User Manual Revision History

17

January 31, 2023

No changes to the User Manual.

16

November 30, 2022

Added "Management PF" as a new setting under HII VMware Configuration.

The version has been changed due to firmware versions updates. See, NVIDIA PreBoot Drivers (FlexBoot & UEFI).

15

October 31, 2022

Added the following new sections:

• HII VMware Configuration

• VMware Distributed Services Engine (DPU)

14

July 31, 2022

Added RT PPS ENABLED ONPOWERUP to the following sections:

• System Setup

• HII Power Configuration

13.0

November 30, 2021

Added the following few sections:

• Cross Signed CA URI & Trust CA fingerprint in the NIC Configuration

• How to use HTTPs and Private Root Certificate Trust

12.0

June 30, 2021

Added the following few sections:

• NIC + RDMA Mode (in the Partition N Configuration)

• NIC + RDMA Mode (in the system Setup)

11.0

December 31, 2020

Added the following new sections:

• BlueField / BlueField-2 Embedded CPU Mode in InfiniBand

• Flexboot ipxe.pxe Chainloading

Added the following new sections in the FlexBoot System Settings:

• Flow Control Setting

• Port GUID

• Node GUID

• Virtual Node GUID

• Permit Total Port Shutdown

• IPv6 Default Gateway

• IPv6 Address

• IPv6 Primary DNS

• IPv6 Prefix Length

Added the following new sections in the HII System Settings:

• IPv6 Address

• IPv4/IPv6 Support

• IPv6 Default Gateway

• IPv6 Address

• IPv6 Primary DNS

• IPv6 Prefix Length

• IPv6 Address

10.0

July 02, 2020

• Removed: InfiniBand Mode Only (see Main Configuration section)

• Updated: HII NIC Configuration

9.0

February 29, 2020

• Added: Virtual Node GUID (InfiniBand Mode Only) (see Main Configuration section)

• Updated: HII NIC Configuration

• Removed: Virtual Port GUID (InfiniBand Mode Only)

8.0

September 26, 2019

• Added the following sections:

  • SNAPI Operation

  • Node GUID

  • Port GUID

  • Virtual Port GUID

  • Socket Direct Operation

7.0

April 30, 2019

• Added the following section:

  • NIC Partitioning Configuration

6.0

November 29, 2018

• Added the following new sections:

  • General Settings

  • Pci Settings

  • Expansion Rom Uefi Arm

  • Expansion Rom Uefi X86

5.0

July 05th, 20018

• Added the following sections:

  • Link Speed (FlexBoot related configuration)

  • Link Speed (UEFI related configuration)

  • Updated the following FlexBoot sections:

  • Legacy Boot Protocol

  • IPv4 Address

  • IPv4 Primary DNS

  • IPv4 Default Gateway

  • iSCSI Name

  • Subnet Mask

  • Boot LUN

  • iSCSI Name

  • IP Address

  • TCP Port

• Updated the following UEFI sections:

  • Legacy Boot Protocol

  • Virtual LAN Mode

  • IPv4 Address

  • IPv4 Primary DNS

  • IPv4 Default Gateway

  • iSCSI Name

  • Subnet Mask

  • Boot LUN

  • iSCSI Name

  • IP Address

  • TCP Port