Bug Fixes History
Internal Ref.  | Description  | 
1725147  | Description: In devices that operate in Socket-Direct mode, the physical MAC of the auxiliary partitions is displayed as zeros instead of the actual MAC when the card is configured as InfiniBand.  | 
Keywords: Physical MAC, Boot menu, Socket-Direct  | |
Discovered in Version: 3.5.701  | |
Fixed in Release: 3.6.204  | |
843377/849223  | Description: The physical MAC assigned via the boot menu is displayed as zeroes instead of the set MAC when ConnectX-4 VPI adapter card is configured as InfiniBand.  | 
Keywords: Physical MAC, Boot menu  | |
Discovered in Version: 3.5.901  | |
Fixed in Release: 3.6.102  | |
1725147  | Description: In devices that operate in Socket-Direct mode, the physical MAC of the auxiliary partitions is displayed as zeros instead of the actual MAC when the card is configured as InfiniBand.  | 
Keywords: Physical MAC, Boot menu, Socket-Direct  | |
Discovered in Version: 3.5.701  | |
Fixed in Release: 3.6.102  | |
1447149  | Description: FlexBoot menu Link Speed configuration will be "NA" in case speed is configured to 50GBase-KR4  | 
Keywords: FlexBoot menu, Link Speed; 50GBase-KR4  | |
Discovered in Version: 3.5.504  | |
Fixed in Release: 3.5.803  | |
1072419  | Description: The FlexBoot DHCP loops indefinitely when it continuously gets NACK on the DHCP requests On some setups, it might also cause an RSOD after a a continues looping.  | 
Keywords: Bootloader grub2, WDS, RSOD  | |
Discovered in Release: 3.5.305  | |
Fixed in Release: 3.5.504  | |
1157875  | Description: Pressing any of the arrow keys during boot might cause the boot process to be aborted.  | 
Keywords: Abort boot, arrows, FlexBoot  | |
Discovered in Release: 3.5.305  | |
Fixed in Release: 3.5.403  | |
1113560  | Description: Fixed an issue that prevented the first iSCSI target parameters to be reset to their default values.  | 
Keywords: iSCSI target  | |
Discovered in Release: 3.5.110  | |
Fixed in Release: 3.5.305  | |
-  | Description: FlexBoot supports only 2K MTU.  | 
Keywords: Networking  | |
Discovered in Release: 3.4.903  | |
Fixed in Release: 3.5.210  | |
843209  | Description: Fixed and issue which cause the link not to raise in the second port which is set as IB when the first port is ETH in PXE.  | 
Keywords: Link up, Ports  | |
Discovered in Release: 3.4.903  | |
Fixed in Release: 3.5.109  | |
847950  | Description: Fixed wrong default value of Boot-To-Target in FlexBoot configuration.  | 
Keywords: Boot-To-Target, FlexBoot configuration  | |
Discovered in Release: 3.4.719  | |
Fixed in Release: 3.4.903  | |
691148  | Description: When connecting a pre-configured port with VLAN to an IB fabric, the port runs as Ethernet port with the VLAN tag.  | 
Keywords: VLAN, Port Management  | |
Discovered in Release: 3.4.719  | |
Fixed in Release: 3.4.903  | |
792432  | Description: Booting PXE using Grub2.X over HP G9/G8 servers results in system hang.  | 
Keywords: PXE boot, Grub2.X, HP G9/G8  | |
Discovered in Release: 3.4.719  | |
Fixed in Release: 3.4.903  | |
690792  | Description: If the PMM fails to allocate memory, the system hangs since FlexBoot cannot load from the expansion ROM.  | 
Keywords: PMM, expansion ROM  | |
Discovered in Release: 3.4.719  | |
Fixed in Release: 3.4.812  | |
697291  | Description: In ConnectX-4, the PXE boot time measurement over TFTP Ethernet is 1:30 min for image size of 1GB, TFTP InfiniBand is 1:20 min, and iSCSI boot time measure- ment is 8 seconds for image size of 25 MB.  | 
Keywords: PXE Boot  | |
Discovered in Release: 3.4.719  | |
Fixed in Release: 3.4.812  | |
689068  | Description: In hybrid BIOSes, if the BIOS loads legacy driver without closing the UEFI driver, the legacy driver fails to load.  | 
Keywords: BIOS, legacy mode  | |
Discovered in Release: 3.4.719  | |
Fixed in Release: 3.4.812  | |
634794  | Description: Enabled 'boot_pci_busdevfn' initialization when booting from UNDI loader.  | 
Keywords: UNDI loader  | |
Discovered in Release: 3.4.650  | |
Fixed in Release: 3.4.719  | |
-  | Description: Removed the instruction that enabled write-protected section modifications after POST.  | 
Keywords: PXE Boot  | |
Discovered in Release: 3.4.650  | |
Fixed in Release: 3.4.719  |