Specifications
Physical |
Adapter Card Size: 2.71 in. x 5.6 in. (68.90mm x 142.24 mm) – low profile PCIe Auxiliary Cards Size: | ||
Connector: Single QSFP28 InfiniBand and Ethernet (copper and optical) | |||
Protocol Support |
InfiniBand: IBTA v1.3a Auto-Negotiation: 1X/2X/4X SDR (2.5Gb/s per lane), DDR (5Gb/s per lane), QDR (10Gb/s per lane), FDR10 (10.3125Gb/s per lane), FDR (14.0625Gb/s per lane), EDR (25Gb/s per lane) port | ||
Ethernet: 100GBASE-CR4, 100GBASE-KR4, 100GBASE-SR4, 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR | |||
Data Rate |
InfiniBand |
SDR/DDR/QDR/FDR/EDR | |
Ethernet |
1/10/25/40/50/100 Gb/s | ||
PCI Express Gen3: SERDES @ 16.0GT/s, 16 lanes (2.0 and 1.1 compatible) | |||
ConnectX-5 Main Adapter Card Power |
Voltage: 12V | ||
Power |
Cable | ||
Typical Power b |
Passive Cables |
17W | |
Maximum Power |
Passive Cables |
20W | |
1.5W Active Cables |
21.6W | ||
2.5W Active Cables |
22.7W | ||
Maximum power available through QSFP28 port: 2.5W | |||
PCIe Auxiliary Cards Power |
Typical Power |
1.5W | |
Maximum Power |
2W | ||
Airflow |
Airflow |
Cable Type |
Airflow Direction (Heatsink to Port) |
Passive Cable |
400LFM / 55°C | ||
NVIDIA 2.5W Active Cable |
400LFM / 55°C | ||
Environmental |
Temperature |
Operational |
0°C to 55°C |
Non-operational |
-40°C to 70°C C | ||
Humidity |
Operational |
10% to 85% relative humidity | |
Non-operational |
10% to 90% relative humidity | ||
Altitude (Operational) |
3050m | ||
Regulatory |
Safety: CB / cTUVus / CE | ||
EMC: CE / FCC / VCCI / ICES / RCM | |||
RoHS compliant |
a The ConnectX-5 adapters supplement the IBTA auto-negotiation specification to get better bit error rates and longer cable reaches. This supplemental feature only initiates when connected to another NVIDIA InfiniBand product.
b Typical power for ATIS traffic load.
c The non-operational storage temperature specifications apply to the product without its package.
All dimensions are in millimeters. The PCB mechanical tolerance is +/- 0.13mm.
Adapter Card Mechanical Drawing (Component Side)
PCIe Auxiliary Card Mechanical Drawing (Component Side)
Short Brackets Mechanical Drawing
All dimensions are in millimeters. The bracket mechanical tolerance is +/- 0.25mm.
ConnectX-5 Main Adapter Card Short Bracket

PCIe Auxiliary Card Short Bracket
