW | 4.58W | |
1.5W Active Cables | 13.88W | 25mW | 6.35W | ||
Maximum power available through SFP28 port: 1.5W | |||||
Airflow | Cable Type | Heatsink to Port | Port to Heatsink | ||
Passive Cables | 150LFM | TBD | |||
Active 1.5W Cable | 300LFM | TBD | |||
Passive Cables | 100LFM(b) | TBD | |||
Active 1.5W Cable | 100LFM(b) | TBD | |||
Environmental | Temperature | Operational | 0°C to 55°C | ||
Non-operational | -40°C to 70°C | ||||
Humidity | Operational | 10% to 85% relative humidity | |||
Non-operational | 10% to 90% relative humidity | ||||
Altitude (Operational) | 3050m | ||||
Regulatory | Safety | CB / cTUVus / CE | |||
EMC | CE / FCC / VCCI / ICES / RCM | ||||
RoHS | RoHS compliant | ||||
Notes: a. Typical power for ATIS traffic load.
b. Maximum inlet temperature for standby mode is 45°C (according to OCP3 spec)
c. For both operational and non-operational states.
Physical | Size: 4.52in. x 2.99in. (115mm x 76mm) | ||||
Connector: Dual SFP28 Ethernet (copper and optical) | |||||
Bracket: Thumbscrew Bracket | |||||
Protocol Support | Ethernet: 25GBASE-R, 20GBASE-KR2, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII | ||||
Data Rate: 1/10/25 Gb/s Ethernet | |||||
PCI Express Gen3: SERDES @ 8.0GT/s, 8 lanes (2.0 and 1.1 compatible) | |||||
Power and Airflow | Voltage: 3.3V_EDGE, 12V_EDGE | ||||
Power | Cable Type | Active Mode | Standby Mode | ||
12V_EDGE | 3.3V_EDGE | ||||
Typical Power(a) | Passive Cables | 8.82W | 25mW | 3.3W | |
1.5W Active Cables | 12.36W | 25mW | 5W | ||
Maximum Power | Passive Cables | 10.82W | 25mW | 4.58W | |
1.5W Active Cables | 14.35W | 25mW | 6.35W | ||
Maximum power available through SFP28 port: 1.5W | |||||
Airflow | Cable Type | Heatsink to Port | Port to Heatsink | ||
Passive Cables | 150LFM | TBD | |||
Active 1.5W Cable | 300LFM | TBD | |||
Passive Cables | 100LFM(b) | TBD | |||
Active 1.5W Cable | 100LFM(b) | TBD | |||
Environmental | Temperature | Operational | 0°C to 55°C | ||
Non-operational | -40°C to 70°C | ||||
Humidity | Operational | 10% to 85% relative humidity | |||
Non-operational | 10% to 90% relative humidity | ||||
Altitude (Operational) | 3050m | ||||
Regulatory | Safety | CB / cTUVus / CE | |||
EMC | CE / FCC / VCCI / ICES / RCM | ||||
RoHS | RoHS compliant | ||||
Notes: a. Typical power for ATIS traffic load.
b. Maximum inlet temperature for standby mode is 45°C (according to OCP3 spec)
c. For both operational and non-operational states.
Board Mechanical Drawing and Dimensions
All dimensions are in millimeters. PCB mechanical tolerance is +/- 0.13mm.