NVIDIA MLNX_EN Documentation v5.8-4.1.5.0 LTS

Installing MLNX_OFED

Warning

For installation of MLNX_OFED on Community OSs, please see section "Installation on Community Operating Systems" below.

The installation script, mlnxofedinstall, performs the following:

  • Discovers the currently installed kernel

  • Uninstalls any software stacks that are part of the standard operating system distribution or another vendor's commercial stack

  • Installs the MLNX_OFED_LINUX binary RPMs (if they are available for the current kernel)

  • Identifies the currently installed InfiniBand and Ethernet network adapters and automatically upgrades the firmware

    Note: To perform a firmware upgrade using customized firmware binaries, a path can be provided to the folder that contains the firmware binary files, by running --fw-image-dir. Using this option, the firmware version embedded in the MLNX_OFED package will be ignored.

    Example:

    Copy
    Copied!
                

    ./mlnxofedinstall --fw-image-dir /tmp/my_fw_bin_files

Warning

If the driver detects unsupported cards on the system, it will abort the installation procedure. To avoid this, make sure to add --skip-unsupported-devices-check flag during installation.

Usage

Copy
Copied!
            

./mnt/mlnxofedinstall [OPTIONS]

The installation script removes all previously installed OFED packages and re-installs from scratch. You will be prompted to acknowledge the deletion of the old packages.

Warning

Pre-existing configuration files will be saved with the extension “.conf.rpmsave”.

  • If you need to install OFED on an entire (homogeneous) cluster, a common strategy is to mount the ISO image on one of the cluster nodes and then copy it to a shared file system such as NFS. To install on all the cluster nodes, use cluster-aware tools (suchaspdsh).

  • If your kernel version does not match with any of the offered pre-built RPMs, you can add your kernel version by using the “mlnx_add_kernel_support.sh” script located inside the MLNX_OFED package.

    Warning

    On Redhat and SLES distributions with errata kernel installed there is no need to use the mlnx_add_kernel_support.sh script. The regular installation can be performed and weak-updates mechanism will create symbolic links to the MLNX_OFED kernel modules.

    Warning

    If you regenerate kernel modules for a custom kernel (using --add-kernel-support), the packages installation will not involve automatic regeneration of the initramfs. In some cases, such as a system with a root filesystem mounted over a ConnectX card, not regenerating the initramfs may even cause the system to fail to reboot.

    In such cases, the installer will recommend running the following command to update the initramfs:

    Copy
    Copied!
                

    dracut -f

    On some OSs, dracut -f might result in the following error message which can be safely ignore.

    libkmod: kmod_module_new_from_path: kmod_module 'mdev' already exists with different path

    The “mlnx_add_kernel_support.sh” script can be executed directly from the mlnxofedinstall script. For further information, please see '--add-kernel-support' option below.

    Warning

    On Ubuntu and Debian distributions drivers installation use Dynamic Kernel Module Support (DKMS) framework. Thus, the drivers' compilation will take place on the host during MLNX_OFED installation.
    Therefore, using "mlnx_add_kernel_support.sh" is irrelevant on Ubuntu and Debian distributions.

    Example: The following command will create a MLNX_OFED_LINUX ISO image for RedHat 7.3 under the /tmp directory.

    Copy
    Copied!
                

    # ./MLNX_OFED_LINUX-x.x-x-rhel7.3-x86_64/mlnx_add_kernel_support.sh -m /tmp/MLNX_OFED_LINUX-x.x-x-rhel7.3-x86_64/ --make-tgz Note: This program will create MLNX_OFED_LINUX TGZ for rhel7.3 under /tmp directory. All Mellanox, OEM, OFED, or Distribution IB packages will be removed. Do you want to continue?[y/N]:y See log file /tmp/mlnx_ofed_iso.21642.log   Building OFED RPMs. Please wait... Removing OFED RPMs... Created /tmp/MLNX_OFED_LINUX-x.x-x-rhel7.3-x86_64-ext.tgz

  • The script adds the following lines to /etc/security/limits.conf for the userspace components such as MPI:

    • * soft memlock unlimited

    • * hard memlock unlimited

      • These settings set the amount of memory that can be pinned by a userspace application to unlimited. If desired, tune the value unlimited to a specific amount of RAM.

For your machine to be part of the InfiniBand/VPI fabric, a Subnet Manager must be running on one of the fabric nodes. At this point, OFED for Linux has already installed the OpenSM Subnet Manager on your machine.

For the list of installation options, run: ./mlnxofedinstall --h

This section describes the installation procedure of MLNX_OFED on NVIDIA adapter cards.

  1. Log in to the installation machine as root.

  2. Mount the ISO image on your machine.

    Copy
    Copied!
                

    host1# mount -o ro,loop MLNX_OFED_LINUX-<ver>-<OS label>-<CPU arch>.iso /mnt

  3. Run the installation script.

    Copy
    Copied!
                

    /mnt/mlnxofedinstall Logs dir: /tmp/MLNX_OFED_LINUX-x.x-x.logs This program will install the MLNX_OFED_LINUX package on your machine. Note that all other Mellanox, OEM, OFED, RDMA or Distribution IB packages will be removed. Those packages are removed due to conflicts with MLNX_OFED_LINUX, do not reinstall them. Starting MLNX_OFED_LINUX-x.x.x installation ... ........ ........ Installation finished successfully. Attempting to perform Firmware update... Querying Mellanox devices firmware ...

    Warning

    For unattended installation, use the --force installation option while running the MLNX_OFED installation script:
    /mnt/mlnxofedinstall --force

    Warning

    MLNX_OFED for Ubuntu should be installed with the following flags in chroot environment:
    ./mlnxofedinstall --without-dkms --add-kernel-support --kernel <kernel version in chroot> --without-fw-update --force
    For example:
    ./mlnxofedinstall --without-dkms --add-kernel-support --kernel 3.13.0-85-generic --without-fw-update --force
    Note that the path to kernel sources (--kernel-sources) should be added if the sources are not in their default location.

    Warning

    In case your machine has the latest firmware, no firmware update will occur and the installation script will print at the end of installation a message similar to the following:
    Device #1:
    ----------
    Device Type: ConnectX4
    Part Number: MCX456A-ECA
    Description: ConnectX-4 VPI adapter card; EDR IB (100Gb/s) and 100GbE; dual-port QSFP28; PCIe3.0 x16; ROHS R6
    PSID: MT_2190110032
    PCI Device Name: 0b:00.0
    Base MAC: 0000e41d2d5cf810
    Versions: Current Available
    FW 12.14.0114 12.14.0114
    Status: Up to date

    Warning

    In case your machine has an unsupported network adapter device, no firmware update will occur and one of the error messages below will be printed. Please contact your hardware vendor for help with firmware updates.

    Error message #1:
    Device #1:
    ----------
    Device Type: ConnectX4
    Part Number: MCX456A-ECA
    Description: ConnectX-4 VPI adapter card; EDR IB (100Gb/s) and 100GbE; dual-port QSFP28; PCIe3.0 x16; ROHS R6
    PSID: MT_2190110032
    PCI Device Name: 0b:00.0
    Base MAC: 0000e41d2d5cf810
    Versions: Current Available
    FW 12.14.0114 N/A
    Status: No matching image found

    Error message #2:
    The firmware for this device is not distributed inside NVIDIA driver: 0000:01:00.0 (PSID: IBM2150110033)
    To obtain firmware for this device, please contact your HW vendor.

  4. Case A: If the installation script has performed a firmware update on your network adapter, you need to either restart the driver or reboot your system before the firmware update can take effect. Refer to the table below to find the appropriate action for your specific card.

    Action \ Adapter

    Driver Restart

    Standard Reboot (Soft Reset)

    Cold Reboot (Hard Reset)

    Standard ConnectX-4/ConnectX-4 Lx or higher

    -

    +

    -

    Adapters with Multi-Host Support

    -

    -

    +

    Socket Direct Cards

    -

    -

    +

    Case B: If the installations script has not performed a firmware upgrade on your network adapter, restart the driver by running: “/etc/init.d/openibd restart”.

  5. (InfiniBand only) Run the hca_self_test.ofed utility to verify whether or not the InfiniBand link is up. The utility also checks for and displays additional information such as:

  • HCA firmware version

  • Kernel architecture

  • Driver version

  • Number of active HCA ports along with their states

  • Node GUID
    For more details on hca_self_test.ofed, see the file docs/readme_and_user_manual/hca_self_test.readme.

After installation completion, information about the OFED installation, such as prefix, kernel version, and installation parameters can be retrieved by running the command /etc/infiniband/info. Most of the OFED components can be configured or reconfigured after the installation, by modifying the relevant configuration files. See the relevant chapters in this manual for details.
The list of the modules that will be loaded automatically upon boot can be found in the /etc/infiniband/openib.conf file.

Warning

Installing OFED will replace the RDMA stack and remove existing 3rd party RDMA connectors.

Software

  • Most of MLNX_OFED packages are installed under the “/usr” directory except for the following packages which are installed under the “/opt” directory:

    • fca and ibutils

    • iproute2 (rdma tool) - installed under /opt/Mellanox/iproute2/sbin/rdma

  • The kernel modules are installed under

    • /lib/modules/`uname -r`/updates on SLES and Fedora Distributions

    • /lib/modules/`uname -r`/extra/mlnx-ofa_kernel on RHEL and other RedHat like Distributions

    • /lib/modules/`uname -r`/updates/dkms/ on Ubuntu

Firmware

  • The firmware of existing network adapter devices will be updated if the following two conditions are fulfilled:

    • The installation script is run in default mode; that is, without the option ‘--without- fw-update’

    • The firmware version of the adapter device is older than the firmware version included with the OFED ISO image

      Note: If an adapter’s Flash was originally programmed with an Expansion ROM image, the automatic firmware update will also burn an Expansion ROM image.

  • In case your machine has an unsupported network adapter device, no firmware update will occur and the error message below will be printed.

    "The firmware for this device is not distributed inside NVIDIA driver: 0000:01:00.0 (PSID: IBM2150110033)

    To obtain firmware for this device, please contact your HW vendor."

While installing MLNX_OFED, the install log for each selected package will be saved in a separate log file.

The path to the directory containing the log files will be displayed after running the installation script in the following format:

Example:

Copy
Copied!
            

Logs dir: /tmp/MLNX_OFED_LINUX-4.4-1.0.0.0.IBMM2150110033.logs

Upon system boot, the NVIDIA drivers will be loaded automatically.

To prevent the automatic load of the NVIDIA drivers upon system boot:

Procedure_Heading_Icon-version-1-modificationdate-1704283137727-api-v2.PNG

  1. Add the following lines to the "/etc/modprobe.d/mlnx.conf" file.

    Copy
    Copied!
                

    blacklist mlx5_core blacklist mlx5_ib

  2. Set “ONBOOT=no” in the "/etc/infiniband/openib.conf" file.

  3. If the modules exist in the initramfs file, they can automatically be loaded by the kernel. To prevent this behavior, update the initramfs using the operating systems’ standard tools.Note: The process of updating the initramfs will add the blacklists from step 1, and will prevent the kernel from loading the modules automatically.

The table below lists the mlnxofedinstall script return codes and their meanings.

Return Code

Meaning

0

The Installation ended successfully

1

The installation failed

2

No firmware was found for the adapter device

22

Invalid parameter

28

Not enough free space

171

Not applicable to this system configuration. This can occur when the required hardware is not present on the system

172

Prerequisites are not met. For example, missing the required software installed or the hardware is not configured correctly

173

Failed to start the mst driver

Software

  • Most of MLNX_OFED packages are installed under the “/usr” directory except for the following packages which are installed under the “/opt” directory:

    • fca and ibutils

    • iproute2 (rdma tool) - installed under /opt/Mellanox/iproute2/sbin/rdma

  • The kernel modules are installed under

    • /lib/modules/`uname -r`/updates on SLES and Fedora Distributions

    • /lib/modules/`uname -r`/extra/mlnx-ofa_kernel on RHEL and other RedHat like Distributions

    • /lib/modules/`uname -r`/updates/dkms/ on Ubuntu

Firmware

  • The firmware of existing network adapter devices will be updated if the following two conditions are fulfilled:

    • The installation script is run in default mode; that is, without the option ‘--without- fw-update’

    • The firmware version of the adapter device is older than the firmware version included with the OFED ISO image

      Note: If an adapter’s Flash was originally programmed with an Expansion ROM image, the automatic firmware update will also burn an Expansion ROM image.

  • In case your machine has an unsupported network adapter device, no firmware update will occur and the error message below will be printed.

    "The firmware for this device is not distributed inside NVIDIA driver: 0000:01:00.0 (PSID: IBM2150110033)

    To obtain firmware for this device, please contact your HW vendor."

While installing MLNX_OFED, the install log for each selected package will be saved in a separate log file.

The path to the directory containing the log files will be displayed after running the installation script in the following format:

Example:

Copy
Copied!
            

Logs dir: /tmp/MLNX_OFED_LINUX-4.4-1.0.0.0.IBMM2150110033.logs

Upon system boot, the NVIDIA drivers will be loaded automatically.

To prevent the automatic load of the NVIDIA drivers upon system boot:

Procedure_Heading_Icon-version-1-modificationdate-1704283137727-api-v2.PNG

  1. Add the following lines to the "/etc/modprobe.d/mlnx.conf" file.

    Copy
    Copied!
                

    blacklist mlx5_core blacklist mlx5_ib

  2. Set “ONBOOT=no” in the "/etc/infiniband/openib.conf" file.

  3. If the modules exist in the initramfs file, they can automatically be loaded by the kernel. To prevent this behavior, update the initramfs using the operating systems’ standard tools.Note: The process of updating the initramfs will add the blacklists from step 1, and will prevent the kernel from loading the modules automatically.

The table below lists the mlnxofedinstall script return codes and their meanings.

NVIDIA provides OFED packages to be installed on common operating systems. These packages are provided as binaries, and NVIDIA provided full support for them. This model is now referred to as "Primary support".

Starting OFED 5.6, NVIDIA is introducing a new support model for OFED used on open source community operating systems. The goal of this new support model is to enable customers to use community-maintained variants of the Linux operating system, without being limited to major distributions that NVIDIA provides primary support for.

In the community model, there is shared responsibility between NVIDIA and customers choosing to use community operating systems in their environment. NVIDIA owns basic validation for the operating systems, so that customers know they can expect OFED to work. Customers are responsible for building their own packages and binaries (based on source code and build instructions detailed below), and can also choose to deploy parts of OFED instead of the whole package.

In case of issues, for customers that are entitled for NVIDIA support (e.g. customers who have an applicable support contract), NVIDIA will do the best effort to assist, but may require the customer to work with the community to fix issues that are deemed to be caused by the community breaking OFED, as opposed to NVIDIA owning the fix end to end.

Overall, the following should be noted when running OFED on the community-supported operating systems:

  • NVIDIA will perform sanity testing of OFED on community supported OSs

  • NVIDIA will declare which kernel versions were tested (min/max), based on mainstream kernel (kernel.org) versions

  • NVIDIA will not ship binaries/installation packages for community-supported OSs

  • Customers will use source code of OFED and build guidance and will need to build their own binaries & installation packages

  • Customers will be able to pick and choose the parts of OFED they deploy (e.g., drivers only, user tools only, and so forth)

  • In case of bug reports, customers may be asked to reproduce on a primary-supported distribution (such as RHEL) in order to have support

  • If issues are deemed specific to the community OS (e.g., if an OS deviates from mainstream in a way that breaks OFED), it is the customer’s responsibility to work with the community to fix it

Below are the instructions how to build OFED from the sources provided by NVIDIA.

Installing OFED on Community Operating Systems

  1. Download sources from https://network.nvidia.com/products/infiniband-drivers/linux/mlnx_ofed

    1. Scroll down to the and click the "Download" tab.

    2. Choose the relevant package, depending on the host operating system (the package format is what really matters (rpm/deb)).

    3. Download the desired tgz SOURCE package (e.g., MLNX_OFED_SRC-<debian?>-<ver>.tgz)

  2. Unpack the tarball.

    Copy
    Copied!
                

    tar -xzf MLNX_OFED_SRC-<debian?>-<version>.tgz

  3. Go to the extracted directory.

    Copy
    Copied!
                

    cd MLNX_OFED_SOURCE-5.6-x.x.x.x

  4. Run the installation script with the relevant options.

    Copy
    Copied!
                

    ./install.pl <option 1> <option 2> .

    Use "./install.pl --help" to see all the options and choose the desired option. For example: "./install.pl --all" should build and install all the default packages.

  5. While running install.pl, the script may fail on missing dependencies. Those dependencies should be installed manually before running install.pl again.

Proprietary Packages

The installation procedure does not install proprietary packages—propriety packages should be installed upon request.

List of closed source proprietary packages:

  • Clusterkit

  • DPCP

  • hcoll

  • Sharp

  • ibutils2

  • opensm

Today the only way to install these packages is by using an already-built rpm/deb from a similar primary operating system.

The following table maps the community OSs that are most similar to Primary OSs based on internal testing:

Community OS

Most Similar Primary OS

BCLINUX7.6

RHEL 7.9

BCLINUX7.7

RHEL 7.9

BCLINUX8.1

RHEL 8.5

Debian9.13

Debian 10.8

EulerOS2.0sp5

EulerOS2.0sp10

EulerOS2.0sp8

EulerOS2.0sp10

RHEL/CentOS7.5

RHEL 7.9

RHEL/CentOS7.5alternate

RHEL 7.9

RHEL/CentOS7.6alternate

RHEL 7.9

RHEL/CentOS7.7

RHEL 7.9

RHEL/CentOS7.8

RHEL 7.9

SLES12SP2

SLES12 SP5

SLES12SP3

SLES12 SP5

SLES12SP4

SLES12 SP5

Ubuntu16.04

Ubuntu22.04

Alma 8.5

RHEL 8.5

Anolis OS 8.4

RHEL 8.5

CentOS Strea m 8.5

RHEL 8.5

Fedora 35

RHEL 8.5

OpenEuler OS 22.03 LTS

OpenEuler20 SP3

OpenSUSE 15.3

SLES15 SP3

Photon OS 3.0

RHEL 7.9

Rocky 8.5

RHEL 8.5

Rocky 8.6

RHEL 8.6


Download and install MFT and Firmware

NVIDIA Firmware Tools (MFT) Download

Firmware Downloads

Creating Metapackages and Installing OFED on Multiple Servers (RPM-Based Systems)

By building the packages using install.pl, the RPMs will be created under /tmp/OFED-internal-5.6-x.x.x/RPMS/<OS>/<arch>/

  1. List the packages that will be installed by running the following:

    Copy
    Copied!
                

    /tmp/OFED-internal-5.6-x.x.x/install.pl--all -p

  2. Create working directories.

    Example:

    Copy
    Copied!
                

    mkdir -p /tmp/OFED_topdir/SOURCES/<rpmname>-<version> mkdir -p /tmp/OFED_topdir/SPECS mkdir -p /tmp/OFED_topdir/BUILD mkdir -p /tmp/OFED_topdir/SRPMS mkdir -p /tmp/OFED_topdir/RPMS

    For --all option it used to set rpmname as mlnx-ofed-all
    OFED will be set to the current GA version being used.

  3. Create a new XML file under /tmp/OFED_topdir/comp.xml that contains all the required packages.
    Example:

    Copy
    Copied!
                

    <?xml version="1.0" encoding="UTF-8"?> <comps> <group>   <id>all</id> <name>MLNX_OFED ALL</name> <default>true</default> <description>Mellanox OpenFabrics Enterprise Distribution for Linux: MLNX_OFED ALL packages </description> <uservisible>true</uservisible> <packagelist>   /* ------ The list below needs to be aligned with the packages listed by "install.pl --all -p" ------ */   <packagereq type="default">mlnx-tools</packagereq> <packagereq type="default">rdma-core-devel</packagereq>   <packagereq type="default">perftest</packagereq>   <packagereq type="default">Package Example 1</packagereq>   <packagereq type="default">Package Example 2</packagereq> <packagereq type="default">mlnx-ofed-all</packagereq> // This line is for the Group name </packagelist> </group> </comps>

  4. Create tarball with the correct source name:

    Copy
    Copied!
                

    echo <rpmname>-<version> > /tmp/OFED_topdir/SOURCES/<rpmname>-<version>/<rpmname>-release cd /tmp/OFED_topdir/SOURCES tar czf <rpmname>-<version>.tar.gz <rpmname>-<version>

  5. Create new spec file that requires all the packages in that directory under /tmp/OFED_topdir/SPECS/<rpmname>.spec

  6. Build the RPM metapackage from the spec file that was created before. As a result, the RPMs will be created under /tmp/OFED_topdir/RPMS/<arch>/

    Copy
    Copied!
                

    rpmbuild -ba --target noarch --define '_source_filedigest_algorithm md5' --define '_binary_filedigest_algorithm md5' --define '_topdir /tmp/OFED_topdir' --define '_sourcedir %{_topdir}/SOURCES' --define '_specdir %{_topdir}/SPECS' --define '_srcrpmdir %{_topdir}/SRPMS' --define '_rpmdir %{_topdir}/RPMS' /tmp/OFED_topdir/SPECS/<rpmname>.spec

  7. Copy the newly-created RPMs into the RPMS directory that was created before.

    Copy
    Copied!
                

    cp /tmp/OFED_topdir/RPMS/noarch/mlnx-ofed-all-5.6-.rhel8u3.noarch.rpm /tmp/OFED-internal-5.6-x.x.x/<arch>/redhat-release-8.3-1.0.el8/x86_64/

  8. Create repodata.

    Copy
    Copied!
                

    createrepo -q -g /tmp/OFED_topdir/comps.xml /tmp/OFED-internal-5.6-x.x.x/RPMS/redhat-release-8.3-1.0.el8/<arch>/

  9. Copy the generated RPMS to any server and do the following to install OFED:

    1. Create new yum repository.

      Copy
      Copied!
                  

      cat /etc/yum.repos.d/mlnx_ofed.repo [mlnx_ofed] name=mlnx_ofed baseurl=/tmp/OFED-internal-5.6-x.x.x/RPMS/OS/<arch>/ enabled=1 gpgcheck=0

    2. Refresh repository list.

      Copy
      Copied!
                  

      yum repolist

    3. Install OFED.

      Copy
      Copied!
                  

      yum install mlnx-ofed-all

Creating Metapackages and Installing OFED on Multiple Servers (Deb-Based Systems)

By building the packages using install.pl, the debs will be created under /tmp/OFED-internal-5.6-x.x.x/DEBS/<OS>/<arch>/

  1. List the packages that will be installed by the following:

    Copy
    Copied!
                

    /tmp/OFED-internal-debian-5.6-x.x.x/install.pl --all -p

  2. Create working directories.

    Example:

    Copy
    Copied!
                

    mkdir -p /tmp/OFED_topdir/<rpmname>-<version>/debian/source echo <rpmname>-<version> > /tmp/OFED_topdir/<rpmname>-<version>/<rpmname>-release

    For --all option it used to set rpmname as mlnx-ofed-all
    For OFED 5.6, the version will be set to 5.6

  3. Create rules file under /tmp/OFED_topdir/<rpmname>-<version>/debian/rules

    Copy
    Copied!
                

    #!/usr/bin/make -f # -*- makefile -*-   export DH_OPTIONS pname:=<rpmname>   %: dh $@   override_dh_auto_install: dh_installdirs -p$(pname) usr/share/doc/$(pname) install -m 0644 $(pname)-release debian/$(pname)/usr/share/doc/$(pname)

  4. Change rules file mode.

    Copy
    Copied!
                

    chmod 755 /tmp/OFED_topdir/<rpmname>-<version>/debian/rules

  5. Create rules file under /tmp/OFED_topdir/<rpmname>-<version>/debian/compat

    Copy
    Copied!
                

    echo 9 > /tmp/OFED_topdir/<rpmname>-<version>/debian/compat

  6. Create source/format file under /tmp/OFED_topdir/<rpmname>-<version>/debian/source/format

    Copy
    Copied!
                

    echo "3.0 (quilt)" > /tmp/OFED_topdir/<rpmname>-<version>/debian/source/format

  7. Create changelog file under /tmp/OFED_topdir/<rpmname>-<version>/debian/changelog

    Exmaple:

    Copy
    Copied!
                

    mlnx-ofed-all (5.6-x.x.x.x) unstable; urgency=low   * Initial release   -- your username <mail> Sun, 15 May 2022 21:00:00 +0200

  8. Create postinst script (if needed) under /tmp/OFED_topdir/<rpmname>-<version>/debian/<rpmname>.postinst

    Copy
    Copied!
                

    #!/bin/bash cd /lib/modules for dd in `/bin/ls` do /sbin/depmod $dd >/dev/null 2>&1 done   if [ -f /usr/bin/ofed_info ]; then sed -i -r -e "s/^(OFED)(.*)(-[0-9]*.*-[0-9]*.*):/MLNX_OFED_LINUX-5.6-x.x.x.x (\1\3):\n/" /usr/bin/ofed_info sed -i -r -e "s/(.*then echo) (.*):(.*)/\1 MLNX_OFED_LINUX-5.6-x.x.x.x: \3/" /usr/bin/ofed_info sed -i -r -e "s/(.*X-n\" ]; then echo) (.*)(; exit.*)/\1 5.6-x.x.x.x \3/" /usr/bin/ofed_info sed -i -e "s/OFED-internal/MLNX_OFED_LINUX/g" /usr/bin/ofed_info fi   # Switch off opensmd service /sbin/chkconfig --set opensmd off > /dev/null 2>&1 || true /sbin/chkconfig opensmd off > /dev/null 2>&1 || true if [ -f "/etc/init.d/opensmd" ] ; then if [ -e /sbin/chkconfig ]; then /sbin/chkconfig --del opensmd > /dev/null 2>&1 || true elif [ -e /usr/sbin/update-rc.d ]; then /usr/sbin/update-rc.d -f opensmd remove > /dev/null 2>&1 || true else /usr/lib/lsb/remove_initd /etc/init.d/opensmd > /dev/null 2>&1 || true fi fi   # Disable ibacm daemon by default chkconfig --del ibacm > /dev/null 2>&1 || true   # disable SDP and QIB loading by default if [ -e /etc/infiniband/openib.conf ]; then sed -i -r -e "s/^SDP_LOAD=.*/SDP_LOAD=no/" /etc/infiniband/openib.conf sed -i -r -e "s/^QIB_LOAD=.*/QIB_LOAD=no/" /etc/infiniband/openib.conf fi   /sbin/ldconfig > /dev/null 2>&1 || true

  9. Create control file under /tmp/OFED_topdir/<rpmname>-<version>/debian/control

    Copy
    Copied!
                

    Source: mlnx-ofed-all Section: utils Priority: extra Maintainer: your username <mail> Build-Depends: debhelper (>= 9.0.0) Standards-Version: 3.9.2 Homepage: http://www.mellanox.com   Package:mlnx-ofed-all // PACKAGE NAME Architecture: all   // list of the packages we need to install in this group (see the list of packages to install we created at first)   Depends: ${shlibs:Depends}, ${misc:Depends}, dpcp (>=1.1.25-1.56076), mstflint (>=4.16.0-1.56076), rdmacm-utils (>=56mlnx40-1.56076), mlnx-tools (>=5.2.0-0.56076), mlnx-iproute2 (>=5.16.0-1.56076), opensm (>=5.11.0.MLNX20220418.fd3d650-0.1.56076), ibutils2 (>=2.1.1-0.148.MLNX20220418.g60b8156.56076), ofed-scripts (>=5.6-OFED.5.6.0.7.6), dump-pr (>=1.0-5.11.0.MLNX20220418.g7e9d922.56076), mlnx-ethtool (>=5.15-1.56076), perftest (>=4.5-0.14.gd962d8c.56076), libibverbs-dev (>=56mlnx40-1.56076), ucx (>=1.13.0-1.56076), ibsim-doc (>=0.10-1.56076), srp-dkms (>=5.6-OFED.5.6.0.7.6.1), ibacm (>=56mlnx40-1.56076), sharp (>=2.7.0.MLNX20220331.8d57397a-1.56076), libibmad5 (>=56mlnx40-1.56076), mlnx-ofed-kernel-utils (>=5.6-OFED.5.6.0.7.6.1), srptools (>=56mlnx40-1.56076), ibsim (>=0.10-1.56076), libibmad-dev (>=56mlnx40-1.56076), libibumad3 (>=56mlnx40-1.56076), ibverbs-utils (>=56mlnx40-1.56076), rdma-core (>=56mlnx40-1.56076), libibverbs1 (>=56mlnx40-1.56076), isert-dkms (>=5.6-OFED.5.6.0.7.6.1), libibumad-dev (>=56mlnx40-1.56076), iser-dkms (>=5.6-OFED.5.6.0.7.6.1), ibdump (>=6.0.0-1.56076), libopensm-devel (>=5.11.0.MLNX20220418.fd3d650-0.1.56076), libopensm (>=5.11.0.MLNX20220418.fd3d650-0.1.56076), kernel-mft-dkms (>=4.20.0-29), libibnetdisc5 (>=56mlnx40-1.56076), librdmacm1 (>=56mlnx40-1.56076), opensm-doc (>=5.11.0.MLNX20220418.fd3d650-0.1.56076), mlnx-ofed-kernel-dkms (>=5.6-OFED.5.6.0.7.6.1), infiniband-diags (>=56mlnx40-1.56076), mft (>=4.15.1-9), librdmacm-dev (>=56mlnx40-1.56076), ibverbs-providers (>=56mlnx40-1.56076) Description: MLNX_OFED all installer package (with DKMS support)   Package:mlnx-ofed-all-exact Architecture: all

  10. Create copyright file under /tmp/OFED_topdir/<rpmname>-<version>/debian/copyright

    Copy
    Copied!
                

    Format: https://www.debian.org/doc/packaging-manuals/copyright-format/1.0   Files: * Copyright: 2022, NVIDIA Corporation License: GPLv2-and-2BSD * This software is available to you under a choice of one of two * licenses. You may choose to be licensed under the terms of the GNU * General Public License (GPL) Version 2, available from the file * COPYING in the main directory of this source tree, or the * BSD license below: * * Redistribution and use in source and binary forms, with or * without modification, are permitted provided that the following * conditions are met: * * - Redistributions of source code must retain the above * copyright notice, this list of conditions and the following * disclaimer. * * - Redistributions in binary form must reproduce the above * copyright notice, this list of conditions and the following * disclaimer in the documentation and/or other materials * provided with the distribution. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE.

    On Debian systems, a copy of the General Public License version 2 could be found under /usr/share/common-licenses/GPL-2

  11. Creating tarball.

    Copy
    Copied!
                

    cd /tmp/OFED_topdir tar czf <rpmname>_<version>.orig.tar.gz <rpmname>-<version> cd <rpmname>-<version> dpkg-buildpackage -us -uc cp -af *.deb /tmp/OFED-internal-5.6-x.x.x/DEBS/OS/arch/

  12. Create new yum repository under /etc/yum.repos.d/mlnx_ofed.repo

    Copy
    Copied!
                

    [mlnx_ofed] deb [trusted=yes] file:/tmp/OFED-internal-5.6-0.7.6/DEBS/debian10.8/x86_64/ ./

  13. Refresh repository list.

    Copy
    Copied!
                

    apt update

  14. Install OFED.

    Copy
    Copied!
                

    apt install mlnx-ofed-all

Warning

mpitests package is disabled on Fedora 35 and Photon due to building issues.mpitests package is disabled on Fedora 35 and Photon due to building issues.


Installing MLNX_OFED Using YUM

This type of installation is applicable to RedHat/OL and Fedora operating systems.

Setting up MLNX_OFED YUM Repository

  1. Log into the installation machine as root.

  2. Mount the ISO image on your machine and copy its content to a shared location in your network.

    Copy
    Copied!
                

    # mount -o ro,loop MLNX_OFED_LINUX-<ver>-<OS label>-<CPU arch>.iso /mnt

  3. Download and install NVIDIA's GPG-KEY:
    The key can be downloaded via the following link:
    http://www.mellanox.com/downloads/ofed/RPM-GPG-KEY-Mellanox

    Copy
    Copied!
                

    # wget http://www.mellanox.com/downloads/ofed/RPM-GPG-KEY-Mellanox --2018-01-25 13:52:30-- http://www.mellanox.com/downloads/ofed/RPM-GPG-KEY-Mellanox Resolving www.mellanox.com... 72.3.194.0 Connecting to www.mellanox.com|72.3.194.0|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1354 (1.3K) [text/plain] Saving to: ?RPM-GPG-KEY-Mellanox?   100%[=================================================>] 1,354 --.-K/s in 0s   2018-01-25 13:52:30 (247 MB/s) - ?RPM-GPG-KEY-Mellanox? saved [1354/1354]

  4. Install the key.

    Copy
    Copied!
                

    # sudo rpm --import RPM-GPG-KEY-Mellanox warning: rpmts_HdrFromFdno: Header V3 DSA/SHA1 Signature, key ID 6224c050: NOKEY Retrieving key from file:///repos/MLNX_OFED/<MLNX_OFED file>/RPM-GPG-KEY-Mellanox Importing GPG key 0x6224C050: Userid: "Mellanox Technologies (Mellanox Technologies - Signing Key v2) <support@mellanox.com>" From : /repos/MLNX_OFED/<MLNX_OFED file>/RPM-GPG-KEY-Mellanox Is this ok [y/N]:

  5. Check that the key was successfully imported.

    Copy
    Copied!
                

    # rpm -q gpg-pubkey --qf '%{NAME}-%{VERSION}-%{RELEASE}\t%{SUMMARY}\n' | grep Mellanox gpg-pubkey-a9e4b643-520791ba gpg(Mellanox Technologies <support@mellanox.com>)

  6. Create a yum repository configuration file called "/etc/yum.repos.d/mlnx_ofed.repo" with the following content:

    Copy
    Copied!
                

    [mlnx_ofed] name=MLNX_OFED Repository baseurl=file:///<path to extracted MLNX_OFED package>/RPMS enabled=1 gpgkey=file:///<path to the downloaded key RPM-GPG-KEY-Mellanox> gpgcheck=1

  7. Check that the repository was successfully added.

    Copy
    Copied!
                

    # yum repolist Loaded plugins: product-id, security, subscription-manager This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register. repo id repo name status mlnx_ofed MLNX_OFED Repository 108 rpmforge RHEL 6Server - RPMforge.net - dag 4,597   repolist: 8,351

Setting up MLNX_OFED YUM Repository Using --add-kernel-support

  1. Log into the installation machine as root.

  2. Mount the ISO image on your machine and copy its content to a shared location in your network.

    Copy
    Copied!
                

    # mount -o ro,loop MLNX_OFED_LINUX-<ver>-<OS label>-<CPU arch>.iso /mnt

  3. Build the packages with kernel support and create the tarball.

    Copy
    Copied!
                

    # /mnt/mlnx_add_kernel_support.sh --make-tgz <optional --kmp> -k $(uname -r) -m /mnt/ Note: This program will create MLNX_OFED_LINUX TGZ for rhel7.6 under /tmp directory. Do you want to continue?[y/N]:y See log file /tmp/mlnx_iso.4120_logs/mlnx_ofed_iso.4120.log   Checking if all needed packages are installed... Building MLNX_OFED_LINUX RPMS . Please wait... Creating metadata-rpms for 3.10.0-957.21.3.el7.x86_64 ... WARNING: If you are going to configure this package as a repository, then please note WARNING: that it contains unsigned rpms, therefore, you need to disable the gpgcheck WARNING: by setting 'gpgcheck=0' in the repository conf file. Created /tmp/MLNX_OFED_LINUX-5.2-0.5.5.0-rhel7.6-x86_64-ext.tgz

  4. Open the tarball.

    Copy
    Copied!
                

    # cd /tmp/ # tar -xvf /tmp/MLNX_OFED_LINUX-5.2-0.5.5.0-rhel7.6-x86_64-ext.tgz

  5. Create a YUM repository configuration file called "/etc/yum.repos.d/mlnx_ofed.repo" with the following content:

    Copy
    Copied!
                

    [mlnx_ofed] name=MLNX_OFED Repository baseurl=file:///<path to extracted MLNX_OFED package>/RPMS enabled=1 gpgcheck=0

  6. Check that the repository was successfully added.

    Copy
    Copied!
                

    # yum repolist Loaded plugins: product-id, security, subscription-manager This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register. repo id repo name status mlnx_ofed MLNX_OFED Repository 108 rpmforge RHEL 6Server - RPMforge.net - dag 4,597   repolist: 8,351

Installing MLNX_OFED Using the YUM Tool

After setting up the YUM repository for MLNX_OFED package, perform the following:

  1. View the available package groups by invoking:

    Copy
    Copied!
                

    # yum search mlnx-ofed- mlnx-ofed-all.noarch : MLNX_OFED all installer package (with KMP support) mlnx-ofed-all-user-only.noarch : MLNX_OFED all-user-only installer package (User Space packages only) mlnx-ofed-basic.noarch : MLNX_OFED basic installer package (with KMP support) mlnx-ofed-basic-user-only.noarch : MLNX_OFED basic-user-only installer package (User Space packages only) mlnx-ofed-bluefield.noarch : MLNX_OFED bluefield installer package (with KMP support) mlnx-ofed-bluefield-user-only.noarch : MLNX_OFED bluefield-user-only installer package (User Space packages only) mlnx-ofed-dpdk.noarch : MLNX_OFED dpdk installer package (with KMP support) mlnx-ofed-dpdk-upstream-libs.noarch : MLNX_OFED dpdk-upstream-libs installer package (with KMP support) mlnx-ofed-dpdk-upstream-libs-user-only.noarch : MLNX_OFED dpdk-upstream-libs-user-only installer package (User Space packages only) mlnx-ofed-dpdk-user-only.noarch : MLNX_OFED dpdk-user-only installer package (User Space packages only) mlnx-ofed-eth-only-user-only.noarch : MLNX_OFED eth-only-user-only installer package (User Space packages only) mlnx-ofed-guest.noarch : MLNX_OFED guest installer package (with KMP support) mlnx-ofed-guest-user-only.noarch : MLNX_OFED guest-user-only installer package (User Space packages only) mlnx-ofed-hpc.noarch : MLNX_OFED hpc installer package (with KMP support) mlnx-ofed-hpc-user-only.noarch : MLNX_OFED hpc-user-only installer package (User Space packages only) mlnx-ofed-hypervisor.noarch : MLNX_OFED hypervisor installer package (with KMP support) mlnx-ofed-hypervisor-user-only.noarch : MLNX_OFED hypervisor-user-only installer package (User Space packages only) mlnx-ofed-kernel-only.noarch : MLNX_OFED kernel-only installer package (with KMP support) mlnx-ofed-vma.noarch : MLNX_OFED vma installer package (with KMP support) mlnx-ofed-vma-eth.noarch : MLNX_OFED vma-eth installer package (with KMP support) mlnx-ofed-vma-eth-user-only.noarch : MLNX_OFED vma-eth-user-only installer package (User Space packages only) mlnx-ofed-vma-user-only.noarch : MLNX_OFED vma-user-only installer package (User Space packages only) mlnx-ofed-vma-vpi.noarch : MLNX_OFED vma-vpi installer package (with KMP support) mlnx-ofed-vma-vpi-user-only.noarch : MLNX_OFED vma-vpi-user-only installer package (User Space packages only

    where:

    mlnx-ofed-all

    Installs all available packages in MLNX_OFED

    mlnx-ofed-basic

    Installs basic packages required for running NVIDIA cards

    mlnx-ofed-guest

    Installs packages required by guest OS

    mlnx-ofed-hpc

    Installs packages required for HPC

    mlnx-ofed-hypervisor

    Installs packages required by hypervisor OS

    mlnx-ofed-vma

    Installs packages required by VMA

    mlnx-ofed-vma-eth

    Installs packages required by VMA to work over Ethernet

    mlnx-ofed-vma-vpi

    Installs packages required by VMA to support VPI

    bluefield

    Installs packages required for BlueField

    dpdk

    Installs packages required for DPDK

    dpdk-upstream-libs

    Installs packages required for DPDK using RDMA-Core

    kernel-only

    Installs packages required for a non-default kernel

    Note: MLNX_OFED provides kernel module RPM packages with KMP support for RHEL and SLES. For other operating systems, kernel module RPM packages are provided only for the operating system's default kernel. In this case, the group RPM packages have the supported kernel version in their package's name.

    Example:

    Copy
    Copied!
                

    mlnx-ofed-all-3.17.4-301.fc21.x86_64.noarch : MLNX_OFED all installer package for kernel 3.17.4-301.fc21.x86_64 (without KMP support) mlnx-ofed-basic-3.17.4-301.fc21.x86_64.noarch : MLNX_OFED basic installer package for kernel 3.17.4-301.fc21.x86_64 (without KMP support) mlnx-ofed-guest-3.17.4-301.fc21.x86_64.noarch : MLNX_OFED guest installer package for kernel 3.17.4-301.fc21.x86_64 (without KMP support) mlnx-ofed-hpc-3.17.4-301.fc21.x86_64.noarch : MLNX_OFED hpc installer package for kernel 3.17.4-301.fc21.x86_64 (without KMP support) mlnx-ofed-hypervisor-3.17.4-301.fc21.x86_64.noarch : MLNX_OFED hypervisor installer package for kernel 3.17.4-301.fc21.x86_64 (without KMP support) mlnx-ofed-vma-3.17.4-301.fc21.x86_64.noarch : MLNX_OFED vma installer package for kernel 3.17.4-301.fc21.x86_64 (without KMP support) mlnx-ofed-vma-eth-3.17.4-301.fc21.x86_64.noarch : MLNX_OFED vma-eth installer package for kernel 3.17.4-301.fc21.x86_64 (without KMP support) mlnx-ofed-vma-vpi-3.17.4-301.fc21.x86_64.noarch : MLNX_OFED vma-vpi installer package for kernel 3.17.4-301.fc21.x86_64 (without KMP support) mlnx-ofed-hypervisor-3.17.4-301.fc21.x86_64.noarch : MLNX_OFED hypervisor installer package for kernel 3.17.4-301.fc21.x86_64 (without KMP support) mlnx-ofed-vma-3.17.4-301.fc21.x86_64.noarch : MLNX_OFED vma installer package for kernel 3.17.4-301.fc21.x86_64 (without KMP support) mlnx-ofed-vma-eth-3.17.4-301.fc21.x86_64.noarch : MLNX_OFED vma-eth installer package for kernel 3.17.4-301.fc21.x86_64 (without KMP support) mlnx-ofed-vma-vpi-3.17.4-301.fc21.x86_64.noarch : MLNX_OFED vma-vpi installer package for kernel 3.17.4-301.fc21.x86_64 (without KMP support)

    When using an operating system different than RHEL or SLES, or you have installed a kernel that is not supported by default in MLNX_OFED, you can use the mlnx_add_kernel_support.sh script to build MLNX_OFED for your kernel.
    The script will automatically build the matching group RPM packages for your kernel so that you can still install MLNX_OFED via yum.
    Please note that the resulting MLNX_OFED repository will contain unsigned RPMs, therefore, you should set 'gpgcheck=0' in the repository configuration file.

  2. Install the desired group.

    Copy
    Copied!
                

    # yum install mlnx-ofed-all Loaded plugins: langpacks, product-id, subscription-manager Resolving Dependencies --> Running transaction check ---> Package mlnx-ofed-all.noarch 0:3.1-0.1.2 will be installed --> Processing Dependency: kmod-isert = 1.0-OFED.3.1.0.1.2.1.g832a737.rhel7u1 for package: mlnx-ofed-all-3.1-0.1.2.noarch .................. .................. qperf.x86_64 0:0.4.9-9  rds-devel.x86_64 0:2.0.7-1.12 rds-tools.x86_64 0:2.0.7-1.12 sdpnetstat.x86_64 0:1.60-26 srptools.x86_64 0:1.0.2-12   Complete!

Warning

Installing MLNX_OFED using the “YUM” tool does not automatically update the firmware.
To update the firmware to the version included in MLNX_OFED package, run:
# yum install mlnx-fw-updater
OR:
Update the firmware to the latest version available on NVIDIA's website as described in “Updating Firmware After Installation” section.

Installing MLNX_OFED Using apt-get

This type of installation is applicable to Debian and Ubuntu operating systems.

Setting up MLNX_OFED apt-get Repository

  1. Log into the installation machine as root.

  2. Extract the MLNX_OFED package on a shared location in your network.
    It can be downloaded from https://www.nvidia.com/en-us/networking/ → Products → Software→ InfiniBand Drivers.

  3. Create an apt-get repository configuration file called "/etc/apt/sources.list.d/mlnx_ofed.list" with the following content:

    Copy
    Copied!
                

    deb file:/<path to extracted MLNX_OFED package>/DEBS ./

  4. Download and install NVIDIA's Technologies GPG-KEY.

    Copy
    Copied!
                

    # wget -qO - http://www.mellanox.com/downloads/ofed/RPM-GPG-KEY-Mellanox | sudo apt-key add -

  5. Verify that the key was successfully imported.

    Copy
    Copied!
                

    # apt-key list pub 1024D/A9E4B643 2013-08-11 uid Mellanox Technologies <support@mellanox.com> sub 1024g/09FCC269 2013-08-11

  6. Update the apt-get cache.

    Copy
    Copied!
                

    # sudo apt-get update

Setting up MLNX_OFED apt-get Repository Using --add-kernel-support

  1. Log into the installation machine as root.

  2. Mount the ISO image on your machine and copy its content to a shared location in your network.

    Copy
    Copied!
                

    # mount -o ro,loop MLNX_OFED_LINUX-<ver>-<OS label>-<CPU arch>.iso /mnt

  3. Build the packages with kernel support and create the tarball.

    Copy
    Copied!
                

    # /mnt/mlnx_add_kernel_support.sh --make-tgz <optional --kmp> -k $(uname -r) -m /mnt/ Note: This program will create MLNX_OFED_LINUX TGZ for rhel7.6 under /tmp directory. Do you want to continue?[y/N]:y See log file /tmp/mlnx_iso.4120_logs/mlnx_ofed_iso.4120.log   Checking if all needed packages are installed... Building MLNX_OFED_LINUX RPMS . Please wait... Creating metadata-rpms for 3.10.0-957.21.3.el7.x86_64 ... WARNING: If you are going to configure this package as a repository, then please note WARNING: that it contains unsigned rpms, therefore, you need to disable the gpgcheck WARNING: by setting 'gpgcheck=0' in the repository conf file. Created /tmp/MLNX_OFED_LINUX-5.2-0.5.5.0-rhel7.6-x86_64-ext.tgz

  4. Open the tarball.

    Copy
    Copied!
                

    # cd /tmp/ # tar -xvf /tmp/MLNX_OFED_LINUX-5.2-0.5.5.0-rhel7.6-x86_64-ext.tgz

  5. Create an apt-get repository configuration file called "/etc/apt/sources.list.d/mlnx_ofed.list" with the following content:

    Copy
    Copied!
                

    deb [trusted=yes] file:/<path to extracted MLNX_OFED package>/DEBS ./

  6. Update the apt-get cache.

    Copy
    Copied!
                

    # sudo apt-get update

Installing MLNX_OFED Using the apt-get Tool

After setting up the apt-get repository for MLNX_OFED package, perform the following:

  1. View the available package groups by invoking:

    Copy
    Copied!
                

    # apt-cache search mlnx-ofed- apt-cache search mlnx-ofed ........ knem-dkms - DKMS support for mlnx-ofed kernel modules mlnx-ofed-kernel-dkms - DKMS support for mlnx-ofed kernel modules mlnx-ofed-kernel-utils - Userspace tools to restart and tune mlnx-ofed kernel modules mlnx-ofed-vma-vpi - MLNX_OFED vma-vpi installer package (with DKMS support) mlnx-ofed-kernel-only - MLNX_OFED kernel-only installer package (with DKMS support) mlnx-ofed-bluefield - MLNX_OFED bluefield installer package (with DKMS support) mlnx-ofed-hpc-user-only - MLNX_OFED hpc-user-only installer package (User Space packages only) mlnx-ofed-dpdk-user-only - MLNX_OFED dpdk-user-only installer package (User Space packages only) mlnx-ofed-all-exact - MLNX_OFED all installer package (with DKMS support) (exact) mlnx-ofed-all - MLNX_OFED all installer package (with DKMS support) mlnx-ofed-vma-vpi-user-only - MLNX_OFED vma-vpi-user-only installer package (User Space packages only) mlnx-ofed-eth-only-user-only - MLNX_OFED eth-only-user-only installer package (User Space packages only) mlnx-ofed-vma-user-only - MLNX_OFED vma-user-only installer package (User Space packages only) mlnx-ofed-hpc - MLNX_OFED hpc installer package (with DKMS support) mlnx-ofed-bluefield-user-only - MLNX_OFED bluefield-user-only installer package (User Space packages only) mlnx-ofed-dpdk - MLNX_OFED dpdk installer package (with DKMS support) mlnx-ofed-vma-eth-user-only - MLNX_OFED vma-eth-user-only installer package (User Space packages only) mlnx-ofed-all-user-only - MLNX_OFED all-user-only installer package (User Space packages only) mlnx-ofed-vma-eth - MLNX_OFED vma-eth installer package (with DKMS support) mlnx-ofed-vma - MLNX_OFED vma installer package (with DKMS support) mlnx-ofed-dpdk-upstream-libs-user-only - MLNX_OFED dpdk-upstream-libs-user-only installer package (User Space packages only) mlnx-ofed-basic-user-only - MLNX_OFED basic-user-only installer package (User Space packages only) mlnx-ofed-basic-exact - MLNX_OFED basic installer package (with DKMS support) (exact) mlnx-ofed-basic - MLNX_OFED basic installer package (with DKMS support) mlnx-ofed-dpdk-upstream-libs - MLNX_OFED dpdk-upstream-libs installer package (with DKMS support)

    where:

    mlnx-ofed-all

    MLNX_OFED all installer package

    mlnx-ofed-basic

    MLNX_OFED basic installer package

    mlnx-ofed-vma

    MLNX_OFED vma installer package

    mlnx-ofed-hpc

    MLNX_OFED HPC installer package

    mlnx-ofed-vma-eth

    MLNX_OFED vma-eth installer package

    mlnx-ofed-vma-vpi

    MLNX_OFED vma-vpi installer package

    knem-dkms

    MLNX_OFED DKMS support for mlnx-ofed kernel modules

    kernel-dkms

    MLNX_OFED kernel-dkms installer package

    kernel-only

    MLNX_OFED kernel-only installer package

    bluefield

    MLNX_OFED bluefield installer package

    mlnx-ofed-all-exact

    MLNX_OFED mlnx-ofed-all-exact installer package

    dpdk

    MLNX_OFED dpdk installer package

    mlnx-ofed-basic-exact

    MLNX_OFED mlnx-ofed-basic-exact installer package

    dpdk-upstream-libs

    MLNX_OFED dpdk-upstream-libs installer package

  2. Install the desired group.

    Copy
    Copied!
                

    apt-get install '<group name>'

    Example:

    Copy
    Copied!
                

    apt-get install mlnx-ofed-all

    Warning

    Installing MLNX_OFED using the “apt-get” tool does not automatically update the firmware.
    To update the firmware to the version included in MLNX_OFED package, run:
    # apt-get install mlnx-fw-updater
    OR:
    Update the firmware to the latest version available on NVIDIA's website as described in “Updating Firmware After Installation” section.

As of MLNX_OFED v4.5, NEO-Host users can opt to install the NEO-Host package embedded in MLNX_OFED package.

In order to install NEO-Host, add the --with-neohost-backend flag to the mlnxofedinstall script run.

Example:

Copy
Copied!
            

# /mnt/mlnxofedinstall --with-neohost-backend

© Copyright 2023, NVIDIA. Last updated on Jan 4, 2024.