NVIDIA Onyx User Manual v3.10.4408 LTS

MLAG VIP Configuration

MLAG VIP (Virtual IP) is important for retrieving peer information.

The management network is used for keep-alive messages between the switches.

The MLAG domain must be unique name for each MLAG domain. In case you have more than one pair of MLAG switches on the same network, each domain (consist of two switches) should be configured with different name.

The IP address should be within the subnet of the management interface (mgmt0).

  1. Configure the following on both switches:

    Copy
    Copied!
                

    sx01 (config)# mlag-vip my-mlag-vip-domain ip 10.209.28.200 /24 force

  2. Set a virtual system MAC. The System MAC is used to identify the far-end switch used for the LACP System ID. It should be unicastrange.

    Copy
    Copied!
                

    switch (config)# mlag system-mac 00:00:5e:00:01:5d

    In case of an upgrade the MAC address is auto-calculated. For new MLAG installation, it must be added as configuration.

    The MLAG system-mac needs to be identical between both switches.

  3. Enable MLAG globally, run:

    Copy
    Copied!
                

    switch config) # no mlag shutdown

Last updated on Mar 27, 2024.