NVIDIA Onyx User Manual v3.10.4408 LTS

Image Maintenance Using ONIE

ONIE is an “open compute” Open Network Install Environment for bare metal network switches. ONIE enables a bare metal network switch ecosystem where end-users have a choice among different network operating systems.

NVIDIA Onyx is distributed in way that allows installation on an ONIE environment. Certain switch models come pre-installed with ONIE and NVIDIA Onyx and support changing to a different operating system (OS).

To change the switch system’s operating OS:

  1. Reboot the switch and wait for it to reach the GRUB menu:

    Copy
    Copied!
                

    GNU GRUB version 2.02   X86_64 3.4.1932 2015-04-24 18:04:12 x86_64 1 X86_64 3.4.1932 2015-04-24 18:04:12 x86_64 2 ONIE

  2. Select the ONIE option using the arrow keys. The following message appears:

    Copy
    Copied!
                

    Due to security constraints, this option will uninstall your current MLNX OS system. Are you sure ?

  3. Type YES to continue.
    Since NVIDIA Onyx is being uninstalled and deleted from the hard drive, the process takes a few hours. After this is finished, the system reboots into the ONIE shell and auto discovery begins.

    Copy
    Copied!
                

    Info: Fetching tftp://<ip-address>/7C-FE-90-5E-6A-4A/onie-installer-x86_64-mlnx_x86-r5.0.1400 ... Failure: Unable to find installer: /installer Info: Fetching tftp://<ip-address>/0AE016FB/onie-installer-x86_64-mlnx_x86-r5.0.1400 ... Failure: Unable to find installer: /installer Info: Fetching tftp://<ip-address>/0AE016F/onie-installer-x86_64-mlnx_x86-r5.0.1400 ... ...

  4. In order to manually insert an install URL, press Enter and insert the command “onie-nos-install < http> / <tftp> <url> <image name .bin>”. For example:

    Copy
    Copied!
                

    onie-nos-install http://<ip_address>//sx_mlnx_os-3.5.1000-21/X86_64/X86_64-3.5.1000-21-installer.bin

    Once you hit Enter, you have about 4 second to insert the command so it is recommended to prepare the command in advance and simply pasting it in. At this stage, the OS installation begins.

  5. Wait for the installation to end and reboot this switch to boot into the OS.

    Copy
    Copied!
                

    ONIE:/ # onie-nos-install http://<ip_address>//sx_mlnx_os-3.5.1000-21/X86_ 64/X86_64-3.5.1000-21-installer.bin Stopping: discover... done. down. ONIE: eth1: link down. Skipping configuration. ONIE: Failed to configure eth1 interface Info: Fetching http://<ip_address>//sx_mlnx_os-3.5.1000-21/X86_64/X86_64-3.5.1000-21-installer.bin ... Connecting to <ip_address> installer 100% |*******************************| 392M 0:00:00 ETA ONIE: Executing installer: http://<ip_address>//sx_mlnx_os-3.5.1000-21/X86_64/X86_64-3.5.1000-21-installer.bin

Last updated on Mar 27, 2024.