|
Feature/Change |
Description |
|
23.10-1.1.9.0 |
|
|
Lightweight Local SFs |
Following the addition of the Lightweight Local SFs feature in version 23.07, in order to configure the scalable-functions, follow the revised instructions as detailed in the Step-by-Step Guide. Note: "Step 2.9 - Set all SF specific device parameters" is now mandatory for local SFs. |
The following are the new features and changes that were added in this version. The supported adapter cards are specified as follows:
|
Supported Cards |
Description |
|
All HCAs |
Supported in the following adapter cards unless specifically stated otherwise: ConnectX-4/ConnectX-4 Lx/ConnectX-5/ConnectX-6/ConnectX-6 Dx/ConnectX-6 Lx/ConnectX-7/BlueField-2 |
|
ConnectX-6 Dx and above |
Supported in the following adapter cards unless specifically stated otherwise: ConnectX-6 Dx/ConnectX-6 Lx/ConnectX-7/BlueField-2 |
|
ConnectX-6 and above |
Supported in the following adapter cards unless specifically stated otherwise: ConnectX-6/ConnectX-6 Dx/ConnectX-6 Lx/ConnectX-7/BlueField-2 |
|
ConnectX-5 and above |
Supported in the following adapter cards unless specifically stated otherwise: ConnectX-5/ConnectX-6/ConnectX-6 Dx/ConnectX-6 Lx/ConnectX-7/BlueField-2 |
|
ConnectX-4 and above |
Supported in the following adapter cards unless specifically stated otherwise: ConnectX-4/ConnectX-4 Lx/ConnectX-5/ConnectX-6/ConnectX-6 Dx/ConnectX-6 Lx/ConnectX-7/BlueField-2 |
For a list of features from previous versions see Release Notes Change Log History section.
|
Feature/Change |
Description |
|
23.10-1.1.9.0 |
|
|
General |
|
For additional information on the new features, please refer to the MLNX_EN User Manual.