Introduction
This manual is intended for system administrators responsible for the installation, configuration, management and maintenance of the software and hardware of Ethernet adapter cards. It is also intended for application developers.
This document provides information about MLNX_EN Linux driver, and instructions on how to install the driver on ConnectX network adapter solutions supporting the following uplinks to servers:
Uplink/NICs | Driver Name | Uplink Speed |
BlueField-2 | mlx5 |
|
BlueField |
| |
ConnectX-6 Dx |
| |
ConnectX-6 Lx |
| |
ConnectX-6 |
| |
ConnectX-5/ConnectX-5 Ex |
| |
ConnectX-4 Lx |
| |
ConnectX-4 |
|
56GbE is an NVIDIA proprietary link speed and can be achieved while connecting an NVIDIA adapter card to
NVIDIA SX10XX switch series or when connecting an NVIDIA adapter card to another NVIDIA adapter card.Supports both NRZ and PAM4 modes.
MLNX_EN driver release exposes the following capabilities:
Single/Dual port
Multiple Rx and Tx queues
Rx steering mode: Receive Core Affinity (RCA)
MSI-X or INTx
Adaptive interrupt moderation
HW Tx/Rx checksum calculation
Large Send Offload (i.e., TCP Segmentation Offload)
Large Receive Offload
Multi-core NAPI support
VLAN Tx/Rx acceleration (HW VLAN stripping/insertion)
Ethtool support
Net device statistics
SR-IOV support
Flow steering
Ethernet Time Stamping
Package Images
MLNX_EN is provided as an ISO image or as a tarball per Linux distribution and CPU architecture that includes source code and binary RPMs, firmware and utilities. The ISO image contains an installation script (called install) that performs the necessary steps to accomplish the following:
Discover the currently installed kernel
Uninstall any previously installed MLNX_OFED/MLNX_EN packages
Install the MLNX_EN binary RPMs (if they are available for the current kernel)
Identify the currently installed HCAs and perform the required firmware updates
Software Components
MLNX_EN contains the following software components:
Components | Description |
mlx5 driver | mlx5 is the low level driver implementation for the ConnectX-4 adapters. ConnectX-4 operates as a VPI adapter. |
mlx5_core | Acts as a library of common functions (e.g. initializing the device after reset) required by the ConnectX-4 adapter cards. |
mlx4 driver | mlx4 is the low level driver implementation for the ConnectX adapters. The ConnectX can operate as an InfiniBand adapter and as an Ethernet NIC. To accommodate the two flavors, the driver is split into modules: mlx4_core, mlx4_en, and mlx4_ib. Note: mlx4_ib is not part of this package. |
mstflint | An application to burn a firmware binary image. |
Software modules | Source code for all software modules (for use under conditions mentioned in the modules' LICENSE files) |
Firmware
The ISO image includes the following firmware item:
Firmware images (.bin format wrapped in the mlxfwmanager tool) for ConnectX®-4 and and above network adapters
Directory Structure
The tarball image of MLNX_EN contains the following files and directories:
install—the MLNX_EN installation script
uninstall.sh—the MLNX_EN un-installation script
RPMS/—directory of binary RPMs for a specific CPU architecture
src/—directory of the OFED source tarball
mlnx_add_kernel_support.sh—a script required to rebuild MLNX_EN for customized kernel version on supported Linux distribution
mlx5_core Module Parameters
The mlx5_core module supports a single parameter used to select the profile which defines the number of resources supported.
prof_sel | The parameter name for selecting the profile. The supported values for profiles are:
|
guids | charp |
node_guid | guids configuration. This module parameter will be obsolete! |
debug_mask | debug_mask: 1 = dump cmd data, 2 = dump cmd exec time, 3 = both. Default=0 (uint) |
probe_vf | probe VFs or not, 0 = not probe, 1 = probe. Default = 1 (bool) |
num_of_groups | Controls the number of large groups in the FDB flow table. Default=4; Range=1-1024 |
The following parameters, supported in mlx4 driver only, can be changed using the Devlink user interface:
Parameter | Description | Parameter Type |
internal_error_reset | Enables resetting the device on internal errors | Generic |
max_macs | Max number of MACs per ETH port | Generic |
region_snapshot_enable | Enables capturing region snapshots | Generic |
enable_64b_cqe_eqe | Enables 64 byte CQEs/EQEs when supported by FW | Driver-specific |
enable_4k_uar | Enables using 4K UAR | Driver-specific |