Document Revision History

NVIDIA MLNX-GW User Manual for NVIDIA Skyway Appliance v8.2.2200

Rev 7.2-3.10.41xx, November 2022

Rev 7.1-3.10.40xx, October 2022

Added:

Removed:

  • The command "ip l3" command

  • Puppet Agent section

Rev 7.1-3.10.31xx, August 2022

Updated:

Rev 7.0-3.10.30xx, July 2022

Added:

Rev 7.0-3.10.22xx, May 2022

There are no changes to this version of the user manual. For further information on bug fixes and improvements, see the release notes of this software version.

Rev 7.0-3.10.21xx, April 2022

There are no changes to this version of the user manual. For further information on bug fixes and improvements, see the release notes of this software version.

Rev 6.9-3.10.20xx,March 2022

Added:

Updated:

Rev 6.9-3.10.12xx, January 2022

There are no changes to this version of the user manual. For further information on bug fixes and improvements, see the release notes of this software version.

Rev 6.9-3.10.11xx, December 2021

Updated:

Rev 6.8-3.10.10xx, November/December 2021

Added:

Removed:

  • The section "Fabric Inspector"

  • The command "fabric zero-counters"

  • The command "show fabric"

Updated:

Rev 6.7-3.9.33xx, August 2021

Updated:

Added:

Updated:

Rev 6.6-3.9.24xx, March 2021

Added:

Rev 6.6-3.9.23xx, February 2021

Rev 6.6-3.9.21xx, January 2021

There are no changes to this version. The software version was changed due to bug fixes and improvements. For further information, see Release Notes.

Rev 6.5-3.9.20xx, November 2020

Updated:

Rev 6.5-3.9.19xx, October 2020

There are no changes to this version. The software version was changed due to bug fixes and improvements. For further information, see Release Notes.

Rev 6.5-3.9.16xx, September 2020

Added:

Rev 6.5-3.9.13xx, August 2020

Updated:

Rev 6.4-3.9.10xx, July 2020

Added:

Updated:

Rev 6.4-3.9.0900, May/June 2020

Added:

Updated:

Rev 6.4-3.9.0600, April 2020


There are no changes to this version. The software version was changed due to bug fixes and improvements. For further information, see Release Notes.

Rev 6.4-3.9.0450, March 2020

Added:

Updated:

Rev 6.3-3.9.0300, February 2020
Added:

Updated:

Removed:


Rev 6.3 December 2019
No changes to this version. The software version was changed due to bug fixes and improvements in cables and speeds. For further information, see Release Notes.

Rev 6.3 November 2019

Added:

  • "all-cas," "all-routers," all-switches," and "all-vcas" parameters to the "ib partition member" command

Updated:

Removed:

  • "prefix-modes show-config" option because it is no longer available in the "cli session" command

  • Terminal type vt320 from the "cli session" command

  • "dcb ets enable" command is deprecated

Rev 6.2 September 2019

Added:

Updated:

Removed

  • The XML API is deprecated as of release 3.8.2000.

  • xml-gw enable" due to XML API depreciation

  • The command "show xml-gw" due to XML API depreciation

Rev 6.1 August 2019

No changes to this version. The software version was changed due to bug fixes. For further information, see Release Notes.

Rev 6.0 June 2019

Added:

Updated:

Rev 5.9 June 2019

No changes to this version. The software version was changed due to bug fixes. For further information, see Release Notes.

Rev 5.9 May 2019

Added:

  • Note on port splitting on externally managed switches under section "Break-out Cables"

Updated:

Rev 5.8 April 2019

Added:

Updated:

Rev 5.7 December 2018

Added:

  • The command “show stats sample data”

Updated:

Rev 5.6 December 2018No changes made since last revision.Rev 5.5 December 2018

Added:

  • The command “email autosupport mailhub”

  • The command “email autosupport recipient”

  • The command “show email”

  • The command “snmp-server cache enable”

  • Section “Break-Out Cables”

Updated:

  • Section “IB SM Mgmt”

  • Section “Supported Events”

  • The command “aaa authorization”

  • The command “show aaa”

  • Section “System File Encryption”

  • The command “show memory”

  • Section “Configuring an SNMPv3 User”

  • The command “snmp-server user”

  • The command “show snmp auto-refresh”

  • The command “show puppet-agent”

  • Section “Configuring IB Router”

  • The command “ib sm m-key”

  • The command “show ib sm m-key”

Rev 5.4 November 2018

No changes made since last revision

Rev 5.3 August 2018

Added:

  • The command “web proxy auth authtype”

  • The command “web proxy auth basic”

  • The command “web proxy auth host”

Updated:

  • The command “{ip | ipv6} route”

  • The command “image install”

  • The command “image options”

  • Section “Authentication, Authorization and Accounting (AAA)”

  • The command “aaa authorization”

  • The command “show virtual-machine install”

  • The command “show telemetry”

  • The command “show telemetry threshold record”

  • The command “show system profile”

  • The command “show ib fabric messages”


© Copyright 2023, NVIDIA. Last updated on May 23, 2023.