Chassis Management Commands
clear counters
clear counters [all | interface <type> <number>] Clears switch counters. |
||
Syntax Description |
all |
Clears all switch counters. |
type |
A specific interface type. |
|
number |
The interface number. |
|
Default |
N/A |
|
Configuration Mode |
config |
|
History |
3.2.3000 3.6.4000: Added note |
|
Example |
switch (config) # clear counters |
|
Related Commands |
||
Notes |
The command also clears storm-control counters |
health
health {max-report-len <length> | re-notif-cntr <counter> | report-clear} Configures health daemon settings. |
||
Syntax Description |
max-report-len <length> |
Sets the length of the health report ( number of line entries) Range: 10-2048 |
re-notif-cntr <counter> |
Health control changes notification counter in seconds Range: 120-7200 |
|
report-clear |
Clears the health report |
|
Default |
max-report-len: 50 re-notif-cntr: |
|
Configuration Mode |
config |
|
History |
3.1.0000 |
|
Example |
switch (config) # health re-notif-cntr 125 |
|
Related Commands |
show health-report |
|
Notes |
led uid
led <module> uid <on | off> Configures the UID LED. |
||
Syntax Description |
module |
Specifies the module whose UID LED to configure |
on |
Turns on UID LED |
|
off |
Turns off UID LED |
|
Default |
N/A |
|
Configuration Mode |
config |
|
History |
3.6.1002 3.6.2002: Added modular switch support |
|
Example |
switch (config) # led MGMT uid on |
|
Related Commands |
||
Notes |
|
power enable
power enable <module name> no power enable <module name> Powers on the module. The no form of the command shuts down the module. |
||
Syntax Description |
module name |
Enables power for selected module |
Default |
Power is enabled on all modules |
|
Configuration Mode |
config |
|
History |
3.1.0000 |
|
Example |
switch (config) # power enable L01 |
|
Related Commands |
show power show power consumers |
|
Notes |
|
system manage inband-ib
system manage inband-ib no system manage inband-ib Enables remote inband management of the system. The no form of the command disables remote inband management of the system. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
config |
|
History |
3.8.1000 |
|
Example |
switch (config) # system manage inband-ib |
|
Related Commands |
show system manage inband-ib |
|
Notes |
This command is available only on Quantum based switch systems |
power redundancy-mode
power redundancy-mode [combined | grid-redundant | ps-redundant] no power redundancy-mode Controls the power supply redundancy mode. The no form of the command resets power redundancy mode to the default value. |
||
Syntax Description |
combined |
No redundancy – no alarm threshold |
grid-redundant |
N+N – the alarm threshold will be set to a level, indicating when the power availability falls below power that can support N+N scheme |
|
ps-redundant |
N+1 – the alarm threshold will be set to a level, indicating when the power availability falls below power that can support N+1 scheme |
|
Default |
N/A |
|
Configuration Mode |
config |
|
History |
3.2.0000 3.10.1000: Added the no form of the command |
|
Example |
switch (config) # power redundancy-mode combined |
|
Related Commands |
||
Notes |
|
system profile
system profile {ib-single-switch | ib-no-adaptive-routing-single-switch | ib [split-ready] [num-of-swids <swid-num>] [no-adaptive-routing] [ib-router] [adaptive-routing-groups <value>]} [force] Sets the profile of the system to InfiniBand with various parameters |
||
Syntax Description |
ib-single-switch |
Enables InfiniBand switch profile All network interfaces link protocol set to InfiniBand |
ib-no-adaptive-routing-single-switch |
Enables InfiniBand switch profile without adaptive routing capabilities All network interfaces link protocol set to InfiniBand with disabled adaptive routing |
|
split-ready |
Enables the system to reboot in split enable mode with capability to configure 2x the number of ports exposed to IB utilities. Note: This parameter is available only on Quantum-based systems. |
|
ib-router |
Enables IB Routing capability on the system |
|
num-of-swids |
Multiple switch IDs are configurable
Note: If num-of-swids is not defined then it is set to 1 by default. |
|
no-adaptive-routing |
Disables adaptive routing |
|
adaptive-routing-groups |
Sets adaptive routing groups. Warning
Allowed only when adaptive routing is enabled.
|
|
Default |
The default system profile depends on the system. |
|
Configuration Mode |
config |
|
History |
3.1.0000 3.2.1100: Added “vpi-single-switch” option 3.3.4100: Added SX6036G3.3.4302Added system profile ib-no-adaptive-routing-single-switch 3.6.1002: Added system profile “ib num-of-swids” 3.6.6162: Added system profile “num of adaptive routing” 3.7.0020: Added system profile “ib split-ready” for 1U systems 3.8.1100: Updated syntax description for the parameter "adaptive-routing-groups" 3.9.0300: Added system profile “ib split-ready” for modular systems 3.9.2000: Updated note 3.10.6000: Updated note 3.11.2006: Updated notes |
|
Example |
switch (config) # system profile ib-single-switch |
|
Related Commands |
port type show system profile show ports type |
|
Notes |
|
usb eject
usb eject Turns off the USB interface gracefully. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
config |
|
History |
3.1.0000 |
|
Example |
switch (config) # usb eject |
|
Related Commands |
||
Notes |
Applicable only for systems with USB interface. |
show asic-version
show asic-version Displays firmware ASIC version. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.1.0000 3.4.2008: Updated example |
|
Example |
switch (config) # show asic-version |
|
Related Commands |
||
Notes |
show bios
show bios Displays the BIOS version information. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.3.4150 |
|
Example |
switch (config) # show bios |
|
Related Commands |
||
Notes |
show cpld
show cpld Displays status of all CPLDs in the system. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.1.0000 3.3.4302: Updated example 3.10.1000: Updated example to reflect the part number (PN) field 3.10.1100: Updated example to reflect Version Minor |
|
Example |
switch (config) # show cpld ---------------------------------------------------------------------------- |
|
Related Commands |
||
Notes |
show fan
show fan Displays fans status. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.1.0000 |
|
Example |
switch (config) # show fan |
|
Related Commands |
||
Notes |
show health-report
show health-report Displays health report. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.1.0000 3.3.0000: Output update 3.11.2002: Output update |
|
Example |
switch (config) # show health-report |
|
Related Commands |
health |
|
Notes |
show inventory
show inventory Displays system inventory. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.1.0000 3.4.1604: Removed CPU module output from example 3.5.1000: Removed Type column from example 3.6.1002: Updated example |
|
Example |
||
switch (config) # show inventory |
||
Related Commands |
||
Notes |
show leds
show leds [<module>] Displays the LED status of the switch system. |
||
Syntax Description |
module |
Specifies the module whose LED status to display |
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.6.1002 3.6.2002: Updated example |
|
Example |
switch (config) # show leds |
|
Related Commands |
||
Notes |
show memory
show memory Displays memory status. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.1.0000 3.7.1000: Updated example |
|
Example |
||
switch (config) # show memory ----------------------------------------------------------------------- |
||
Related Commands |
||
Notes |
show module
show module Displays modules status. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.1.0000 3.3.0000: Added “Is Fatal” column 3.4.2008: Updated command output 3.4.3000: Updated command output and added note |
|
Example |
switch (config) # show module |
|
Related Commands |
||
Notes |
The Status column may have one of the following values: error, fatal, not-present, powered-off, powered-on, ready. |
show power
show power Displays power supplies and power usage. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.1.0000 3.5.1000: Updated example |
|
Example |
||
switch (config) # show power ---------------------------------------------------------------------------------- |
||
Related Commands |
||
Notes |
show power consumers
show power consumers Displays power consumption information. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.1.0000 3.5.1000: Updated example |
|
Example |
||
switch (config) # show power consumers ------------------------------------------------------------------------- |
||
Related Commands |
||
Notes |
show protocols
show protocols Displays all protocols enabled in the system. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.2.3000 3.3.4550: Updated example 3.6.1002: Updated example |
|
Example |
switch (config) # show protocols |
|
Related Commands |
||
Notes |
show resources
show resources Displays system resources. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.1.0000 |
|
Example |
switch (config) # show resources |
|
Related Commands |
||
Notes |
show system capabilities
show system capabilities Displays system capabilities. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.1.0000 3.3.0000: Added gateway support 3.6.1002: Updated example 3.7.0000: Updated example |
|
Example |
switch (config) # show system capabilities |
|
Related Commands |
show system profile |
|
Notes |
show system manage inband-ib
show system manage inband-ib Displays whether inband management over InfiniBand is currently allowed. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.8.1000 |
|
Example |
switch (config) # show system manage inband-ib |
|
Related Commands |
system manage inband-ib |
|
Notes |
This command is available only on Quantum based switch systems |
show system profile
show system profile Displays system profile. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.2.0000 3.7.0000: Updated example |
|
Example |
switch (config) # show system profile |
|
Related Commands |
system profile |
|
Notes |
show system type
show system type Displays system type. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.5.1000 |
|
Example |
switch (config) # show system type |
|
Related Commands |
||
Notes |
show temperature
show temperature Displays system temperature sensors status. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.1.0000 |
|
Example |
switch (config) # show temperature |
|
Related Commands |
||
Notes |
show version
show version Displays version information for the currently running system image. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.1.0000 |
|
Example |
switch (config) # show version Product name: MLNX-OS |
|
Related Commands |
||
Notes |
show version concise
show version concise Displays concise version information for the currently running system image. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.1.0000 |
|
Example |
switch (config) # show version concise |
|
Related Commands |
||
Notes |
show voltage
show voltage Displays voltage level measurements on different sensors. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
Any command mode |
|
History |
3.1.0000 3.3.5006: Updated example |
|
Example |
||
switch (config) # show voltage ============================================================================================ |
||
Related Commands |
||
Notes |
chassis ha bip
chassis ha bip <board-ip-address> Configures Chassis Board IP (BIP). |
||
Syntax Description |
board-ip-address |
Sets the chassis virtual IP address |
Default |
0.0.0.0 |
|
Configuration Mode |
config |
|
History |
3.1.0000 |
|
Example |
switch (config) # chassis ha bip 192.168.10.100 |
|
Related Commands |
show chassis ha |
|
Notes |
This command is applicable only for modular switch systems. |
chassis ha
chassis ha reset other Performs a reset to the other management card in the chassis. |
||
Syntax Description |
N/A |
|
Default |
N/A |
|
Configuration Mode |
config |
|
History |
3.1.0000 |
|
Example |
switch (config) # chassis ha reset other |
|
Related Commands |
show chassis ha |
|
Notes |
This command is applicable only for modular switch systems. |
chassis ha power enable other
chassis ha power enable other no chassis ha power enable other Enables the other management card in the chassis. The no form of the command disables the other management card in the chassis. |
||
Syntax Description |
N/A |
|
Default |
The other management card is enabled |
|
Configuration Mode |
config |
|
History |
3.1.0000 |
|
Example |
switch (config) # chassis ha power enable other |
|
Related Commands |
show chassis ha |
|
Notes |
This command is applicable only for modular switch systems. |
show chassis ha
show chassis ha Displays chassis HA parameters and status. |
||
Syntax Description |
N/A |
|
Default |
The other management card is enabled |
|
Configuration Mode |
Any command mode |
|
History |
3.1.0000 |
|
Example |
switch (config) # show chassis ha |
|
Related Commands |
chassis ha |
|
Notes |
This command is applicable only for modular switch systems. |
chassis ha bipv6
ch assis ha bipv6 {ipv6 address} {ipv6 mask length} [force] The command configures the Box IPv6. |
||
Syntax Description |
ipv6 address |
The ipv6 box ip |
ipv6 mask length |
The mask for IPv6 box ip |
|
Default |
The other management card is enabled |
|
Configuration Mode |
Any command mode |
|
History |
3.8.1200 |
|
Example |
switch (config) # chassis ha bipv6 fdfd:fdfd:7:145::1033:47fd /64 |
|
Related Commands |
chassis ha |
|
Notes |