NVIDIA Onyx User Manual v3.10.4006
NVIDIA Onyx User Manual v3.10.4006

Chassis Management Commands

clear counters

clear counters [all | interface <type> <number>]

Clears switch counters.

Syntax Description

all

Clears all switch counters.

type

A specific interface type.

number

The interface number.

Default

N/A

Configuration Mode

config

History

3.2.3000

3.6.4000: Added note

Example

switch (config) # clear counters

Related Commands

Notes

The command also clears storm-control counters

clear system hardware events

clear system hardware events

Clears all active events.

Syntax Description

N/A

Default

N/A

Configuration Mode

config

History

3.6.6000

Example

switch (config) # clear system hardware events

Related Commands

show system hardware events

Notes

health

health {max-report-len <length> | re-notif-cntr <counter> | report-clear}

Configures health daemon settings.

Syntax Description

max-report-len <length>

Sets the length of the health report ( number of line entries)

Range: 10-2048

re-notif-cntr <counter>

Health control changes notification counter in seconds

Range: 120-7200

report-clear

Clears the health report

Default

max-report-len: 50

re-notif-cntr:

Configuration Mode

config

History

3.1.0000

Example

switch (config) # health re-notif-cntr 125

Related Commands

show health-report

Notes

led uid

led <module> uid <on | off>

Configures the UID LED.

Syntax Description

module

Specifies the module whose UID LED to configure

on

Turns on UID LED

off

Turns off UID LED

Default

N/A

Configuration Mode

config

History

3.6.1002

3.6.2002:

Example

switch (config) # led MGMT uid on

Related Commands

Notes

power enable

power enable <module name>

no power enable <module name>

Powers on the module.

The no form of the command shuts down the module.

Syntax Description

module name

Enables power for selected module

Default

Power is enabled on all modules

Configuration Mode

config

History

3.1.0000

Example

switch (config) # power enable L01

Related Commands

show power

show power consumers

Notes

  • It is recommended to run this command prior to extracting a module from the switch system, else errors are printed in the log

system profile

system profile {eth-default | eth-ipv6-max | eth-ipv4-mc-max} [force]

Optimizes switch system profile to preferred mode.

Syntax Description

eth-default

Balanced Ethernet profile

eth-ipv6-max

Optimized profile for IPv6 scale

eth-ipv4-mc-max

Optimized profile for IPv4 multicast scale

force

Forces operation, without the need for user confirmation

Default

eth-default

Configuration Mode

config

History

3.6.6000

Example

switch (config) # system profile eth-default

Related Commands

show system profile

Notes

usb eject

usb eject

Turns off the USB interface gracefully.

Syntax Description

N/A

Default

N/A

Configuration Mode

config

History

3.1.0000

Example

switch (config) # usb eject

Related Commands

Notes

Applicable only for systems with USB interface.


show asic-version

show asic-version

Displays firmware ASIC version.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.1.0000

3.4.2008: Updated example

Example

switch (config) # show asic-version

==================================================

Module Device Version

==================================================

MGMT SPC 15.0200.0092

Related Commands

Notes


show bios

show bios

Displays the BIOS version information.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.3.4150

Example

switch (config) # show bios

BIOS version : 4.6.5

BIOS subversion : Official AMI Release

BIOS release date : 07/02/2021

Related Commands

Notes


show cpld

show cpld

Displays status of all CPLDs in the system.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.1.0000

3.3.4302: Updated example

3.10.1000: Updated example to reflect the part number (PN) field

3.10.1100: Updated example to reflect Version Minor

Example

switch (config) # show cpld
    
----------------------------------------------------------------------------    

Name Type Version Version Minor PN

----------------------------------------------------------------------------

Cpld1 CPLD_TOR 9 1 0x0078

Cpld2 CPLD_SWB_UNIFIED 3 3 0x0128

Cpld3 CPLD_LED 1 0 0x00d1

Related Commands

Notes


show fan

show fan

Displays fans status.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.1.0000

Example

switch (config) # show fan

-----------------------------------------------------

Module Device Fan Speed Status

(RPM)

-----------------------------------------------------

FAN1 FAN F1 9305.00 OK

FAN2 FAN F1 8823.00 OK

FAN3 FAN F1 9057.00 OK

FAN4 FAN F1 9369.00 OK

PS1 FAN F1 10288.00 OK

PS2 FAN - - NOT PRESENT

Related Commands

Notes


show health-report

show health-report

Displays health report.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.1.0000

3.3.0000: Output update

Example

switch (config) # show health-report

========================

| ALERTS CONFIGURATION |

========================

Re-notification counter (sec):[3600]

Report max counter: [50]

========================

| HEALTH REPORT |

========================

No Health issues file

Related Commands

health

Notes


show inventory

show inventory

Displays system inventory.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.1.0000

3.4.1604: Removed CPU module output from example

3.5.1000: Removed Type column from example

3.6.1002: Updated example

Example

switch (config) # show inventory
-----------------------------------------------------------------------

Module Part Number Serial Number Asic Rev. HW Rev.

-----------------------------------------------------------------------

CHASSIS MSN2100-CB2F MT1752X06330 N/A B3

MGMT MSN2100-CB2F MT1752X06330 1 B3

Related Commands

Notes


show leds

show leds [<module>]

Displays the LED status of the switch system.

Syntax Description

module

Specifies the module whose LED status to display

Default

N/A

Configuration Mode

Any command mode

History

3.6.1002

3.6.2002: Updated example

Example

switch (config) # show leds

Module LED Status

--------------------------------------------

MGMT STATUS Green

MGMT FAN1 Green

MGMT FAN2 Green

MGMT FAN3 Green

MGMT FAN4 Green

MGMT PS_STATUS Green

MGMT PS1 Green

MGMT PS2 Green

MGMT UID Blue

Related Commands

Notes


show memory

show memory

Displays memory status.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.1.0000

3.7.1000: Updated example

Example

switch (config) # show memory
-----------------------------------------------------------------------

Memory Space Total Used Free Used+B/C Free-B/C

-----------------------------------------------------------------------

Physical 15848 MB 2849 MB 12999 MB 3854 MB 11994 MB

Swap 0 MB 0 MB 0 MB

Physical Memory Borrowed for System Buffers and Cache:

Buffers : 27 MB

Cache : 910 MB

Total Buffers/Cache: 937 MB

Related Commands

Notes


show module

show module

Displays modules status.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.1.0000

3.3.0000: Added “Is Fatal” column

3.4.2008: Updated command output

3.4.3000: Updated command output and added note

Example

switch (config) # show module

======================

Module Status

======================

MGMT ready

FAN1 ready

FAN2 ready

PS1 ready

PS2 not-present

Related Commands

Notes

The Status column may have one of the following values: error, fatal, not-present, powered-off, powered-on, ready.


show power

show power

Displays power supplies and power usage.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.1.0000

3.5.1000: Updated example

Example

switch (config) # show power
----------------------------------------------------------------------------------

Module Device Sensor Power Voltage Current Capacity Feed Status

[Watts] [Volts] [Amp] [Watts]

----------------------------------------------------------------------------------

PS1 power-mon input 32.25 12.11 1.26 800.00 DC OK

PS2 power-mon input 46.56 12.13 2.33 800.00 DC OK

Related Commands

Notes


show power consumers

show power consumers

Displays power consumption information.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.1.0000

3.5.1000: Updated example

Example

switch (config) # show power consumers
-------------------------------------------------------------------------

Module Device Sensor Power Voltage Current Status

[Watts] [Volts] [Amp]

-------------------------------------------------------------------------

MGMT CURR_MONITOR 12V 52.96 11.71 4.52 OK

PS1 power-mon input 252.00 12.00 20.25 OK

PS2 power-mon input 280.00 12.03 23.25 OK

Total power used : 52.96 Watts

Related Commands

Notes


show protocols

show protocols

Displays all protocols enabled in the system.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.2.3000

3.3.4550: Updated example

3.6.1002: Updated example

Example

switch (config) # show protocols

Ethernet enabled

spanning-tree rst

lacp disabled

lldp disabled

igmp-snooping disabled

ets enabled

priority-flow-control disabled

sflow disabled

openflow disabled

mlag disabled

dot1x disabled

isolation-group disabled

IP routing disabled

bgp disabled

pim disabled

vrrp disabled

ospf disabled

magp disabled

dhcp-relay disabled

Related Commands

Notes


show resources

show resources

Displays system resources.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.1.0000

Example

switch (config) # show resources

Total Used Free

Physical 2027 MB 761 MB 1266 MB

Swap 0 MB 0 MB 0 MB

Number of CPUs: 1

CPU load averages: 0.11 / 0.23 / 0.23

CPU 1

Utilization: 5%

Peak Utilization Last Hour: 19% at 2012/02/15 13:26:19

Avg. Utilization Last Hour: 7%

Related Commands

Notes


show system capabilities

show system capabilities

Displays system capabilities.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.1.0000

3.3.0000: Added gateway support

3.6.1002: Updated example

3.7.0000: Updated example

Example

switch (config) # show system capabilities

Ethernet: Supported, L2, L3

Ethernet Max licensed speed: 100Gb

Related Commands

show system profile

Notes

show system hardware events

show system hardware events <family-name> [clear-on-read]

Displays all active events.

Syntax Description

family-name

Displays all active events per event family:

  • ethernet

  • tunnel

  • ip

clear-on-read

Clears all active events after displaying them

Default

N/A

Configuration Mode

Any command mode

History

3.6.6000

Example

switch (config) # show system hardware events clear-on-read

Ethernet: smac is mc;

smac equal dmac;

IP: packet to router is not ip;

Tunnel:

Related Commands

Notes


show system mac

show system mac

Displays system MAC address.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.1.0000

Example

switch (config) # show system mac

00:02:c9:5e:AF:18

Related Commands

N/A

Notes

show system profile

show system profile

Displays system profile.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.2.0000

3.7.0000: Updated example

Example

switch (config) # show system profile

Profile: eth-default

Related Commands

system profile

Notes

show system profile detailed

show system profile detailed

Displays detailed system profile.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.6.6000

Example

switch (config) # show system profile detailed 

Profile: eth-default

-----------------------------------------------

Parameter Guaranteed Max Value

-----------------------------------------------

FDB size 102400

IPMC-L2 lists 10240

IPMC-L3 lists 10240

IPv4 MC/IGMP routes 10240

IPv4 neighbors 51200

IPv6 neighbors 8192

IPv4 routes 100000

IPv6 shorts 51200

IPv6 routes 21504

VRF 64

RIF 999

Related Commands

system profile

Notes

show system type

show system type

Displays system type.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.5.1000

Example

switch (config) # show system type

SN2100

Related Commands

Notes


show temperature

show temperature

Displays system temperature sensors status.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.1.0000

Example

switch (config) # show temperature

---------------------------------------------------------

Module Component Reg CurTemp Status

(Celsius)

---------------------------------------------------------

MGMT SPC T1 43.00 OK

MGMT Ports AMB temp T1 31.00 OK

MGMT Board AMB temp T1 30.00 OK

MGMT CPU Core Sensor T1 23.00 OK

MGMT CPU Core Sensor T2 23.00 OK

MGMT CPU Core Sensor T3 24.00 OK

MGMT CPU Core Sensor T4 24.00 OK

Related Commands

Notes


show version

show version

Displays version information for the currently running system image.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.1.0000

Example

switch (config) # show version

Product name: Onyx

Product release: 3.6.8008

Build ID: #1-dev

Build date: 2018-07-18 13:46:44

Target arch: x86_64

Target hw: x86_64

Built by: jenkins@c5de6027485e

Version summary: X86_64 3.6.8008 2018-07-18 13:46:44 x86_64

Product model: x86

Host ID: 7CFE9058E01E

System UUID: 03000200-0400-0500-0006-000700080009

Uptime: 16h 50m 41.260s

CPU load averages: 2.38 / 2.25 / 2.24

Number of CPUs: 2

System memory: 2860 MB used / 12988 MB free / 15848 MB total

Swap: 0 MB used / 0 MB free / 0 MB total

Related Commands

Notes


show version concise

show version concise

Displays concise version information for the currently running system image.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.1.0000

Example

switch (config) # show version concise

X86_64 3.6.4006 2017-07-03 16:17:39 x86_64

Related Commands

Notes


show voltage

show voltage

Displays voltage level measurements on different sensors.

Syntax Description

N/A

Default

N/A

Configuration Mode

Any command mode

History

3.1.0000

3.3.5006: Updated example

Example

switch (config) # show voltage
============================================================================================

Module Power Meter Reg Expected Actual Status High Low

Voltage Voltage Range Range

============================================================================================

MGMT BOARD_MONITOR USB 5V sensor 5.00 5.15 OK 5.55 4.45

MGMT BOARD_MONITOR Asic I/O sensor 2.27 2.11 OK 2.55 1.99

MGMT BOARD_MONITOR 1.8V sensor 1.80 1.79 OK 2.03 1.57

MGMT BOARD_MONITOR SYS 3.3V sensor 3.30 3.28 OK 3.68 2.92

MGMT BOARD_MONITOR CPU 0.9V sensor 0.90 0.93 OK 1.04 0.76

MGMT BOARD_MONITOR 1.2V sensor 1.20 1.19 OK 1.37 1.03

MGMT CPU_BOARD_MONITOR 12V sensor 12.00 11.67 OK 13.25 10.75

MGMT CPU_BOARD_MONITOR 12V sensor 2.50 2.46 OK 2.80 2.20

MGMT CPU_BOARD_MONITOR 2.5V sensor 3.30 3.26 OK 3.68 2.92

MGMT CPU_BOARD_MONITOR SYS 3.3V sensor 3.30 3.24 OK 3.68 2.92

MGMT CPU_BOARD_MONITOR SYS 3.3V sensor 1.80 1.79 OK 2.03 1.57

MGMT CPU_BOARD_MONITOR 1.8V sensor 1.20 1.24 OK 1.37 1.03

Related Commands

Notes

© Copyright 2023, NVIDIA. Last updated on Mar 5, 2024.