mstflint: Performing Checksum Calculation on Image/Device
The flint utility allows performing an MD5 checksum on the non-persistent sections of the firmware image. For example: the sections that are changed when performing a firmware upgrade.
To perform a checksum on the flash, run the following command line:# mstflint -d <mst device> checksumTo perform a checksum on a firmware image, run the following command line:
# mstflint -i <image file> checksumwhere:
|
device |
Flash device to verify. |
|
image file |
Image file to verify. |
Examples:mstflint -i fw-ConnectX4Lx.bin checksum -I- Calculating Checksum ... Checksum: 68ddae6bfe42f87f09084f3f468a35c6
mstflint -d 41:00.0
-I- Calculating Checksum ...
Checksum: 68ddae6bfe42f87f09084f3f468a35c6