iSCSI General Parameters
In the following menu, you can set the following options:
Location: | System setup/Port main configurations/iSCSI Configuration/iSCSI General Parameters |
Description: | When the DHCP IP is enabled, the initiator and target's IP, netmask, gateway and DNS will be taken from DHCP instead of from the menu. |
Configurable: | Yes |
Location: | System setup/Port main configurations/iSCSI Configuration/iSCSI General Parameters |
Description: | When the DHCP IP and DHCP Parameters are enabled, all the initiator and target parameters are taken from DHCP instead of from the menu. |
Configurable: | Yes |
Location: | System setup/Port main configurations/iSCSI Configuration/iSCSI General Parameters |
Description: | Specifies whether IPv4 or IPv6 network addressing will be used for iSCSI initiator and targets |
Configurable: | No |
Location: | System setup/Port main configurations/iSCSI Configuration/iSCSI General Parameters |
Description: | Enables CHAP Authentication for iSCSI initiator. |
Configurable | Yes |
Location: | System setup/Port main configurations/iSCSI Configuration/iSCSI General Parameters |
Description: | Enables mutual CHAP authentication between the iSCSI initiator and target |
Configurable: | Yes |
Location: | System setup/Port main configurations/iSCSI Configuration/iSCSI General Parameters |
Description: | Controls booting to ISCSI target after connection. |
Configurable: | Yes |
Available options: | 1 - Enable 2 - Disable 3 - One time disabled |